[Tue Mar 27 12:12:02 2012] Detection parameters:
  Position = (175.7, 193.4) = 5 24 37.56 -12 15 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.2 +/- 10.7
  Background counts = 4.7
  Rate = 0.006 +/- 0.0007

[Tue Mar 27 12:12:02 2012] Off-axis axis estimate = 11.71'
[Tue Mar 27 13:14:44 2012] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 13:14:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 13:14:44 2012] Initial guess for spatial extent in simple fitting = 12.28"
[Tue Mar 27 13:14:44 2012] source mask rpix=2.8, npix_max = 44, mask sum = 38, frac = 0.860
[Tue Mar 27 13:14:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.28"
[Tue Mar 27 13:43:24 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 27 13:43:24 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 27 13:43:24 2012] Fit fullrun_mos1_xmm0551950401_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Mar 27 13:43:24 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 27 13:43:24 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 27 13:43:24 2012] Fit fullrun_mos1_xmm0551950401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 27 14:07:37 2012] Spatial fit model total counts = 110.533000, observed total counts = 101.000000
[Tue Mar 27 14:07:37 2012] Offset between fit and detection position for source 2 = 0.059750 pixels
[Tue Mar 27 14:07:37 2012] 110.514900 total counts/ 46.252400 bgd. counts: snr = 9.449101
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.059750 pixels
  Position = (175.8, 193.4) = 5 24 37.55 -12 15 50.2
  Extent = 5.1 (3.9-6.9)", rotation angle = 0
  Source counts = 64.3 +/- 10.5
  Background counts = 46.3
  Rate = 0.004 +/- 0.0007
[Tue Mar 27 14:07:37 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 14:07:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 14:07:37 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 14:07:37 2012] Source does appear to be extended
[Tue Mar 27 14:07:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 14:55:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 14:55:47 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Tue Mar 27 14:55:47 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.813
[Tue Mar 27 14:55:47 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.06"
[Tue Mar 27 15:19:23 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 27 15:19:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_src3.csv
[Tue Mar 27 15:19:23 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 27 15:19:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_src3.csv
[Tue Mar 27 15:19:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 15:19:23 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 27 15:19:23 2012] fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 27 15:19:23 2012] Fit fullrun_mos1_xmm0551950401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Mar 27 15:47:51 2012] Spatial fit model total counts = 106.584000, observed total counts = 97.000000
[Tue Mar 27 15:47:51 2012] Offset between fit and detection position for source 2 = 0.012282 pixels
[Tue Mar 27 15:47:51 2012] 107.307600 total counts/ 43.625000 bgd. counts: snr = 9.641688
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.012282 pixels
  Position = (175.8, 193.4) = 5 24 37.55 -12 15 50.3
  Extent = 5.0 (3.8-6.8)", rotation angle = 0
  Source counts = 63.7 +/- 10.4
  Background counts = 43.6
  Rate = 0.004 +/- 0.0007
[Tue Mar 27 15:47:51 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 15:47:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 15:47:51 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 15:47:51 2012] Source does appear to be extended
[Tue Mar 27 15:47:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 17:33:25 2012] XMMSAS src. selection expression = ellipse(15242.647800, 16778.672200, 300.769209, 300.769209, 0.000000, X, Y)
[Tue Mar 27 17:33:25 2012] Writing source region out to fullrun_mos1_xmm0551950401_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 27 17:33:25 2012] Extracting stamp from image fullrun_mos1_xmm0551950401_pi300-10000_cl_sm2.00.img.gz, (158, 176) - (193, 211)
[Tue Mar 27 17:33:25 2012] XMMSAS bgd. selection expression = annulus(15242.647800, 16778.672200, 501.282014, 1002.564029, X, Y)
[Tue Mar 27 17:33:25 2012] Writing fullrun_mos1_xmm0551950401_pi300-10000_pass1_cl_src2.gif
[Tue Mar 27 17:38:07 2012] Mean detx,y = (10123.24, 6678.21) 
[Tue Mar 27 17:38:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 17:38:33 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 17:38:33 2012] Setting source spectrum file to fullrun_mos1_xmm0551950401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 17:38:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551950401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 27 17:43:09 2012] Not generating rmf since there are only 63 counts
[Tue Mar 27 17:43:09 2012] rmf not generated due to insufficient counts
[Tue Mar 27 17:57:59 2012] Updating aperture counts using extracted products
[Tue Mar 27 17:57:59 2012] Error reading totcts from fullrun_mos1_xmm0551950401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 17:57:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 17:57:59 2012] Using photon index=1.80, rate=0.00436, arf fullrun_mos1_xmm0551950401_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 17:57:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 17:57:59 2012] Updating source flux to 9.9e-14
[Tue Mar 27 17:58:02 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 27 17:58:03 2012] xmm0551950401/analysis//spectral/fullrun_mos1_xmm0551950401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete