[Wed Jan  4 22:57:25 2012] Detection parameters:
  Position = (292.3, 265.3) = 22 13 58.16 12 40 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 771.4 +/- 187.2
  Background counts = 214.0
  Rate = 0.02 +/- 0.004

[Wed Jan  4 22:57:26 2012] Off-axis axis estimate = 2.44'
[Wed Jan  4 23:07:51 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 23:07:51 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Wed Jan  4 23:07:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Wed Jan  4 23:07:51 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.65"
[Thu Jan  5 02:43:36 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src39.ximg exists
[Thu Jan  5 02:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src39.csv
[Thu Jan  5 02:43:36 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Jan  5 02:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src39.csv
[Thu Jan  5 02:43:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 02:43:37 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Jan  5 02:43:37 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Jan  5 02:43:37 2012] Fit fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Jan  5 03:50:45 2012] Spatial fit model total counts = 1070.630000, observed total counts = 1163.000000
[Thu Jan  5 03:50:45 2012] Offset between fit and detection position for source 41 = 4.569835 pixels
[Thu Jan  5 03:50:45 2012] 1079.671000 total counts/ 477.790000 bgd. counts: snr = 27.535445
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 4.569835 pixels
  Position = (289.7, 261.5) = 22 13 58.92 12 40 11.5
  Extent = 15.0 (14.9-15.3)", rotation angle = 0
  Source counts = 601.9 +/- 32.9
  Background counts = 477.8
  Rate = 0.02 +/- 0.001
[Thu Jan  5 03:50:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 03:50:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 03:50:46 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 03:50:46 2012] Source does appear to be extended
[Thu Jan  5 03:50:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 03:51:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:51:09 2012] Initial guess for spatial extent in simple fitting = 15.02"
[Thu Jan  5 03:51:09 2012] source mask rpix=3.5, npix_max = 62, mask sum = 47, frac = 0.752
[Thu Jan  5 03:51:09 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 15.02"
[Thu Jan  5 09:07:20 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src39.ximg exists
[Thu Jan  5 09:07:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src39.csv
[Thu Jan  5 09:07:20 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Jan  5 09:07:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src39.csv
[Thu Jan  5 09:07:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 09:07:21 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Jan  5 09:07:21 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Jan  5 09:07:21 2012] Fit fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Jan  5 09:42:53 2012] Warning, spatial fit 39 centroid is now closest to src. 42
[Thu Jan  5 09:42:53 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 09:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 09:42:53 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 09:42:53 2012] Source does appear to be extended
[Thu Jan  5 09:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 09:43:14 2012] XMMSAS src. selection expression = ellipse(25159.132800, 22703.554000, 901.080026, 901.080026, 0.000000, X, Y)
[Thu Jan  5 09:43:14 2012] Writing source region out to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src41_src.reg
[Thu Jan  5 09:43:14 2012] Extracting stamp from image fullrun_pn_xmm0551920101_pi300-10000_cl_sm2.00.img.gz, (238, 210) - (342, 313)
[Thu Jan  5 09:43:14 2012] XMMSAS bgd. selection expression = annulus(25159.132800, 22703.554000, 1501.800043, 3003.600086, X, Y) && !ellipse(24169.078000, 25015.794000, 1601.112046, 1601.112046, 0.000000, X, Y) && !ellipse(21808.716000, 24639.284000, 655.569619, 655.569619, 0.000000, X, Y) && !ellipse(22188.836000, 24249.426000, 327.784809, 327.784809, 0.000000, X, Y) && !ellipse(27356.709400, 23641.059800, 573.553617, 400.856812, 320.682046, X, Y) && !ellipse(22212.476000, 23818.764000, 1268.640037, 1268.640037, 0.000000, X, Y) && !ellipse(24391.288940, 23408.572327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23786.416000, 23639.330800, 549.518416, 549.518416, 0.000000, X, Y)
[Thu Jan  5 09:43:14 2012] Writing fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src41.gif
[Thu Jan  5 13:54:38 2012] Mean detx,y = (-1483.74, -1785.34) 
[Thu Jan  5 13:54:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 13:56:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 13:56:05 2012] Setting source spectrum file to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jan  5 13:56:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Fri Jan  6 00:06:08 2012] Updating aperture counts using extracted products
[Fri Jan  6 00:06:08 2012] Error reading totcts from fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jan  6 00:06:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:06:11 2012] Using photon index=1.80, rate=0.0208, arf fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src41.arf
[Fri Jan  6 00:06:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:06:11 2012] Updating source flux to 6.8e-14