[Sun Jun  3 19:07:21 2012] Detection parameters:
  Position = (199.1, 152.2) = 20 9 34.66 -61 15 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.8 +/- 25.3
  Background counts = 166.7
  Rate = 0.002 +/- 0.0002

[Sun Jun  3 19:07:21 2012] Off-axis axis estimate = 12.82'
[Mon Jun  4 00:17:00 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 00:17:00 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Mon Jun  4 00:17:00 2012] source mask rpix=3.0, npix_max = 47, mask sum = 48, frac = 1.007
[Mon Jun  4 00:17:00 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.84"
[Mon Jun  4 01:47:36 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_src20.ximg exists
[Mon Jun  4 01:47:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_src20.csv
[Mon Jun  4 01:47:36 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Jun  4 01:47:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_src20.csv
[Mon Jun  4 01:47:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 01:47:37 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Jun  4 01:47:37 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Jun  4 01:47:37 2012] Fit fullrun_mos2_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Jun  4 01:48:00 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 12.175691 pixels away
[Mon Jun  4 01:48:00 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 01:48:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 01:48:00 2012] Assessing source extent using major
[Mon Jun  4 01:48:00 2012] Source does appear to be extended
[Mon Jun  4 01:48:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 06:03:37 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 06:03:37 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Mon Jun  4 06:03:37 2012] source mask rpix=3.0, npix_max = 47, mask sum = 48, frac = 1.007
[Mon Jun  4 06:03:37 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 12.84"
[Tue Jun  5 00:15:31 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_src19.ximg exists
[Tue Jun  5 00:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_src19.csv
[Tue Jun  5 00:15:31 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Jun  5 00:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_src19.csv
[Tue Jun  5 00:15:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 00:15:32 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Jun  5 00:15:32 2012] fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Jun  5 00:15:32 2012] Fit fullrun_mos2_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Jun  5 00:16:10 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 16.073737 pixels away
[Tue Jun  5 00:16:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 00:16:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 00:16:11 2012] Assessing source extent using major
[Tue Jun  5 00:16:11 2012] Source does appear to be extended
[Tue Jun  5 00:16:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 07:30:59 2012] XMMSAS src. selection expression = ellipse(17270.445938, 13190.872620, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  5 07:30:59 2012] Writing source region out to fullrun_mos2_xmm0552170301_pi300-10000_pass1_cl_src37_src.reg
[Tue Jun  5 07:30:59 2012] Extracting stamp from image fullrun_mos2_xmm0552170301_pi300-10000_cl_sm2.00.img.gz, (162, 115) - (237, 190)
[Tue Jun  5 07:30:59 2012] XMMSAS bgd. selection expression = annulus(17270.445938, 13190.872620, 1087.500000, 2175.000000, X, Y)
[Tue Jun  5 07:30:59 2012] Writing fullrun_mos2_xmm0552170301_pi300-10000_pass1_cl_src37.gif
[Tue Jun  5 07:54:34 2012] Mean detx,y = (-1551.39, 13496.84) 
[Tue Jun  5 07:54:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 07:54:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 07:54:53 2012] Setting source spectrum file to fullrun_mos2_xmm0552170301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun  5 07:54:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552170301_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jun  5 08:24:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 08:24:41 2012] rmf not generated due to insufficient counts
[Tue Jun  5 08:49:26 2012] Updating aperture counts using extracted products
[Tue Jun  5 08:49:26 2012] Error reading totcts from fullrun_mos2_xmm0552170301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun  5 08:49:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 08:49:28 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0552170301_pi300-10000_pass1_cl_src37.arf
[Tue Jun  5 08:49:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 08:49:28 2012] Updating source flux to 4.5e-14
[Tue Jun  5 08:50:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting