[Sun Jun  3 19:06:51 2012] Detection parameters:
  Position = (255.5, 292.8) = 20 9 0.49 -61 5 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.8 +/- 31.8
  Background counts = 336.6
  Rate = 0.001 +/- 0.0003

[Sun Jun  3 19:06:52 2012] Off-axis axis estimate = 3.14'
[Sun Jun  3 23:37:19 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 23:37:19 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Sun Jun  3 23:37:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Sun Jun  3 23:37:19 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.00"
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun  4 00:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src21.csv
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun  4 00:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src21.csv
[Mon Jun  4 00:17:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun  4 00:17:00 2012] Fit fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Jun  4 01:47:54 2012] Source 17 is offset by -6.239300 and 1.659351 pixels which is larger than
2 X fitted extent = 1.219462 x 1.219462, not incorporating fit results
[Mon Jun  4 01:47:54 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 01:47:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 01:47:54 2012] Assessing source extent using major
[Mon Jun  4 01:47:54 2012] Source does appear to be extended
[Mon Jun  4 01:47:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 01:47:54 2012] Source is confused with source 16
[Mon Jun  4 05:33:23 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 05:33:23 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Mon Jun  4 05:33:23 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Mon Jun  4 05:33:23 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.00"
[Mon Jun  4 06:03:37 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jun  4 06:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src19.csv
[Mon Jun  4 06:03:37 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jun  4 06:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src19.csv
[Mon Jun  4 06:03:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 06:03:37 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jun  4 06:03:37 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jun  4 06:03:37 2012] Fit fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Jun  5 00:16:01 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 16.435728 pixels away
[Tue Jun  5 00:16:01 2012] Source 17 is offset by -6.236633 and 1.665075 pixels which is larger than
2 X fitted extent = 1.234892 x 1.234892, not incorporating fit results
[Tue Jun  5 00:16:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 00:16:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 00:16:01 2012] Assessing source extent using major
[Tue Jun  5 00:16:01 2012] Source does appear to be extended
[Tue Jun  5 00:16:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 06:39:49 2012] XMMSAS src. selection expression = ellipse(22178.418930, 25422.385498, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  5 06:39:49 2012] Writing source region out to fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src17_src.reg
[Tue Jun  5 06:39:49 2012] Extracting stamp from image fullrun_mos1_xmm0552170301_pi300-10000_cl_sm2.00.img.gz, (218, 255) - (293, 330)
[Tue Jun  5 06:39:49 2012] XMMSAS bgd. selection expression = annulus(22178.418930, 25422.385498, 1087.500000, 2175.000000, X, Y) && !ellipse(24160.062600, 24988.573000, 1623.482367, 1623.482367, 0.000000, X, Y) && !ellipse(22371.780731, 23722.412720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22470.714000, 26070.606400, 1274.896037, 1274.896037, 0.000000, X, Y) && !ellipse(23113.322449, 23320.786438, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  5 06:39:49 2012] Writing fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src17.gif
[Tue Jun  5 06:56:43 2012] Mean detx,y = (524.08, 1808.58) 
[Tue Jun  5 06:56:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 06:56:54 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 06:56:55 2012] Setting source spectrum file to fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jun  5 06:56:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jun  5 07:30:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 07:30:29 2012] rmf not generated due to insufficient counts
[Tue Jun  5 08:49:24 2012] Updating aperture counts using extracted products
[Tue Jun  5 08:49:24 2012] Error reading totcts from fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jun  5 08:49:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 08:49:25 2012] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src17.arf
[Tue Jun  5 08:49:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 08:49:25 2012] Updating source flux to 1.4e-14
[Tue Jun  5 08:49:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting