[Wed Jan  4 22:57:24 2012] Detection parameters:
  Position = (336.0, 407.0) = 22 13 45.17 12 50 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 764.1 +/- 40.5
  Background counts = 171.5
  Rate = 0.02 +/- 0.0009

[Wed Jan  4 22:57:26 2012] Off-axis axis estimate = 8.33'
[Wed Jan  4 23:07:51 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 23:07:51 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Wed Jan  4 23:07:51 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Wed Jan  4 23:07:51 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.59"
[Thu Jan  5 02:43:35 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jan  5 02:43:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src11.csv
[Thu Jan  5 02:43:35 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jan  5 02:43:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src11.csv
[Thu Jan  5 02:43:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 02:43:36 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jan  5 02:43:36 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jan  5 02:43:36 2012] Fit fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jan  5 03:50:45 2012] Spatial fit model total counts = 3783.090000, observed total counts = 3790.000000
[Thu Jan  5 03:50:45 2012] Offset between fit and detection position for source 11 = 1.636721 pixels
[Thu Jan  5 03:50:45 2012] Warning, changing simple spatial fit ID from 11 to 9
[Thu Jan  5 03:50:45 2012] 3973.440000 total counts/ 2099.910000 bgd. counts: snr = 40.884652
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.636721 pixels
  Position = (334.7, 405.9) = 22 13 45.55 12 50 39.6
  Extent = 21.6 (21.6-21.6)", rotation angle = 0
  Source counts = 1873.5 +/- 63.0
  Background counts = 2099.9
  Rate = 0.06 +/- 0.002
[Thu Jan  5 03:50:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 03:50:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 03:50:46 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 03:50:46 2012] Source does appear to be extended
[Thu Jan  5 03:50:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 03:50:46 2012] Source is confused with source 5
[Thu Jan  5 03:51:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:51:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 03:51:09 2012] Initial guess for spatial extent in simple fitting = 21.58"
[Thu Jan  5 03:51:09 2012] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.015
[Thu Jan  5 03:51:09 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 21.58"
[Thu Jan  5 09:07:19 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jan  5 09:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src11.csv
[Thu Jan  5 09:07:19 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jan  5 09:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src11.csv
[Thu Jan  5 09:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 09:07:21 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jan  5 09:07:21 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jan  5 09:07:21 2012] Fit fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jan  5 09:42:53 2012] Warning, spatial fit 11 centroid is now closest to src. 14
[Thu Jan  5 09:42:53 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 09:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 09:42:53 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 09:42:53 2012] Source does appear to be extended
[Thu Jan  5 09:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 09:43:12 2012] Counts = 1873.530000, rescaling region sizes by 2.000000
[Thu Jan  5 09:43:12 2012] XMMSAS src. selection expression = ellipse(29072.960000, 35266.356000, 2589.336075, 2589.336075, 0.000000, X, Y)
[Thu Jan  5 09:43:12 2012] Writing source region out to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jan  5 09:43:12 2012] Extracting stamp from image fullrun_pn_xmm0551920101_pi300-10000_cl_sm2.00.img.gz, (186, 257) - (484, 555)
[Thu Jan  5 09:43:12 2012] XMMSAS bgd. selection expression = annulus(29072.960000, 35266.356000, 8631.120248, 17262.240497, X, Y) && !ellipse(24169.078000, 25015.794000, 1601.112046, 1601.112046, 0.000000, X, Y) && !ellipse(26754.286660, 28704.244000, 412.161612, 412.161612, 0.000000, X, Y) && !ellipse(30318.102000, 37777.314000, 1810.008052, 1810.008052, 0.000000, X, Y) && !ellipse(19548.658875, 37624.308075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.978000, 36772.084000, 1386.648040, 1386.648040, 0.000000, X, Y) && !ellipse(29900.240600, 36896.216800, 1917.096055, 394.191211, 116.133464, X, Y) && !ellipse(30130.641876, 37355.826202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16230.182892, 36403.130005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29293.430000, 35765.690000, 1700.600049, 1700.600049, 0.000000, X, Y) && !ellipse(30640.649109, 35794.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28796.348000, 34594.494000, 1107.440032, 1107.440032, 0.000000, X, Y) && !ellipse(28657.445023, 34290.644532, 1592.568046, 393.671069, 296.170843, X, Y) && !ellipse(28501.530000, 34028.188000, 1276.512037, 1276.512037, 0.000000, X, Y) && !ellipse(26830.618220, 33557.291200, 441.520013, 441.520013, 0.000000, X, Y) && !ellipse(28203.484000, 33338.392000, 1449.440042, 1449.440042, 0.000000, X, Y) && !ellipse(25198.635559, 33014.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18222.569977, 32930.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27944.552000, 32757.410000, 1437.472041, 1437.472041, 0.000000, X, Y) && !ellipse(27709.087891, 32313.845917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27403.008602, 31715.733421, 1382.904040, 319.869280, 116.715712, X, Y) && !ellipse(27115.585297, 31093.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16605.446060, 31276.764923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24992.009000, 30703.758400, 382.951211, 382.951211, 0.000000, X, Y) && !ellipse(26839.908000, 30615.506000, 1379.552040, 1379.552040, 0.000000, X, Y) && !ellipse(26685.290060, 30204.550155, 1382.904040, 353.203717, 116.691795, X, Y) && !ellipse(26440.196289, 29697.694214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26237.132600, 29350.418000, 1259.376036, 1259.376036, 0.000000, X, Y) && !ellipse(28437.789886, 28875.715729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20652.965210, 28369.773346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25838.390800, 28480.526200, 1146.224033, 325.782409, 116.784000, X, Y) && !ellipse(25509.566000, 27989.864000, 1472.008042, 1472.008042, 0.000000, X, Y) && !ellipse(16975.500061, 27094.894653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25223.798000, 27358.588000, 1474.928042, 1474.928042, 0.000000, X, Y) && !ellipse(21808.716000, 24639.284000, 655.569619, 655.569619, 0.000000, X, Y) && !ellipse(22188.836000, 24249.426000, 327.784809, 327.784809, 0.000000, X, Y) && !ellipse(27356.709400, 23641.059800, 573.553617, 400.856812, 320.682046, X, Y) && !ellipse(22212.476000, 23818.764000, 1268.640037, 1268.640037, 0.000000, X, Y) && !ellipse(32580.741200, 23401.867000, 648.214419, 648.214419, 0.000000, X, Y) && !ellipse(25159.132800, 22703.554000, 1201.440035, 1201.440035, 0.000000, X, Y) && !ellipse(24391.288940, 23408.572327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23786.416000, 23639.330800, 549.518416, 549.518416, 0.000000, X, Y) && !ellipse(30703.445862, 17148.572128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41139.874000, 18857.274000, 2153.439536, 2153.439536, 0.000000, X, Y)
[Thu Jan  5 09:43:12 2012] Writing fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src11.gif
[Thu Jan  5 10:51:56 2012] Mean detx,y = (175.52, 11258.03) 
[Thu Jan  5 10:52:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 11:04:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 11:04:45 2012] Setting source spectrum file to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jan  5 11:04:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jan  6 00:06:06 2012] Updating aperture counts using extracted products
[Fri Jan  6 00:06:06 2012] Error reading totcts from fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jan  6 00:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:06:09 2012] Using photon index=1.80, rate=0.0648, arf fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src11.arf
[Fri Jan  6 00:06:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:06:09 2012] Updating source flux to 2.6e-13
[Fri Jan  6 00:08:02 2012] Flag c found in src. 11 procflags, skipping spectral fitting