[Mon Mar 12 17:39:12 2012] Detection parameters:
  Position = (332.6, 273.2) = 17 19 16.90 -29 4 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20154.4 +/- 168.6
  Background counts = 183.3
  Rate = 0.7 +/- 0.006

[Mon Mar 12 17:39:13 2012] Off-axis axis estimate = 3.08'
[Mon Mar 12 17:45:38 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 17:45:38 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Mon Mar 12 17:45:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Mon Mar 12 17:45:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.97"
[Mon Mar 12 18:27:43 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 12 18:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_src1.csv
[Mon Mar 12 18:27:43 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 12 18:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_src1.csv
[Mon Mar 12 18:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:27:43 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 12 18:27:43 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 12 18:27:43 2012] Fit fullrun_pn_xmm0552002601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 12 19:07:46 2012] Spatial fit model total counts = 13173.700000, observed total counts = 12171.000000
[Mon Mar 12 19:07:46 2012] Offset between fit and detection position for source 1 = 0.093475 pixels
[Mon Mar 12 19:07:46 2012] 13088.000000 total counts/ 3585.500000 bgd. counts: snr = 158.694916
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.093475 pixels
  Position = (332.6, 273.2) = 17 19 16.92 -29 4 8.6
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 9502.5 +/- 114.4
  Background counts = 3585.5
  Rate = 0.4 +/- 0.005
[Mon Mar 12 19:07:46 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:07:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:07:46 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 19:07:46 2012] Source does appear to be extended
[Mon Mar 12 19:07:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:07:46 2012] Source is confused with source 2
[Mon Mar 12 19:08:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 12 19:08:02 2012] Initial guess for spatial extent in simple fitting = 5.44"
[Mon Mar 12 19:08:02 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.978
[Mon Mar 12 19:08:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Mon Mar 12 19:51:23 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 12 19:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_src1.csv
[Mon Mar 12 19:51:23 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 12 19:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_src1.csv
[Mon Mar 12 19:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:51:23 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 12 19:51:23 2012] fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 12 19:51:23 2012] Fit fullrun_pn_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 12 20:44:42 2012] Spatial fit model total counts = 13152.900000, observed total counts = 12171.000000
[Mon Mar 12 20:44:42 2012] Offset between fit and detection position for source 1 = 0.001497 pixels
[Mon Mar 12 20:44:42 2012] 13066.680000 total counts/ 3559.570000 bgd. counts: snr = 159.349150
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001497 pixels
  Position = (332.6, 273.2) = 17 19 16.92 -29 4 8.6
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 9507.1 +/- 114.3
  Background counts = 3559.6
  Rate = 0.4 +/- 0.005
[Mon Mar 12 20:44:42 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 20:44:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 20:44:42 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 20:44:42 2012] Source does appear to be extended
[Mon Mar 12 20:44:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 20:44:56 2012] Counts = 9507.110000, rescaling region sizes by 2.000000
[Mon Mar 12 20:44:56 2012] XMMSAS src. selection expression = ellipse(28887.054000, 23722.941000, 652.936819, 652.936819, 0.000000, X, Y)
[Mon Mar 12 20:44:56 2012] Writing source region out to fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 12 20:44:56 2012] Extracting stamp from image fullrun_pn_xmm0552002601_pi300-10000_cl_sm2.00.img.gz, (295, 236) - (370, 311)
[Mon Mar 12 20:44:56 2012] XMMSAS bgd. selection expression = annulus(28887.054000, 23722.941000, 2176.456063, 4352.912125, X, Y) && !ellipse(28363.093292, 23655.277649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.405487, 24205.200592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.412598, 23981.793152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31630.848260, 28254.266600, 410.520812, 410.520812, 0.000000, X, Y)
[Mon Mar 12 20:44:56 2012] Writing fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1.gif
[Mon Mar 12 20:45:28 2012] Mean detx,y = (-4287.13, -344.16) 
[Mon Mar 12 20:45:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 20:47:04 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 20:47:05 2012] Setting source spectrum file to fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 20:47:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 12 21:49:23 2012] Updating aperture counts using extracted products
[Mon Mar 12 21:49:23 2012] Error reading totcts from fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 21:49:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 21:49:23 2012] Using photon index=1.80, rate=0.422, arf fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 21:49:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 21:49:23 2012] Updating source flux to 1.9e-12
[Mon Mar 12 21:50:37 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Mar 12 21:51:29 2012] Reading fit data from xmm0552002601/analysis//spectral/fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 12 21:51:29 2012] Spectral fit parameter nH value = 5.75598e+21
[Mon Mar 12 21:51:29 2012] Spectral fit parameter PhoIndex value = 2.84429
[Mon Mar 12 21:51:29 2012] Failed to get F(0.3-8.0) from xmm0552002601/analysis//spectral/fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 12 21:51:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 21:51:29 2012] Using Nh = 5.8e+21, photon index=2.84, rate=0.422, arf fullrun_pn_xmm0552002601_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 21:51:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 21:51:29 2012] Updating source flux to 2e-12