[Wed Aug  8 10:58:14 2012] Detection parameters:
  Position = (202.8, 171.3) = 12 31 47.24 12 38 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 445.3 +/- 28.3
  Background counts = 64.5
  Rate = 0.01 +/- 0.001

[Wed Aug  8 10:58:14 2012] Off-axis axis estimate = 11.54'
[Wed Aug  8 11:29:02 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 11:29:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 11:29:02 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Wed Aug  8 11:29:02 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.122
[Wed Aug  8 11:29:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.20"
[Wed Aug  8 11:42:47 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 11:42:47 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 11:42:47 2012] Fit fullrun_mos2_xmm0551871301_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Aug  8 11:42:47 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 11:42:47 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 11:42:47 2012] Fit fullrun_mos2_xmm0551871301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 11:42:54 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.876393 pixels away
[Wed Aug  8 11:42:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 11:42:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 11:42:54 2012] Assessing source extent using major
[Wed Aug  8 11:42:54 2012] Source does appear to be extended
[Wed Aug  8 11:42:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 12:08:01 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:08:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 12:08:01 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Wed Aug  8 12:08:01 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.122
[Wed Aug  8 12:08:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.20"
[Wed Aug  8 12:22:23 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 12:22:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 12:22:23 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 12:22:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 12:22:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 12:22:23 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 12:22:23 2012] fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 12:22:23 2012] Fit fullrun_mos2_xmm0551871301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 12:22:31 2012] Spatial fit model total counts = 1009.000000, observed total counts = 1009.000000
[Wed Aug  8 12:22:31 2012] Offset between fit and detection position for source 1 = 0.100154 pixels
[Wed Aug  8 12:22:31 2012] 1008.348000 total counts/ 744.603000 bgd. counts: snr = 9.665445
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.100154 pixels
  Position = (202.8, 171.4) = 12 31 47.24 12 38 34.6
  Extent = 6.1 (5.3-6.7)", rotation angle = 0
  Source counts = 263.7 +/- 31.8
  Background counts = 744.6
  Rate = 0.01 +/- 0.002
[Wed Aug  8 12:22:31 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 12:22:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 12:22:31 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 12:22:31 2012] Source does appear to be extended
[Wed Aug  8 12:22:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 12:37:35 2012] XMMSAS src. selection expression = ellipse(17593.326800, 14859.707000, 363.444610, 363.444610, 0.000000, X, Y)
[Wed Aug  8 12:37:35 2012] Writing source region out to fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 12:37:35 2012] Extracting stamp from image fullrun_mos2_xmm0551871301_pi300-10000_cl_sm2.00.img.gz, (182, 150) - (224, 192)
[Wed Aug  8 12:37:35 2012] XMMSAS bgd. selection expression = annulus(17593.326800, 14859.707000, 605.741017, 1211.482035, X, Y)
[Wed Aug  8 12:37:35 2012] Writing fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 12:37:41 2012] Mean detx,y = (-11268.09, 4394.79) 
[Wed Aug  8 12:37:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 12:37:58 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 12:37:58 2012] Setting source spectrum file to fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 12:37:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 12:46:19 2012] Updating aperture counts using extracted products
[Wed Aug  8 12:46:19 2012] Error reading totcts from fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 12:46:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 12:46:19 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 12:46:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 12:46:19 2012] Updating source flux to 3.2e-13
[Wed Aug  8 12:46:48 2012] Reading fit data from xmm0551871301/analysis//spectral/fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  8 12:46:48 2012] Spectral fit parameter nH value = 9.95544e+13
[Wed Aug  8 12:46:48 2012] Spectral fit parameter PhoIndex value = 2.13854
[Wed Aug  8 12:46:48 2012] Failed to get F(0.3-8.0) from xmm0551871301/analysis//spectral/fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 12:46:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 12:46:48 2012] Using Nh = 1e+14, photon index=2.14, rate=0.0138, arf fullrun_mos2_xmm0551871301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 12:46:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 12:46:48 2012] Updating source flux to 2.8e-13