[Sun Jun  3 19:06:25 2012] Detection parameters:
  Position = (321.2, 223.0) = 20 8 21.05 -61 10 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.0 +/- 27.3
  Background counts = 395.1
  Rate = 0.002 +/- 0.0002

[Sun Jun  3 19:06:26 2012] Off-axis axis estimate = 5.71'
[Sun Jun  3 19:16:48 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 19:16:48 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Jun  3 19:16:48 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.793
[Sun Jun  3 19:16:48 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 9.28"
[Sun Jun  3 23:37:17 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src54.ximg exists
[Sun Jun  3 23:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src54.csv
[Sun Jun  3 23:37:17 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun Jun  3 23:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src54.csv
[Sun Jun  3 23:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 23:37:19 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun Jun  3 23:37:19 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun Jun  3 23:37:19 2012] Fit fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Mon Jun  4 01:47:49 2012] Source 56 is offset by 3.226454 and 0.214255 pixels which is larger than
2 X fitted extent = 2.246193 x 2.246193, not incorporating fit results
[Mon Jun  4 01:47:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 01:47:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 01:47:50 2012] Assessing source extent using major
[Mon Jun  4 01:47:50 2012] Source does appear to be extended
[Mon Jun  4 01:47:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 01:48:14 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 01:48:14 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Mon Jun  4 01:48:14 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.793
[Mon Jun  4 01:48:14 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 9.28"
[Mon Jun  4 05:33:22 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src52.ximg exists
[Mon Jun  4 05:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src52.csv
[Mon Jun  4 05:33:22 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src52_1.ximg exists
[Mon Jun  4 05:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src52.csv
[Mon Jun  4 05:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 05:33:23 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Mon Jun  4 05:33:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src52.csv
[Mon Jun  4 05:33:23 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Mon Jun  4 05:33:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src52.csv
[Mon Jun  4 05:33:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 00:15:54 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 11.264205 pixels away
[Tue Jun  5 00:15:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 00:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 00:15:54 2012] Assessing source extent using major
[Tue Jun  5 00:15:54 2012] Source does appear to be extended
[Tue Jun  5 00:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 00:16:36 2012] XMMSAS src. selection expression = ellipse(27891.841522, 19353.211548, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  5 00:16:36 2012] Writing source region out to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src56_src.reg
[Tue Jun  5 00:16:36 2012] Extracting stamp from image fullrun_pn_xmm0552170301_pi300-10000_cl_sm2.00.img.gz, (284, 186) - (359, 261)
[Tue Jun  5 00:16:36 2012] XMMSAS bgd. selection expression = annulus(27891.841522, 19353.211548, 1087.500000, 2175.000000, X, Y) && !ellipse(30045.739349, 20616.305893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27225.997345, 16327.468475, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  5 00:16:36 2012] Writing fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src56.gif
[Tue Jun  5 03:32:26 2012] Mean detx,y = (-5389.01, -3766.64) 
[Tue Jun  5 03:32:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 03:32:49 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 03:32:50 2012] Setting source spectrum file to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Jun  5 03:32:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Tue Jun  5 06:29:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 06:29:35 2012] rmf not generated due to insufficient counts
[Tue Jun  5 08:49:17 2012] Updating aperture counts using extracted products
[Tue Jun  5 08:49:18 2012] Error reading totcts from fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Jun  5 08:49:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 08:49:22 2012] Using photon index=1.80, rate=0.00161, arf fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src56.arf
[Tue Jun  5 08:49:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 08:49:22 2012] Updating source flux to 8.5e-15
[Tue Jun  5 08:52:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting