[Wed Aug  8 10:57:05 2012] Detection parameters:
  Position = (203.0, 171.3) = 12 31 47.17 12 38 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 632.6 +/- 35.2
  Background counts = 141.9
  Rate = 0.03 +/- 0.002

[Wed Aug  8 10:57:05 2012] Off-axis axis estimate = 11.53'
[Wed Aug  8 11:02:15 2012] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 11:02:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 11:02:15 2012] Initial guess for spatial extent in simple fitting = 12.19"
[Wed Aug  8 11:02:15 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.963
[Wed Aug  8 11:02:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.19"
[Wed Aug  8 11:21:14 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 11:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 11:21:14 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 11:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 11:21:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 11:21:14 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 11:21:14 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 11:21:14 2012] Fit fullrun_pn_xmm0551871301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 11:42:50 2012] Spatial fit model total counts = 195.685000, observed total counts = 196.000000
[Wed Aug  8 11:42:50 2012] Offset between fit and detection position for source 1 = 0.450871 pixels
[Wed Aug  8 11:42:50 2012] 196.277600 total counts/ 147.788000 bgd. counts: snr = 3.988678
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.450871 pixels
  Position = (203.4, 171.2) = 12 31 47.04 12 38 34.0
  Extent = 5.9 (4.4-8.0)", rotation angle = 0
  Source counts = 48.5 +/- 14.0
  Background counts = 147.8
  Rate = 0.04 +/- 0.01
[Wed Aug  8 11:42:50 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 11:42:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 11:42:50 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 11:42:50 2012] Source does appear to be extended
[Wed Aug  8 11:42:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 11:43:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 11:43:02 2012] Initial guess for spatial extent in simple fitting = 5.94"
[Wed Aug  8 11:43:02 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.863
[Wed Aug  8 11:43:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.94"
[Wed Aug  8 12:00:43 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 12:00:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 12:00:43 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 12:00:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 12:00:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 12:00:43 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 12:00:43 2012] fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 12:00:43 2012] Fit fullrun_pn_xmm0551871301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 12:22:27 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Wed Aug  8 12:22:27 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 12:22:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 12:22:27 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 12:22:27 2012] Source does appear to be extended
[Wed Aug  8 12:22:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 12:22:40 2012] XMMSAS src. selection expression = ellipse(17651.211600, 14846.738000, 356.104810, 356.104810, 0.000000, X, Y)
[Wed Aug  8 12:22:40 2012] Writing source region out to fullrun_pn_xmm0551871301_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 12:22:40 2012] Extracting stamp from image fullrun_pn_xmm0551871301_pi300-10000_cl_sm2.00.img.gz, (183, 151) - (224, 192)
[Wed Aug  8 12:22:40 2012] XMMSAS bgd. selection expression = annulus(17651.211600, 14846.738000, 593.508017, 1187.016034, X, Y)
[Wed Aug  8 12:22:40 2012] Writing fullrun_pn_xmm0551871301_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 12:22:46 2012] Mean detx,y = (11412.58, -4477.56) 
[Wed Aug  8 12:22:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 12:23:11 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 12:23:12 2012] Setting source spectrum file to fullrun_pn_xmm0551871301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 12:23:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551871301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 12:28:05 2012] Not generating rmf since there are only 48 counts
[Wed Aug  8 12:28:05 2012] rmf not generated due to insufficient counts
[Wed Aug  8 12:46:17 2012] Updating aperture counts using extracted products
[Wed Aug  8 12:46:17 2012] Error reading totcts from fullrun_pn_xmm0551871301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 12:46:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 12:46:18 2012] Using photon index=1.80, rate=0.0394, arf fullrun_pn_xmm0551871301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 12:46:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 12:46:18 2012] Updating source flux to 2.2e-13
[Wed Aug  8 12:46:48 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug  8 12:46:49 2012] xmm0551871301/analysis//spectral/fullrun_pn_xmm0551871301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete