[Sat Feb 18 10:33:46 2012] Detection parameters:
  Position = (253.9, 141.5) = 12 30 20.17 12 31 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.9 +/- 21.9
  Background counts = 132.0
  Rate = 0.005 +/- 0.001

[Sat Feb 18 10:33:47 2012] Off-axis axis estimate = 11.83'
[Sat Feb 18 10:38:05 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 10:38:05 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Sat Feb 18 10:38:05 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Sat Feb 18 10:38:05 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.34"
[Sat Feb 18 14:03:55 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src17.ximg exists
[Sat Feb 18 14:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src17.csv
[Sat Feb 18 14:03:55 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Feb 18 14:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src17.csv
[Sat Feb 18 14:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 14:03:56 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Feb 18 14:03:56 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Feb 18 14:03:56 2012] Fit fullrun_pn_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Feb 18 15:44:34 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 15.991401 pixels away
[Sat Feb 18 15:44:34 2012] Source 17 is offset by 6.001949 and -3.562817 pixels which is larger than
2 X fitted extent = 1.445476 x 1.445476, not incorporating fit results
[Sat Feb 18 15:44:34 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 15:44:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 15:44:34 2012] Assessing source extent using major
[Sat Feb 18 15:44:34 2012] Source does appear to be extended
[Sat Feb 18 15:44:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 15:44:47 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:44:47 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Sat Feb 18 15:44:47 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Sat Feb 18 15:44:47 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.34"
[Sat Feb 18 20:00:10 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src16.ximg exists
[Sat Feb 18 20:00:10 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Feb 18 20:00:10 2012] Fit fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_src16 appears to have run properly
[Sat Feb 18 20:00:11 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Feb 18 20:00:11 2012] fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Feb 18 20:00:11 2012] Fit fullrun_pn_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Feb 18 21:30:09 2012] Warning, spatial fit 16 centroid is now closest to src. 31
[Sat Feb 18 21:30:09 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 21:30:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 21:30:09 2012] Assessing source extent using major
[Sat Feb 18 21:30:09 2012] Source does appear to be extended
[Sat Feb 18 21:30:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 21:30:09 2012] Source is confused with source 31
[Sat Feb 18 21:30:09 2012] Source is confused with source 32
[Sat Feb 18 21:30:29 2012] XMMSAS src. selection expression = ellipse(22044.119583, 12262.084961, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 18 21:30:29 2012] Writing source region out to fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src17_src.reg
[Sat Feb 18 21:30:29 2012] Extracting stamp from image fullrun_pn_xmm0551870701_pi300-10000_cl_sm2.00.img.gz, (216, 104) - (291, 179)
[Sat Feb 18 21:30:29 2012] XMMSAS bgd. selection expression = annulus(22044.119583, 12262.084961, 1087.500000, 2175.000000, X, Y) && !ellipse(19048.002655, 11332.978699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18802.038000, 10834.480000, 2120.048061, 2120.048061, 0.000000, X, Y) && !ellipse(21272.145920, 10827.917786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21742.769400, 10642.974000, 1925.840055, 1925.840055, 0.000000, X, Y) && !ellipse(21271.466232, 10321.163628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19769.328979, 10529.812424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20881.419861, 11868.593689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19380.223000, 12011.218000, 1148.040033, 1148.040033, 0.000000, X, Y) && !ellipse(23953.498505, 11811.853058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.714172, 11610.701401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22594.476624, 11541.220612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20927.837738, 11519.847626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19437.184814, 11378.651840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20363.444885, 11091.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22977.382000, 11187.733600, 2051.200059, 2051.200059, 0.000000, X, Y) && !ellipse(21958.058000, 10746.854000, 2063.040059, 1347.584039, 157.316000, X, Y) && !ellipse(21656.550354, 10994.398743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20353.092000, 10534.173200, 2044.944059, 2044.944059, 0.000000, X, Y)
[Sat Feb 18 21:30:29 2012] Writing fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src17.gif
[Sat Feb 18 21:46:31 2012] Mean detx,y = (-9868.64, 12608.53) 
[Sat Feb 18 21:46:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 21:46:48 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 21:46:49 2012] Setting source spectrum file to fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Feb 18 21:46:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Feb 19 00:21:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 19 00:21:38 2012] rmf not generated due to insufficient counts
[Sun Feb 19 01:20:09 2012] Updating aperture counts using extracted products
[Sun Feb 19 01:20:09 2012] Error reading totcts from fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Feb 19 01:20:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 01:20:10 2012] Using photon index=1.80, rate=0.00496, arf fullrun_pn_xmm0551870701_pi300-10000_pass1_cl_src17.arf
[Sun Feb 19 01:20:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 01:20:10 2012] Updating source flux to 3.7e-14
[Sun Feb 19 01:22:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting