[Tue Mar 27 12:11:26 2012] Detection parameters:
  Position = (280.3, 276.7) = 5 24 6.53 -12 9 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.2 +/- 26.8
  Background counts = 19.1
  Rate = 0.04 +/- 0.003

[Tue Mar 27 12:11:27 2012] Off-axis axis estimate = 2.05'
[Tue Mar 27 12:14:32 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 12:14:32 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Mar 27 12:14:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.663
[Tue Mar 27 12:14:32 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.46"
[Tue Mar 27 13:14:44 2012] fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_src2.csv
[Tue Mar 27 13:14:44 2012] fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_src2.csv
[Tue Mar 27 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 13:14:44 2012] fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 27 13:14:44 2012] fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 27 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:07:33 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.119336 pixels away
[Tue Mar 27 14:07:33 2012] Spatial fit model total counts = 748.725000, observed total counts = 729.000000
[Tue Mar 27 14:07:33 2012] Offset between fit and detection position for source 2 = 2.309343 pixels
[Tue Mar 27 14:07:33 2012] Warning, changing simple spatial fit ID from 2 to 16
[Tue Mar 27 14:07:33 2012] 726.376000 total counts/ 442.381000 bgd. counts: snr = 13.502446
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.309343 pixels
  Position = (280.6, 274.4) = 5 24 6.43 -12 9 58.2
  Extent = 9.0 (6.9-11.1)", rotation angle = 0
  Source counts = 284.0 +/- 27.0
  Background counts = 442.4
  Rate = 0.02 +/- 0.002
[Tue Mar 27 14:07:33 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 14:07:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 14:07:33 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 14:07:33 2012] Source does appear to be extended
[Tue Mar 27 14:07:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 14:07:33 2012] Source is confused with source 1
[Tue Mar 27 14:07:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 14:07:52 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Tue Mar 27 14:07:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 7, frac = 0.265
[Tue Mar 27 14:07:52 2012] Skipping simple spatial due to low active detector fraction
[Tue Mar 27 15:47:48 2012] Spatial fit model total counts = 753.425000, observed total counts = 729.000000
[Tue Mar 27 15:47:48 2012] Offset between fit and detection position for source 2 = 0.016184 pixels
[Tue Mar 27 15:47:48 2012] Warning, changing simple spatial fit ID from -1 to 15
[Tue Mar 27 15:47:48 2012] 730.716000 total counts/ 447.385000 bgd. counts: snr = 13.395329
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016184 pixels
  Position = (280.6, 274.4) = 5 24 6.42 -12 9 58.2
  Extent = 8.7 (7.0-10.9)", rotation angle = 0
  Source counts = 283.3 +/- 27.0
  Background counts = 447.4
  Rate = 0.02 +/- 0.002
[Tue Mar 27 15:47:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 15:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 15:47:48 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 15:47:48 2012] Source does appear to be extended
[Tue Mar 27 15:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 15:48:07 2012] XMMSAS src. selection expression = ellipse(24366.840000, 23823.656000, 523.614015, 523.614015, 0.000000, X, Y)
[Tue Mar 27 15:48:07 2012] Writing source region out to fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 27 15:48:07 2012] Extracting stamp from image fullrun_pn_xmm0551950401_pi300-10000_cl_sm2.00.img.gz, (251, 244) - (311, 304)
[Tue Mar 27 15:48:07 2012] XMMSAS bgd. selection expression = annulus(24366.840000, 23823.656000, 872.690025, 1745.380050, X, Y) && !ellipse(24227.112549, 23323.776001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24937.622284, 24384.361969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.537079, 24376.625214, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 15:48:07 2012] Writing fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2.gif
[Tue Mar 27 15:52:21 2012] Mean detx,y = (-27.14, -1113.25) 
[Tue Mar 27 15:52:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 15:53:03 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 15:53:04 2012] Setting source spectrum file to fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 15:53:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 27 17:57:56 2012] Updating aperture counts using extracted products
[Tue Mar 27 17:57:56 2012] Error reading totcts from fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 17:57:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 17:57:57 2012] Using photon index=1.80, rate=0.0217, arf fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 17:57:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 17:57:57 2012] Updating source flux to 8e-14
[Tue Mar 27 17:58:04 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Mar 27 17:58:25 2012] Reading fit data from xmm0551950401/analysis//spectral/fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar 27 17:58:25 2012] Spectral fit parameter nH value = 2.25249e+12
[Tue Mar 27 17:58:25 2012] Spectral fit parameter PhoIndex value = 0.412026
[Tue Mar 27 17:58:25 2012] Failed to get F(0.3-8.0) from xmm0551950401/analysis//spectral/fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 27 17:58:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 17:58:25 2012] Using Nh = 2.3e+12, photon index=0.41, rate=0.0217, arf fullrun_pn_xmm0551950401_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 17:58:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 17:58:25 2012] Updating source flux to 2.1e-13