[Sun Jun  3 19:06:24 2012] Detection parameters:
  Position = (316.8, 328.2) = 20 8 23.71 -61 3 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1883.8 +/- 60.8
  Background counts = 438.3
  Rate = 0.02 +/- 0.0007

[Sun Jun  3 19:06:26 2012] Off-axis axis estimate = 2.54'
[Sun Jun  3 19:16:48 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 19:16:48 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Sun Jun  3 19:16:48 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Sun Jun  3 19:16:48 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.70"
[Sun Jun  3 23:37:17 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun  3 23:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src31.csv
[Sun Jun  3 23:37:17 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun  3 23:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src31.csv
[Sun Jun  3 23:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 23:37:18 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun  3 23:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun  3 23:37:18 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun  3 23:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun  3 23:37:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 01:47:49 2012] Warning, spatial fit 31 centroid is now closest to src. 35
[Mon Jun  4 01:47:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 01:47:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 01:47:50 2012] Assessing source extent using major
[Mon Jun  4 01:47:50 2012] Source does appear to be extended
[Mon Jun  4 01:47:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 01:48:14 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 01:48:14 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Mon Jun  4 01:48:14 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Mon Jun  4 01:48:14 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.70"
[Mon Jun  4 05:33:22 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src29.ximg exists
[Mon Jun  4 05:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src29.csv
[Mon Jun  4 05:33:22 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Jun  4 05:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src29.csv
[Mon Jun  4 05:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 05:33:23 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Jun  4 05:33:23 2012] fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Jun  4 05:33:23 2012] Fit fullrun_pn_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Jun  5 00:15:54 2012] Source 33 is offset by 8.906677 and 2.113892 pixels which is larger than
2 X fitted extent = 1.175715 x 1.175715, not incorporating fit results
[Tue Jun  5 00:15:54 2012] Spatial fit model total counts = 2583.460000, observed total counts = 2435.000000
[Tue Jun  5 00:15:54 2012] Offset between fit and detection position for source 33 = 0.204296 pixels
[Tue Jun  5 00:15:54 2012] 2573.933000 total counts/ 1664.350000 bgd. counts: snr = 22.295643
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.204296 pixels
  Position = (316.6, 328.3) = 20 8 23.81 -61 3 3.7
  Extent = 5.2 (4.8-5.4)", rotation angle = 0
  Source counts = 909.6 +/- 50.7
  Background counts = 1664.3
  Rate = 0.02 +/- 0.0009
[Tue Jun  5 00:15:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 00:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 00:15:54 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 00:15:54 2012] Source does appear to be extended
[Tue Jun  5 00:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 00:15:54 2012] Source is confused with source 26
[Tue Jun  5 00:16:35 2012] XMMSAS src. selection expression = ellipse(27499.228400, 28515.227600, 309.253809, 309.253809, 0.000000, X, Y)
[Tue Jun  5 00:16:35 2012] Writing source region out to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src33_src.reg
[Tue Jun  5 00:16:35 2012] Extracting stamp from image fullrun_pn_xmm0552170301_pi300-10000_cl_sm2.00.img.gz, (299, 311) - (334, 346)
[Tue Jun  5 00:16:35 2012] XMMSAS bgd. selection expression = annulus(27499.228400, 28515.227600, 515.423015, 1030.846030, X, Y) && !ellipse(26599.119400, 30623.520400, 1398.120040, 404.609612, 113.828000, X, Y) && !ellipse(26407.230400, 30184.229800, 2683.232077, 446.542413, 293.633000, X, Y) && !ellipse(26053.410000, 29356.804000, 2222.584064, 2222.584064, 0.000000, X, Y) && !ellipse(25943.939400, 29099.314200, 1229.016035, 407.577612, 294.013000, X, Y) && !ellipse(25738.948000, 28600.760000, 1177.272034, 1177.272034, 0.000000, X, Y) && !ellipse(25405.468000, 27882.928000, 1136.072033, 1136.072033, 0.000000, X, Y)
[Tue Jun  5 00:16:35 2012] Writing fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src33.gif
[Tue Jun  5 02:44:13 2012] Mean detx,y = (-1480.44, 4487.41) 
[Tue Jun  5 02:44:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 02:44:52 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 02:44:53 2012] Setting source spectrum file to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jun  5 02:44:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jun  5 08:49:14 2012] Updating aperture counts using extracted products
[Tue Jun  5 08:49:14 2012] Error reading totcts from fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jun  5 08:49:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 08:49:20 2012] Using photon index=1.80, rate=0.0159, arf fullrun_pn_xmm0552170301_pi300-10000_pass1_cl_src33.arf
[Tue Jun  5 08:49:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 08:49:20 2012] Updating source flux to 6.1e-14
[Tue Jun  5 08:52:24 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Tue Jun  5 08:52:24 2012] Flag c found in src. 33 procflags, skipping spectral fitting