[Sun Jun  3 19:06:50 2012] Detection parameters:
  Position = (278.3, 287.9) = 20 8 46.78 -61 5 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282322.2 +/- 630.3
  Background counts = 341.9
  Rate = 2 +/- 0.005

[Sun Jun  3 19:06:52 2012] Off-axis axis estimate = 1.65'
[Sun Jun  3 23:37:19 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 23:37:19 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jun  3 23:37:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sun Jun  3 23:37:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun  4 00:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src1.csv
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun  4 00:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src1.csv
[Mon Jun  4 00:17:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun  4 00:17:00 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun  4 00:17:00 2012] Fit fullrun_mos1_xmm0552170301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun  4 01:47:54 2012] Spatial fit model total counts = 187870.000000, observed total counts = 196441.000000
[Mon Jun  4 01:47:54 2012] Offset between fit and detection position for source 1 = 0.118240 pixels
[Mon Jun  4 01:47:54 2012] 187637.000000 total counts/ 25600.000000 bgd. counts: snr = 1012.731250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.118240 pixels
  Position = (278.3, 287.8) = 20 8 46.83 -61 6 0.0
  Extent = 6.8 (6.7-6.8)", rotation angle = 0
  Source counts = 162037.0 +/- 433.2
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Mon Jun  4 01:47:54 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 01:47:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 01:47:54 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 01:47:54 2012] Source does appear to be extended
[Mon Jun  4 01:47:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 05:33:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 05:33:23 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Mon Jun  4 05:33:23 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Mon Jun  4 05:33:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.76"
[Mon Jun  4 06:03:36 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun  4 06:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src1.csv
[Mon Jun  4 06:03:36 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun  4 06:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src1.csv
[Mon Jun  4 06:03:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 06:03:37 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun  4 06:03:37 2012] fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun  4 06:03:37 2012] Fit fullrun_mos1_xmm0552170301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun  5 00:16:01 2012] Spatial fit model total counts = 187937.000000, observed total counts = 196441.000000
[Tue Jun  5 00:16:01 2012] Offset between fit and detection position for source 1 = 0.000117 pixels
[Tue Jun  5 00:16:01 2012] 187704.000000 total counts/ 25600.000000 bgd. counts: snr = 1013.150000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000117 pixels
  Position = (278.3, 287.8) = 20 8 46.83 -61 6 0.0
  Extent = 6.8 (6.7-6.8)", rotation angle = 0
  Source counts = 162104.0 +/- 433.2
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Tue Jun  5 00:16:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 00:16:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 00:16:01 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 00:16:01 2012] Source does appear to be extended
[Tue Jun  5 00:16:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 06:39:48 2012] Counts = 162104.000000, rescaling region sizes by 3.000000
[Tue Jun  5 06:39:48 2012] XMMSAS src. selection expression = ellipse(24160.062600, 24988.573000, 1217.611775, 1217.611775, 0.000000, X, Y)
[Tue Jun  5 06:39:48 2012] Writing source region out to fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun  5 06:39:48 2012] Extracting stamp from image fullrun_mos1_xmm0552170301_pi300-10000_cl_sm2.00.img.gz, (208, 218) - (348, 358)
[Tue Jun  5 06:39:48 2012] XMMSAS bgd. selection expression = annulus(24160.062600, 24988.573000, 6088.058877, 12176.117754, X, Y) && !ellipse(27497.937600, 28518.941600, 348.526410, 348.526410, 0.000000, X, Y) && !ellipse(19561.660553, 35799.190491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19260.266937, 34490.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.787582, 14596.968170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.307739, 30306.718109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13973.572601, 30584.452759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11960.259903, 33166.843109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22371.780731, 23722.412720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17577.289001, 18419.608994, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22919.042384, 28001.129800, 368.782411, 368.782411, 0.000000, X, Y) && !ellipse(22470.714000, 26070.606400, 1274.896037, 1274.896037, 0.000000, X, Y) && !ellipse(26006.696381, 26140.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17260.547989, 13174.788452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23113.322449, 23320.786438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23113.864075, 15688.826401, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(15787.185944, 37369.114624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22178.418930, 25422.385498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29822.366425, 20623.054977, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  5 06:39:48 2012] Writing fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1.gif
[Tue Jun  5 06:40:15 2012] Mean detx,y = (146.43, -126.20) 
[Tue Jun  5 06:40:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 06:46:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 06:46:12 2012] Setting source spectrum file to fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 06:46:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun  5 08:49:22 2012] Updating aperture counts using extracted products
[Tue Jun  5 08:49:22 2012] Error reading totcts from fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 08:49:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 08:49:24 2012] Using photon index=1.80, rate=1.85, arf fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1.arf
[Tue Jun  5 08:49:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 08:49:24 2012] Updating source flux to 1.6e-11
[Tue Jun  5 08:50:32 2012] Reading fit data from xmm0552170301/analysis//spectral/fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun  5 08:50:32 2012] Spectral fit parameter nH value = 6.06582e+20
[Tue Jun  5 08:50:32 2012] Spectral fit parameter PhoIndex value = 1.51651
[Tue Jun  5 08:50:32 2012] Failed to get F(0.3-8.0) from xmm0552170301/analysis//spectral/fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun  5 08:50:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 08:50:32 2012] Using Nh = 6.1e+20, photon index=1.52, rate=1.85, arf fullrun_mos1_xmm0552170301_pi300-10000_pass1_cl_src1.arf
[Tue Jun  5 08:50:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 08:50:32 2012] Updating source flux to 2e-11