[Sun Jun  3 19:06:26 2012] Detection parameters:
  Position = (343.2, 437.0) = 20 8 7.99 -60 55 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1763.9 +/- 59.4
  Background counts = 321.5
  Rate = 0.02 +/- 0.0005

[Sun Jun  3 19:06:26 2012] Off-axis axis estimate = 10.56'
[Sun Jun  3 19:16:48 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 19:16:48 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Sun Jun  3 19:16:48 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Sun Jun  3 19:16:48 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 11.71"
[Sun Jun  3 23:37:18 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src58.ximg exists
[Sun Jun  3 23:37:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src58.csv
[Sun Jun  3 23:37:18 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src58_1.ximg exists
[Sun Jun  3 23:37:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src58.csv
[Sun Jun  3 23:37:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 23:37:19 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sun Jun  3 23:37:19 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun Jun  3 23:37:19 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sun Jun  3 23:37:19 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun Jun  3 23:37:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 01:47:49 2012] Spatial fit model total counts = 5489.990000, observed total counts = 5487.000000
[Mon Jun  4 01:47:49 2012] Offset between fit and detection position for source 61 = 1.710944 pixels
[Mon Jun  4 01:47:49 2012] Warning, changing simple spatial fit ID from 58 to 3
[Mon Jun  4 01:47:49 2012] 5095.700000 total counts/ 1776.830000 bgd. counts: snr = 78.734904
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.710944 pixels
  Position = (342.9, 435.3) = 20 8 8.19 -60 55 18.0
  Extent = 17.6 (16.7-18.8)", rotation angle = 0
  Source counts = 3318.9 +/- 71.4
  Background counts = 1776.8
  Rate = 0.06 +/- 0.001
[Mon Jun  4 01:47:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 01:47:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 01:47:50 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 01:47:50 2012] Source does appear to be extended
[Mon Jun  4 01:47:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 01:47:50 2012] Source is confused with source 3
[Mon Jun  4 01:48:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 01:48:14 2012] Initial guess for spatial extent in simple fitting = 17.62"
[Mon Jun  4 01:48:14 2012] source mask rpix=4.1, npix_max = 82, mask sum = 81, frac = 0.978
[Mon Jun  4 01:48:14 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 17.62"
[Mon Jun  4 05:33:22 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src56.ximg exists
[Mon Jun  4 05:33:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src56.csv
[Mon Jun  4 05:33:22 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src56_1.ximg exists
[Mon Jun  4 05:33:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src56.csv
[Mon Jun  4 05:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 05:33:23 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Mon Jun  4 05:33:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Mon Jun  4 05:33:23 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Mon Jun  4 05:33:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Mon Jun  4 05:33:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 00:15:54 2012] Spatial fit model total counts = 5612.870000, observed total counts = 5487.000000
[Tue Jun  5 00:15:54 2012] Offset between fit and detection position for source 61 = 2.224968 pixels
[Tue Jun  5 00:15:54 2012] Warning, changing simple spatial fit ID from 56 to 3
[Tue Jun  5 00:15:54 2012] 3454.950000 total counts/ 1430.180000 bgd. counts: snr = 53.540244
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 2.224968 pixels
  Position = (343.5, 437.5) = 20 8 7.84 -60 55 8.7
  Extent = 13.7 (11.1-16.1)", rotation angle = 0
  Source counts = 2024.8 +/- 58.8
  Background counts = 1430.2
  Rate = 0.04 +/- 0.001
[Tue Jun  5 00:15:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 00:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 00:15:54 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 00:15:54 2012] Source does appear to be extended
[Tue Jun  5 00:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 00:16:36 2012] Counts = 2024.770000, rescaling region sizes by 2.000000
[Tue Jun  5 00:16:36 2012] XMMSAS src. selection expression = ellipse(29834.656000, 38012.380000, 1646.172047, 1646.172047, 0.000000, X, Y)
[Tue Jun  5 00:16:36 2012] Writing source region out to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src61_src.reg
[Tue Jun  5 00:16:36 2012] Extracting stamp from image fullrun_pn_xmm0552170301_pi300-10000_cl_sm2.00.img.gz, (249, 343) - (438, 532)
[Tue Jun  5 00:16:37 2012] XMMSAS bgd. selection expression = annulus(29834.656000, 38012.380000, 5487.240158, 10974.480316, X, Y) && !ellipse(19688.876282, 35861.047363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30151.305969, 37547.941467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.212000, 36864.084000, 1301.248037, 1301.248037, 0.000000, X, Y) && !ellipse(29087.374000, 36305.268000, 1238.592036, 1238.592036, 0.000000, X, Y) && !ellipse(28910.620000, 35875.274000, 1376.432040, 1376.432040, 0.000000, X, Y) && !ellipse(28648.859406, 35360.563721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19313.021042, 34491.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27973.979680, 33802.818400, 1571.456045, 402.312012, 114.373100, X, Y) && !ellipse(27828.436000, 33388.776000, 1320.176038, 1320.176038, 0.000000, X, Y) && !ellipse(20046.768921, 33121.978424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27150.904000, 31851.492000, 1398.120040, 1398.120040, 0.000000, X, Y) && !ellipse(27198.016300, 32014.130200, 1814.176052, 406.403212, 113.547000, X, Y) && !ellipse(26939.652435, 31363.241882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26726.453000, 30920.301400, 1367.200039, 380.092811, 113.251800, X, Y) && !ellipse(26599.119400, 30623.520400, 1398.120040, 404.609612, 113.828000, X, Y) && !ellipse(26407.230400, 30184.229800, 2683.232077, 446.542413, 293.633000, X, Y) && !ellipse(23558.313324, 30285.353088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32060.944560, 29784.542600, 382.250411, 382.250411, 0.000000, X, Y) && !ellipse(26053.410000, 29356.804000, 2222.584064, 2222.584064, 0.000000, X, Y) && !ellipse(18507.949783, 29319.166687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.939400, 29099.314200, 1229.016035, 407.577612, 294.013000, X, Y) && !ellipse(27499.228400, 28515.227600, 412.338412, 412.338412, 0.000000, X, Y) && !ellipse(25738.948000, 28600.760000, 1177.272034, 1177.272034, 0.000000, X, Y) && !ellipse(31025.404900, 28129.964600, 574.939217, 574.939217, 0.000000, X, Y) && !ellipse(25405.468000, 27882.928000, 1136.072033, 1136.072033, 0.000000, X, Y) && !ellipse(22928.688460, 27978.153800, 444.469613, 444.469613, 0.000000, X, Y) && !ellipse(25185.001984, 27352.987396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22538.192000, 26129.725800, 1135.584033, 1135.584033, 0.000000, X, Y)
[Tue Jun  5 00:16:37 2012] Writing fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src61.gif
[Tue Jun  5 03:38:45 2012] Mean detx,y = (145.73, 13510.01) 
[Tue Jun  5 03:38:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 03:42:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 03:42:31 2012] Setting source spectrum file to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Jun  5 03:42:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Tue Jun  5 08:49:18 2012] Updating aperture counts using extracted products
[Tue Jun  5 08:49:18 2012] Error reading totcts from fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Jun  5 08:49:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 08:49:22 2012] Using photon index=1.80, rate=0.0353, arf fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src61.arf
[Tue Jun  5 08:49:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 08:49:22 2012] Updating source flux to 2.2e-13
[Tue Jun  5 08:52:24 2012] Flag c found in src. 61 procflags, skipping spectral fitting