[Sat Dec 31 21:50:42 2011] Detection parameters:
  Position = (215.7, 485.6) = 12 30 22.80 12 19 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 19.2
  Background counts = 83.3
  Rate = 0.006 +/- 0.001

[Sat Dec 31 21:50:43 2011] Off-axis axis estimate = 14.84'
[Sat Dec 31 21:57:02 2011] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 21:57:02 2011] Initial guess for spatial extent in simple fitting = 13.85"
[Sat Dec 31 21:57:02 2011] source mask rpix=3.2, npix_max = 54, mask sum = 47, frac = 0.866
[Sat Dec 31 21:57:02 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 13.85"
[Sun Jan  1 00:25:57 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jan  1 00:25:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_src8.csv
[Sun Jan  1 00:25:57 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jan  1 00:25:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_src8.csv
[Sun Jan  1 00:25:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 00:25:57 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jan  1 00:25:57 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jan  1 00:25:57 2012] Fit fullrun_pn_xmm0551870401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Jan  1 02:10:07 2012] Warning, spatial fit 8 centroid is now closest to src. 5
[Sun Jan  1 02:10:07 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 02:10:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 02:10:07 2012] Assessing source extent using major
[Sun Jan  1 02:10:07 2012] Source does appear to be extended
[Sun Jan  1 02:10:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 02:10:07 2012] Source is confused with source 3
[Sun Jan  1 02:10:21 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 02:10:21 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Sun Jan  1 02:10:21 2012] source mask rpix=3.2, npix_max = 54, mask sum = 47, frac = 0.866
[Sun Jan  1 02:10:21 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 13.85"
[Sun Jan  1 07:53:39 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jan  1 07:53:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_src8.csv
[Sun Jan  1 07:53:39 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jan  1 07:53:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_src8.csv
[Sun Jan  1 07:53:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 07:53:40 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jan  1 07:53:40 2012] fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jan  1 07:53:40 2012] Fit fullrun_pn_xmm0551870401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Jan  1 11:57:26 2012] Spatial fit model total counts = 1719.140000, observed total counts = 1863.000000
[Sun Jan  1 11:57:26 2012] Offset between fit and detection position for source 8 = 4.349021 pixels
[Sun Jan  1 11:57:26 2012] Warning, changing simple spatial fit ID from 8 to 7
[Sun Jan  1 11:57:26 2012] 1449.607800 total counts/ 23.547800 bgd. counts: snr = 293.874991
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.349021 pixels
  Position = (218.9, 482.7) = 12 30 21.85 12 18 48.4
  Extent = 27.6 (27.5-55.2)", rotation angle = 0
  Source counts = 1426.1 +/- 38.1
  Background counts = 23.5
  Rate = 0.2 +/- 0.004
[Sun Jan  1 11:57:26 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 11:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 11:57:26 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 11:57:26 2012] Source does appear to be extended
[Sun Jan  1 11:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 11:57:40 2012] Counts = 1426.060000, rescaling region sizes by 2.000000
[Sun Jan  1 11:57:40 2012] XMMSAS src. selection expression = ellipse(18993.370000, 41945.156000, 3309.432095, 3309.432095, 0.000000, X, Y)
[Sun Jan  1 11:57:40 2012] Writing source region out to fullrun_pn_xmm0551870401_pi300-10000_pass1_cl_src8_src.reg
[Sun Jan  1 11:57:40 2012] Extracting stamp from image fullrun_pn_xmm0551870401_pi300-10000_cl_sm2.00.img.gz, (29, 292) - (409, 595)
[Sun Jan  1 11:57:40 2012] XMMSAS bgd. selection expression = annulus(18993.370000, 41945.156000, 11031.440317, 22062.880635, X, Y) && !ellipse(7908.390800, 33184.971800, 573.545617, 573.545617, 0.000000, X, Y) && !ellipse(10803.785200, 34017.643400, 577.309617, 577.309617, 0.000000, X, Y) && !ellipse(18112.169876, 42021.243683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17488.435791, 41646.446472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20092.034515, 42686.110809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.481735, 42666.822021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19596.582153, 42412.486145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19317.230800, 42409.706000, 969.704028, 969.704028, 0.000000, X, Y) && !ellipse(19497.820374, 42047.332001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18942.344000, 41805.446000, 2185.432063, 2185.432063, 0.000000, X, Y) && !ellipse(24003.915600, 21628.012400, 340.413610, 340.413610, 0.000000, X, Y) && !ellipse(32365.238400, 30859.880800, 1560.280045, 1560.280045, 0.000000, X, Y) && !ellipse(22532.797800, 24262.466600, 513.423215, 513.423215, 0.000000, X, Y) && !ellipse(20528.374600, 42960.546000, 2144.816062, 2144.816062, 0.000000, X, Y)
[Sun Jan  1 11:57:40 2012] Writing fullrun_pn_xmm0551870401_pi300-10000_pass1_cl_src8.gif
[Sun Jan  1 12:04:46 2012] Mean detx,y = (-324.99, -14946.64) 
[Sun Jan  1 12:04:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 12:20:58 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 12:20:58 2012] Setting source spectrum file to fullrun_pn_xmm0551870401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jan  1 12:20:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551870401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jan  1 13:43:18 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:43:18 2012] Error reading totcts from fullrun_pn_xmm0551870401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jan  1 13:43:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:43:19 2012] Using photon index=1.80, rate=0.156, arf fullrun_pn_xmm0551870401_pi300-10000_pass1_cl_src8.arf
[Sun Jan  1 13:43:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:43:19 2012] Updating source flux to 9.5e-13
[Sun Jan  1 13:45:20 2012] Flag c found in src. 8 procflags, skipping spectral fitting