[Wed Jan  4 22:58:28 2012] Detection parameters:
  Position = (278.6, 288.0) = 22 14 2.24 12 42 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154298.2 +/- 461.4
  Background counts = 97.4
  Rate = 3 +/- 0.01

[Wed Jan  4 22:58:28 2012] Off-axis axis estimate = 1.63'
[Thu Jan  5 03:04:11 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 03:04:11 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Jan  5 03:04:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Thu Jan  5 03:04:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Thu Jan  5 03:50:28 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan  5 03:50:28 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan  5 03:50:28 2012] Fit fullrun_mos2_xmm0551920101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Jan  5 03:50:29 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan  5 03:50:29 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan  5 03:50:29 2012] Fit fullrun_mos2_xmm0551920101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan  5 03:50:54 2012] Spatial fit model total counts = 128705.000000, observed total counts = 129420.000000
[Thu Jan  5 03:50:54 2012] Offset between fit and detection position for source 2 = 0.056560 pixels
[Thu Jan  5 03:50:54 2012] 129252.000000 total counts/ 25600.000000 bgd. counts: snr = 647.825000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.056560 pixels
  Position = (278.5, 288.0) = 22 14 2.26 12 42 6.9
  Extent = 5.5 (5.5-5.5)", rotation angle = 0
  Source counts = 103652.0 +/- 359.5
  Background counts = 25600.0
  Rate = 2 +/- 0.008
[Thu Jan  5 03:50:54 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 03:50:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 03:50:54 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 03:50:54 2012] Source does appear to be extended
[Thu Jan  5 03:50:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 09:13:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 09:13:21 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Thu Jan  5 09:13:21 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.963
[Thu Jan  5 09:13:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.50"
[Thu Jan  5 09:42:35 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan  5 09:42:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 09:42:35 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan  5 09:42:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 09:42:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 09:42:35 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan  5 09:42:35 2012] fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan  5 09:42:35 2012] Fit fullrun_mos2_xmm0551920101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan  5 09:42:57 2012] Spatial fit model total counts = 128603.000000, observed total counts = 129420.000000
[Thu Jan  5 09:42:57 2012] Offset between fit and detection position for source 2 = 0.000118 pixels
[Thu Jan  5 09:42:57 2012] 129149.000000 total counts/ 25600.000000 bgd. counts: snr = 647.181250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000118 pixels
  Position = (278.5, 288.0) = 22 14 2.26 12 42 6.9
  Extent = 5.5 (5.5-5.5)", rotation angle = 0
  Source counts = 103549.0 +/- 359.4
  Background counts = 25600.0
  Rate = 2 +/- 0.008
[Thu Jan  5 09:42:57 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 09:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 09:42:57 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 09:42:57 2012] Source does appear to be extended
[Thu Jan  5 09:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 23:37:02 2012] Counts = 103549.000000, rescaling region sizes by 3.000000
[Thu Jan  5 23:37:02 2012] XMMSAS src. selection expression = ellipse(24183.811600, 25011.069400, 991.083629, 991.083629, 0.000000, X, Y)
[Thu Jan  5 23:37:02 2012] Writing source region out to fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jan  5 23:37:02 2012] Extracting stamp from image fullrun_mos2_xmm0551920101_pi300-10000_cl_sm2.00.img.gz, (222, 231) - (335, 345)
[Thu Jan  5 23:37:02 2012] XMMSAS bgd. selection expression = annulus(24183.811600, 25011.069400, 4955.418143, 9910.836285, X, Y) && !ellipse(26834.741608, 33550.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23746.119476, 25885.812897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23345.486176, 25529.842499, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 23:37:02 2012] Writing fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2.gif
[Thu Jan  5 23:37:29 2012] Mean detx,y = (50.13, -51.37) 
[Thu Jan  5 23:37:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 23:41:30 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 23:41:30 2012] Setting source spectrum file to fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jan  5 23:41:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jan  6 00:06:12 2012] Updating aperture counts using extracted products
[Fri Jan  6 00:06:12 2012] Error reading totcts from fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jan  6 00:06:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:06:13 2012] Using photon index=1.80, rate=2.36, arf fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2.arf
[Fri Jan  6 00:06:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:06:13 2012] Updating source flux to 2.4e-11
[Fri Jan  6 00:08:02 2012] Reading fit data from xmm0551920101/analysis//spectral/fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jan  6 00:08:02 2012] Spectral fit parameter nH value = 9.35658e+20
[Fri Jan  6 00:08:02 2012] Spectral fit parameter PhoIndex value = 1.63118
[Fri Jan  6 00:08:02 2012] Failed to get F(0.3-8.0) from xmm0551920101/analysis//spectral/fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 00:08:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:08:02 2012] Using Nh = 9.4e+20, photon index=1.63, rate=2.36, arf fullrun_mos2_xmm0551920101_pi300-10000_pass1_cl_src2.arf
[Fri Jan  6 00:08:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:08:02 2012] Updating source flux to 2.8e-11