[Mon Mar 12 17:40:15 2012] Detection parameters:
  Position = (342.2, 278.8) = 17 19 13.72 -29 3 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.6 +/- 22.7
  Background counts = 184.8
  Rate = 0.003 +/- 0.0006

[Mon Mar 12 17:40:15 2012] Off-axis axis estimate = 3.48'
[Mon Mar 12 18:47:49 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 18:47:49 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Mon Mar 12 18:47:49 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Mon Mar 12 18:47:49 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.17"
[Mon Mar 12 19:07:40 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_src6.ximg exists
[Mon Mar 12 19:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_src6.csv
[Mon Mar 12 19:07:40 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Mar 12 19:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_src6.csv
[Mon Mar 12 19:07:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:07:40 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Mar 12 19:07:40 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Mar 12 19:07:41 2012] Fit fullrun_mos2_xmm0552002601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Mar 12 19:07:52 2012] Source 4 is offset by 7.740335 and 5.573186 pixels which is larger than
2 X fitted extent = 1.621697 x 1.621697, not incorporating fit results
[Mon Mar 12 19:07:52 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:07:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:07:52 2012] Assessing source extent using major
[Mon Mar 12 19:07:52 2012] Source does appear to be extended
[Mon Mar 12 19:07:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 20:07:42 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 20:07:42 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Mon Mar 12 20:07:42 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Mon Mar 12 20:07:42 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.17"
[Mon Mar 12 20:44:36 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_src6.ximg exists
[Mon Mar 12 20:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_src6.csv
[Mon Mar 12 20:44:36 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Mar 12 20:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_src6.csv
[Mon Mar 12 20:44:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 20:44:36 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Mar 12 20:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Mar 12 20:44:36 2012] fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Mar 12 20:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Mar 12 20:44:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552002601_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 20:44:47 2012] Source 4 is offset by 7.740335 and 5.568749 pixels which is larger than
2 X fitted extent = 1.680579 x 1.680579, not incorporating fit results
[Mon Mar 12 20:44:47 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 20:44:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 20:44:47 2012] Assessing source extent using major
[Mon Mar 12 20:44:47 2012] Source does appear to be extended
[Mon Mar 12 20:44:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 21:33:57 2012] XMMSAS src. selection expression = ellipse(29725.471130, 24209.329163, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 21:33:57 2012] Writing source region out to fullrun_mos2_xmm0552002601_pi300-10000_pass1_cl_src4_src.reg
[Mon Mar 12 21:33:57 2012] Extracting stamp from image fullrun_mos2_xmm0552002601_pi300-10000_cl_sm2.00.img.gz, (305, 241) - (380, 316)
[Mon Mar 12 21:33:57 2012] XMMSAS bgd. selection expression = annulus(29725.471130, 24209.329163, 1087.500000, 2175.000000, X, Y) && !ellipse(28885.991800, 23718.074600, 410.460012, 410.460012, 0.000000, X, Y)
[Mon Mar 12 21:33:57 2012] Writing fullrun_mos2_xmm0552002601_pi300-10000_pass1_cl_src4.gif
[Mon Mar 12 21:35:47 2012] Mean detx,y = (5030.48, -310.67) 
[Mon Mar 12 21:35:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 21:36:09 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 21:36:09 2012] Setting source spectrum file to fullrun_mos2_xmm0552002601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 12 21:36:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552002601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Mar 12 21:47:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 12 21:47:22 2012] rmf not generated due to insufficient counts
[Mon Mar 12 21:49:25 2012] Updating aperture counts using extracted products
[Mon Mar 12 21:49:25 2012] Error reading totcts from fullrun_mos2_xmm0552002601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 12 21:49:25 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 21:49:25 2012] Using photon index=1.80, rate=0.00327, arf fullrun_mos2_xmm0552002601_pi300-10000_pass1_cl_src4.arf
[Mon Mar 12 21:49:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 21:49:25 2012] Updating source flux to 4.2e-14
[Mon Mar 12 21:49:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting