[Fri Aug 10 23:03:54 2012] Detection parameters:
  Position = (318.8, 311.8) = 3 56 56.32 -40 41 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 342.9 +/- 24.8
  Background counts = 48.3
  Rate = 0.04 +/- 0.003

[Fri Aug 10 23:03:54 2012] Off-axis axis estimate = 1.76'
[Fri Aug 10 23:08:04 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 23:08:04 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Aug 10 23:08:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Fri Aug 10 23:08:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Fri Aug 10 23:13:57 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 10 23:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 23:13:57 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 10 23:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 23:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 23:13:57 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 10 23:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug 10 23:13:57 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 10 23:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug 10 23:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551950601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 23:24:18 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.112675 pixels away
[Fri Aug 10 23:24:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 23:24:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 23:24:18 2012] Assessing source extent using major
[Fri Aug 10 23:24:18 2012] Source does appear to be extended
[Fri Aug 10 23:24:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 23:24:27 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 23:24:27 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Aug 10 23:24:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Fri Aug 10 23:24:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Fri Aug 10 23:27:05 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 23:27:05 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 23:27:05 2012] Fit fullrun_pn_xmm0551950601_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug 10 23:27:05 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 23:27:05 2012] fullrun_pn_xmm0551950601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 23:27:05 2012] Fit fullrun_pn_xmm0551950601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 10 23:36:39 2012] Spatial fit model total counts = 27.536500, observed total counts = 30.000000
[Fri Aug 10 23:36:39 2012] Offset between fit and detection position for source 1 = 1.575820 pixels
[Fri Aug 10 23:36:39 2012] 32.208100 total counts/ 12.861000 bgd. counts: snr = 5.394839
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.575820 pixels
  Position = (317.3, 312.1) = 3 56 56.91 -40 41 42.4
  Extent = 14.6 (14.6-14.6)", rotation angle = 0
  Source counts = 19.3 +/- 5.7
  Background counts = 12.9
  Rate = 0.6 +/- 0.2
[Fri Aug 10 23:36:39 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 23:36:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 23:36:39 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 23:36:39 2012] Source does appear to be extended
[Fri Aug 10 23:36:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 23:36:48 2012] XMMSAS src. selection expression = ellipse(27553.308400, 27106.333600, 876.654025, 876.654025, 0.000000, X, Y)
[Fri Aug 10 23:36:48 2012] Writing source region out to fullrun_pn_xmm0551950601_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 10 23:36:48 2012] Extracting stamp from image fullrun_pn_xmm0551950601_pi300-10000_cl_sm2.00.img.gz, (267, 262) - (368, 363)
[Fri Aug 10 23:36:48 2012] XMMSAS bgd. selection expression = annulus(27553.308400, 27106.333600, 1461.090042, 2922.180084, X, Y) && !ellipse(27613.862000, 26127.304400, 530.491215, 530.491215, 0.000000, X, Y)
[Fri Aug 10 23:36:48 2012] Writing fullrun_pn_xmm0551950601_pi300-10000_pass1_cl_src1.gif
[Fri Aug 10 23:36:53 2012] Mean detx,y = (114.47, -348.56) 
[Fri Aug 10 23:36:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 23:37:43 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 23:37:44 2012] Setting source spectrum file to fullrun_pn_xmm0551950601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 23:37:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551950601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 10 23:38:10 2012] Not generating rmf since there are only 19 counts
[Fri Aug 10 23:38:10 2012] rmf not generated due to insufficient counts
[Fri Aug 10 23:57:57 2012] Updating aperture counts using extracted products
[Fri Aug 10 23:57:57 2012] Error reading totcts from fullrun_pn_xmm0551950601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 23:57:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 23:57:57 2012] Using photon index=1.80, rate=0.646, arf fullrun_pn_xmm0551950601_pi300-10000_pass1_cl_src1.arf
[Fri Aug 10 23:57:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 23:57:57 2012] Updating source flux to 1.5e-12
[Fri Aug 10 23:58:44 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 10 23:58:45 2012] xmm0551950601/analysis//spectral/fullrun_pn_xmm0551950601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete