[Sat Feb 18 10:33:45 2012] Detection parameters:
  Position = (220.5, 125.0) = 12 30 30.11 12 29 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.5 +/- 18.3
  Background counts = 92.8
  Rate = 0.005 +/- 0.0009

[Sat Feb 18 10:33:47 2012] Off-axis axis estimate = 13.79'
[Sat Feb 18 10:38:05 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 10:38:05 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Sat Feb 18 10:38:05 2012] source mask rpix=3.1, npix_max = 50, mask sum = 27, frac = 0.532
[Sat Feb 18 10:38:05 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.32"
[Sat Feb 18 14:03:54 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src5.ximg exists
[Sat Feb 18 14:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src5.csv
[Sat Feb 18 14:03:54 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Feb 18 14:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src5.csv
[Sat Feb 18 14:03:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 14:03:55 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Feb 18 14:03:55 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Feb 18 14:03:55 2012] Fit fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Feb 18 15:44:34 2012] Spatial fit model total counts = 1283.420000, observed total counts = 1304.000000
[Sat Feb 18 15:44:34 2012] Offset between fit and detection position for source 5 = 5.314697 pixels
[Sat Feb 18 15:44:34 2012] Warning, changing simple spatial fit ID from 5 to 4
[Sat Feb 18 15:44:34 2012] 1218.804000 total counts/ 230.891000 bgd. counts: snr = 65.015244
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.314697 pixels
  Position = (215.5, 126.9) = 12 30 31.58 12 30 0.9
  Extent = 26.5 (26.0-53.0)" x 17.5 (15.8-18.6)", rotation angle = 35 (28-43) degrees
  Source counts = 987.9 +/- 34.9
  Background counts = 230.9
  Rate = 0.1 +/- 0.004
[Sat Feb 18 15:44:34 2012] Spatial fit model total counts = 1146.750000, observed total counts = 1148.000000
[Sat Feb 18 15:44:34 2012] Offset between fit and detection position for source 5 = 1.816990 pixels
[Sat Feb 18 15:44:34 2012] Warning, changing simple spatial fit ID from 4 to 28
[Sat Feb 18 15:44:34 2012] 999.489000 total counts/ 849.338000 bgd. counts: snr = 5.152144
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.816990 pixels
  Position = (216.6, 125.4) = 12 30 31.27 12 29 54.5
  Extent = 9.5 (7.9-12.1)", rotation angle = 0
  Source counts = 150.2 +/- 31.6
  Background counts = 849.3
  Rate = 0.02 +/- 0.004
[Sat Feb 18 15:44:34 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 15:44:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 15:44:34 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 15:44:34 2012] Source does appear to be extended
[Sat Feb 18 15:44:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 15:44:34 2012] Source is confused with source 1
[Sat Feb 18 15:44:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:44:47 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Sat Feb 18 15:44:47 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.835
[Sat Feb 18 15:44:47 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.49"
[Sat Feb 18 20:00:10 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src5.ximg exists
[Sat Feb 18 20:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src5.csv
[Sat Feb 18 20:00:10 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Feb 18 20:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src5.csv
[Sat Feb 18 20:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 20:00:10 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Feb 18 20:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Feb 18 20:00:10 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Feb 18 20:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Feb 18 20:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 21:30:09 2012] Spatial fit model total counts = 1070.020000, observed total counts = 1077.000000
[Sat Feb 18 21:30:09 2012] Offset between fit and detection position for source 5 = 0.801236 pixels
[Sat Feb 18 21:30:09 2012] Warning, changing simple spatial fit ID from 5 to 2
[Sat Feb 18 21:30:09 2012] 801.564000 total counts/ 667.358000 bgd. counts: snr = 5.195083
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.801236 pixels
  Position = (217.3, 125.1) = 12 30 31.05 12 29 53.0
  Extent = 9.6 (8.0-12.2)", rotation angle = 0
  Source counts = 134.2 +/- 28.3
  Background counts = 667.4
  Rate = 0.01 +/- 0.003
[Sat Feb 18 21:30:09 2012] Spatial fit model total counts = 1810.530000, observed total counts = 1979.000000
[Sat Feb 18 21:30:09 2012] Offset between fit and detection position for source 5 = 0.615019 pixels
[Sat Feb 18 21:30:09 2012] Warning, changing simple spatial fit ID from 2 to 4
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.615019 pixels
  Position = (216.7, 125.1) = 12 30 31.24 12 29 53.0
  Extent = 26.5 (25.7-53.0)", rotation angle = 0
  Source counts = 1058.5 +/- 32.5
  Background counts = 0.0
  Rate = 0.1 +/- 0.004
[Sat Feb 18 21:30:09 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 21:30:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 21:30:09 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 21:30:09 2012] Source does appear to be extended
[Sat Feb 18 21:30:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 21:30:28 2012] Counts = 1058.470000, rescaling region sizes by 2.000000
[Sat Feb 18 21:30:28 2012] XMMSAS src. selection expression = ellipse(18802.038000, 10834.480000, 3180.072092, 3180.072092, 0.000000, X, Y)
[Sat Feb 18 21:30:28 2012] Writing source region out to fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5_src.reg
[Sat Feb 18 21:30:28 2012] Extracting stamp from image fullrun_pn_xmm0551870701_pi300-10000_cl_sm2.00.img.gz, (34, 0) - (399, 308)
[Sat Feb 18 21:30:28 2012] XMMSAS bgd. selection expression = annulus(18802.038000, 10834.480000, 10600.240305, 21200.480610, X, Y) && !ellipse(17559.972000, 11528.972000, 2136.368061, 1636.760047, 359.765000, X, Y) && !ellipse(19048.002655, 11332.978699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18930.966309, 19600.797012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18285.357437, 11430.093033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21272.145920, 10827.917786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21742.769400, 10642.974000, 1925.840055, 1925.840055, 0.000000, X, Y) && !ellipse(21271.466232, 10321.163628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30338.002319, 32681.832977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14617.283400, 25211.704200, 326.440809, 326.440809, 0.000000, X, Y) && !ellipse(21774.748160, 23677.134600, 484.116014, 484.116014, 0.000000, X, Y) && !ellipse(27953.594220, 20798.277400, 409.708012, 409.708012, 0.000000, X, Y) && !ellipse(19769.328979, 10529.812424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22044.119583, 12262.084961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17290.634781, 12136.487473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20881.419861, 11868.593689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16614.550000, 12551.634000, 2112.288061, 2112.288061, 0.000000, X, Y) && !ellipse(25262.348640, 11994.634400, 871.272025, 871.272025, 0.000000, X, Y) && !ellipse(19380.223000, 12011.218000, 1148.040033, 1148.040033, 0.000000, X, Y) && !ellipse(18024.569839, 12032.476700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23953.498505, 11811.853058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.714172, 11610.701401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22594.476624, 11541.220612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20927.837738, 11519.847626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19437.184814, 11378.651840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20363.444885, 11091.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18175.261337, 11211.342514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22977.382000, 11187.733600, 2051.200059, 2051.200059, 0.000000, X, Y) && !ellipse(21958.058000, 10746.854000, 2063.040059, 1347.584039, 157.316000, X, Y) && !ellipse(21656.550354, 10994.398743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20353.092000, 10534.173200, 2044.944059, 2044.944059, 0.000000, X, Y)
[Sat Feb 18 21:30:28 2012] Writing fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5.gif
[Sat Feb 18 21:34:00 2012] Mean detx,y = (-12619.99, 11648.88) 
[Sat Feb 18 21:34:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 21:41:45 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 21:41:45 2012] Setting source spectrum file to fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Feb 18 21:41:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Feb 19 01:20:09 2012] Updating aperture counts using extracted products
[Sun Feb 19 01:20:09 2012] Error reading totcts from fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Feb 19 01:20:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 01:20:09 2012] Using photon index=1.80, rate=0.117, arf fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5.arf
[Sun Feb 19 01:20:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 01:20:10 2012] Updating source flux to 1.4e-12
[Sun Feb 19 01:22:29 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Sun Feb 19 01:24:45 2012] Reading fit data from xmm0551870701/analysis//spectral/fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5_pl.csv
[Sun Feb 19 01:24:45 2012] Spectral fit parameter nH value = 1.49044e+21
[Sun Feb 19 01:24:45 2012] Spectral fit parameter PhoIndex value = 2.64312
[Sun Feb 19 01:24:45 2012] Failed to get F(0.3-8.0) from xmm0551870701/analysis//spectral/fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sun Feb 19 01:24:45 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 01:24:45 2012] Using Nh = 1.5e+21, photon index=2.64, rate=0.117, arf fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src5.arf
[Sun Feb 19 01:24:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 01:24:45 2012] Updating source flux to 1.2e-12