[Fri Dec  2 22:22:06 2011] Detection parameters:
  Position = (279.8, 136.7) = 12 31 28.31 11 50 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.2 +/- 24.0
  Background counts = 112.5
  Rate = 0.007 +/- 0.0007

[Fri Dec  2 22:22:06 2011] Off-axis axis estimate = 11.80'
[Fri Dec  2 22:27:13 2011] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 22:27:13 2011] Initial guess for spatial extent in simple fitting = 12.33"
[Fri Dec  2 22:27:13 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Fri Dec  2 22:27:13 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 12.33"
[Fri Dec  2 22:50:01 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_src10.ximg exists
[Fri Dec  2 22:50:01 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_src10.csv
[Fri Dec  2 22:50:01 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Dec  2 22:50:01 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_src10.csv
[Fri Dec  2 22:50:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 22:50:01 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Dec  2 22:50:01 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Dec  2 22:50:01 2011] Fit fullrun_pn_xmm0551870501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Dec  2 23:27:58 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.267303 pixels away
[Fri Dec  2 23:27:58 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 23:27:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 23:27:58 2011] Assessing source extent using major
[Fri Dec  2 23:27:58 2011] Source does appear to be extended
[Fri Dec  2 23:27:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 23:28:10 2011] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 23:28:10 2011] Initial guess for spatial extent in simple fitting = 12.33"
[Fri Dec  2 23:28:10 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Fri Dec  2 23:28:10 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 12.33"
[Fri Dec  2 23:52:43 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_src10.ximg exists
[Fri Dec  2 23:52:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_src10.csv
[Fri Dec  2 23:52:43 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Dec  2 23:52:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_src10.csv
[Fri Dec  2 23:52:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 23:52:44 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Dec  2 23:52:44 2011] fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Dec  2 23:52:44 2011] Fit fullrun_pn_xmm0551870501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Dec  3 00:29:16 2011] Spatial fit model total counts = 1496.890000, observed total counts = 1500.000000
[Sat Dec  3 00:29:16 2011] Offset between fit and detection position for source 12 = 1.396724 pixels
[Sat Dec  3 00:29:16 2011] 1500.952000 total counts/ 1155.850000 bgd. counts: snr = 10.150717
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.396724 pixels
  Position = (280.1, 135.4) = 12 31 28.22 11 50 10.2
  Extent = 12.6 (11.0-14.5)", rotation angle = 0
  Source counts = 345.1 +/- 38.7
  Background counts = 1155.8
  Rate = 0.02 +/- 0.002
[Sat Dec  3 00:29:16 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 00:29:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 00:29:16 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 00:29:16 2011] Source does appear to be extended
[Sat Dec  3 00:29:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 00:29:28 2011] XMMSAS src. selection expression = ellipse(24317.348000, 11728.251200, 753.186022, 753.186022, 0.000000, X, Y)
[Sat Dec  3 00:29:28 2011] Writing source region out to fullrun_pn_xmm0551870501_pi300-10000_pass1_cl_src12_src.reg
[Sat Dec  3 00:29:28 2011] Extracting stamp from image fullrun_pn_xmm0551870501_pi300-10000_cl_sm2.00.img.gz, (237, 92) - (323, 179)
[Sat Dec  3 00:29:28 2011] XMMSAS bgd. selection expression = annulus(24317.348000, 11728.251200, 1255.310036, 2510.620072, X, Y) && !ellipse(23929.709442, 14305.657028, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec  3 00:29:28 2011] Writing fullrun_pn_xmm0551870501_pi300-10000_pass1_cl_src12.gif
[Sat Dec  3 00:47:25 2011] Mean detx,y = (-8263.79, 13759.06) 
[Sat Dec  3 00:47:27 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec  3 00:47:50 2011] Binned source spectrum to 10 counts/bin
[Sat Dec  3 00:47:50 2011] Setting source spectrum file to fullrun_pn_xmm0551870501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Dec  3 00:47:50 2011] Setting bgd. spectrum file to fullrun_pn_xmm0551870501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Dec  3 02:41:12 2011] Updating aperture counts using extracted products
[Sat Dec  3 02:41:12 2011] Error reading totcts from fullrun_pn_xmm0551870501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Dec  3 02:41:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec  3 02:41:13 2011] Using photon index=1.80, rate=0.0158, arf fullrun_pn_xmm0551870501_pi300-10000_pass1_cl_src12.arf
[Sat Dec  3 02:41:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec  3 02:41:13 2011] Updating source flux to 1.2e-13