[Sat Feb 18 10:34:35 2012] Detection parameters:
  Position = (228.6, 142.5) = 12 30 27.68 12 31 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.1 +/- 22.3
  Background counts = 140.9
  Rate = 0.004 +/- 0.0009

[Sat Feb 18 10:34:36 2012] Off-axis axis estimate = 12.38'
[Sat Feb 18 14:11:07 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 14:11:07 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Sat Feb 18 14:11:07 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Sat Feb 18 14:11:07 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.62"
[Sat Feb 18 15:44:25 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_src15.ximg exists
[Sat Feb 18 15:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_src15.csv
[Sat Feb 18 15:44:25 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Feb 18 15:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_src15.csv
[Sat Feb 18 15:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 15:44:25 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Feb 18 15:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Feb 18 15:44:25 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Feb 18 15:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Feb 18 15:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551870701_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 15:44:39 2012] Spatial fit model total counts = 723.466000, observed total counts = 825.000000
[Sat Feb 18 15:44:39 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Feb 18 15:44:39 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 15:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 15:44:39 2012] Assessing source extent using major
[Sat Feb 18 15:44:39 2012] Source does appear to be extended
[Sat Feb 18 15:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 20:07:12 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 20:07:12 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Sat Feb 18 20:07:12 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Sat Feb 18 20:07:12 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.62"
[Sat Feb 18 21:29:56 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass1_src12.ximg exists
[Sat Feb 18 21:29:56 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Feb 18 21:29:56 2012] Fit fullrun_mos2_xmm0551870701_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Feb 18 21:29:56 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 18 21:29:56 2012] fullrun_mos2_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 18 21:29:56 2012] Fit fullrun_mos2_xmm0551870701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Feb 18 21:30:15 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.308878 pixels away
[Sat Feb 18 21:30:15 2012] Source 6 is offset by -5.750360 and -5.077200 pixels which is larger than
2 X fitted extent = 1.451444 x 1.451444, not incorporating fit results
[Sat Feb 18 21:30:15 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 21:30:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 21:30:15 2012] Assessing source extent using major
[Sat Feb 18 21:30:15 2012] Source does appear to be extended
[Sat Feb 18 21:30:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 00:46:43 2012] XMMSAS src. selection expression = ellipse(19843.012680, 12351.989563, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 19 00:46:43 2012] Writing source region out to fullrun_mos2_xmm0551870701_pi300-10000_pass1_cl_src6_src.reg
[Sun Feb 19 00:46:43 2012] Extracting stamp from image fullrun_mos2_xmm0551870701_pi300-10000_cl_sm2.00.img.gz, (191, 105) - (266, 180)
[Sun Feb 19 00:46:43 2012] XMMSAS bgd. selection expression = annulus(19843.012680, 12351.989563, 1087.500000, 2175.000000, X, Y) && !ellipse(22794.628000, 11470.970000, 1994.408057, 1994.408057, 0.000000, X, Y) && !ellipse(22527.973450, 11829.568741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21374.854401, 11747.739410, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 00:46:43 2012] Writing fullrun_mos2_xmm0551870701_pi300-10000_pass1_cl_src6.gif
[Sun Feb 19 00:50:23 2012] Mean detx,y = (11799.60, -11837.44) 
[Sun Feb 19 00:50:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 00:50:39 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 00:50:39 2012] Setting source spectrum file to fullrun_mos2_xmm0551870701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 19 00:50:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551870701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Feb 19 01:10:44 2012] Not generating rmf since there are only 95 counts
[Sun Feb 19 01:10:44 2012] rmf not generated due to insufficient counts
[Sun Feb 19 01:20:11 2012] Updating aperture counts using extracted products
[Sun Feb 19 01:20:11 2012] Error reading totcts from fullrun_mos2_xmm0551870701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 19 01:20:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 01:20:11 2012] Using photon index=1.80, rate=0.00371, arf fullrun_mos2_xmm0551870701_pi300-10000_pass1_cl_src6.arf
[Sun Feb 19 01:20:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 01:20:11 2012] Updating source flux to 1.2e-13
[Sun Feb 19 01:20:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting