[Wed Jan  4 22:57:24 2012] Detection parameters:
  Position = (278.4, 288.1) = 22 14 2.31 12 42 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340282.2 +/- 652.1
  Background counts = 231.5
  Rate = 9 +/- 0.02

[Wed Jan  4 22:57:26 2012] Off-axis axis estimate = 1.64'
[Wed Jan  4 23:07:51 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 23:07:51 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Jan  4 23:07:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Wed Jan  4 23:07:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu Jan  5 02:43:35 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan  5 02:43:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 02:43:35 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan  5 02:43:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 02:43:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 02:43:36 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan  5 02:43:36 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan  5 02:43:36 2012] Fit fullrun_pn_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan  5 03:50:45 2012] Spatial fit model total counts = 224004.000000, observed total counts = 234600.000000
[Thu Jan  5 03:50:45 2012] Offset between fit and detection position for source 1 = 0.043815 pixels
[Thu Jan  5 03:50:45 2012] 223973.000000 total counts/ 25600.000000 bgd. counts: snr = 1239.831250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.043815 pixels
  Position = (278.4, 288.1) = 22 14 2.31 12 42 7.1
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 198373.0 +/- 473.3
  Background counts = 25600.0
  Rate = 7 +/- 0.02
[Thu Jan  5 03:50:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 03:50:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 03:50:46 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 03:50:46 2012] Source does appear to be extended
[Thu Jan  5 03:50:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 03:51:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:51:09 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Thu Jan  5 03:51:09 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967
[Thu Jan  5 03:51:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.67"
[Thu Jan  5 09:07:19 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan  5 09:07:19 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan  5 09:07:19 2012] Fit fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jan  5 09:07:20 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan  5 09:07:20 2012] fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan  5 09:07:20 2012] Fit fullrun_pn_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan  5 09:42:53 2012] Spatial fit model total counts = 223983.000000, observed total counts = 234600.000000
[Thu Jan  5 09:42:53 2012] Offset between fit and detection position for source 1 = 0.000108 pixels
[Thu Jan  5 09:42:53 2012] 223955.000000 total counts/ 25600.000000 bgd. counts: snr = 1239.718750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000108 pixels
  Position = (278.4, 288.1) = 22 14 2.31 12 42 7.1
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 198355.0 +/- 473.2
  Background counts = 25600.0
  Rate = 7 +/- 0.02
[Thu Jan  5 09:42:53 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 09:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 09:42:53 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 09:42:53 2012] Source does appear to be extended
[Thu Jan  5 09:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 09:43:11 2012] Counts = 198355.000000, rescaling region sizes by 3.000000
[Thu Jan  5 09:43:11 2012] XMMSAS src. selection expression = ellipse(24169.078000, 25015.794000, 1200.834035, 1200.834035, 0.000000, X, Y)
[Thu Jan  5 09:43:11 2012] Writing source region out to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jan  5 09:43:11 2012] Extracting stamp from image fullrun_pn_xmm0551920101_pi300-10000_cl_sm2.00.img.gz, (209, 219) - (347, 357)
[Thu Jan  5 09:43:11 2012] XMMSAS bgd. selection expression = annulus(24169.078000, 25015.794000, 6004.170173, 12008.340346, X, Y) && !ellipse(26754.286660, 28704.244000, 412.161612, 412.161612, 0.000000, X, Y) && !ellipse(30318.102000, 37777.314000, 1810.008052, 1810.008052, 0.000000, X, Y) && !ellipse(19548.658875, 37624.308075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.978000, 36772.084000, 1386.648040, 1386.648040, 0.000000, X, Y) && !ellipse(29900.240600, 36896.216800, 1917.096055, 394.191211, 116.133464, X, Y) && !ellipse(30130.641876, 37355.826202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16230.182892, 36403.130005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29293.430000, 35765.690000, 1700.600049, 1700.600049, 0.000000, X, Y) && !ellipse(30640.649109, 35794.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.960000, 35266.356000, 1726.224050, 1726.224050, 0.000000, X, Y) && !ellipse(28796.348000, 34594.494000, 1107.440032, 1107.440032, 0.000000, X, Y) && !ellipse(28657.445023, 34290.644532, 1592.568046, 393.671069, 296.170843, X, Y) && !ellipse(28501.530000, 34028.188000, 1276.512037, 1276.512037, 0.000000, X, Y) && !ellipse(26830.618220, 33557.291200, 441.520013, 441.520013, 0.000000, X, Y) && !ellipse(28203.484000, 33338.392000, 1449.440042, 1449.440042, 0.000000, X, Y) && !ellipse(25198.635559, 33014.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18222.569977, 32930.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27944.552000, 32757.410000, 1437.472041, 1437.472041, 0.000000, X, Y) && !ellipse(27709.087891, 32313.845917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27403.008602, 31715.733421, 1382.904040, 319.869280, 116.715712, X, Y) && !ellipse(27115.585297, 31093.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16605.446060, 31276.764923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24992.009000, 30703.758400, 382.951211, 382.951211, 0.000000, X, Y) && !ellipse(26839.908000, 30615.506000, 1379.552040, 1379.552040, 0.000000, X, Y) && !ellipse(26685.290060, 30204.550155, 1382.904040, 353.203717, 116.691795, X, Y) && !ellipse(26440.196289, 29697.694214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26237.132600, 29350.418000, 1259.376036, 1259.376036, 0.000000, X, Y) && !ellipse(28437.789886, 28875.715729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20652.965210, 28369.773346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25838.390800, 28480.526200, 1146.224033, 325.782409, 116.784000, X, Y) && !ellipse(25509.566000, 27989.864000, 1472.008042, 1472.008042, 0.000000, X, Y) && !ellipse(16975.500061, 27094.894653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25223.798000, 27358.588000, 1474.928042, 1474.928042, 0.000000, X, Y) && !ellipse(21808.716000, 24639.284000, 655.569619, 655.569619, 0.000000, X, Y) && !ellipse(22188.836000, 24249.426000, 327.784809, 327.784809, 0.000000, X, Y) && !ellipse(27356.709400, 23641.059800, 573.553617, 400.856812, 320.682046, X, Y) && !ellipse(22212.476000, 23818.764000, 1268.640037, 1268.640037, 0.000000, X, Y) && !ellipse(32580.741200, 23401.867000, 648.214419, 648.214419, 0.000000, X, Y) && !ellipse(25159.132800, 22703.554000, 1201.440035, 1201.440035, 0.000000, X, Y) && !ellipse(24391.288940, 23408.572327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23786.416000, 23639.330800, 549.518416, 549.518416, 0.000000, X, Y) && !ellipse(30703.445862, 17148.572128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25078.970734, 17018.341614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36576.981323, 16411.389969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18376.629400, 15580.049000, 567.530416, 567.530416, 0.000000, X, Y)
[Thu Jan  5 09:43:11 2012] Writing fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1.gif
[Thu Jan  5 09:44:15 2012] Mean detx,y = (125.57, -88.10) 
[Thu Jan  5 09:44:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 09:50:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 09:50:59 2012] Setting source spectrum file to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jan  5 09:50:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan  6 00:06:05 2012] Updating aperture counts using extracted products
[Fri Jan  6 00:06:05 2012] Error reading totcts from fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 00:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:06:09 2012] Using photon index=1.80, rate=6.86, arf fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 00:06:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:06:09 2012] Updating source flux to 1.6e-11
[Fri Jan  6 00:18:17 2012] Reading fit data from xmm0551920101/analysis//spectral/fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jan  6 00:18:17 2012] Spectral fit parameter nH value = 8.19511e+20
[Fri Jan  6 00:18:17 2012] Spectral fit parameter PhoIndex value = 1.61811
[Fri Jan  6 00:18:17 2012] Failed to get F(0.3-8.0) from xmm0551920101/analysis//spectral/fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 00:18:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:18:17 2012] Using Nh = 8.2e+20, photon index=1.62, rate=6.86, arf fullrun_pn_xmm0551920101_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 00:18:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:18:17 2012] Updating source flux to 2.2e-11