[Fri May 25 08:10:37 2012] Detection parameters:
  Position = (403.8, 390.9) = 12 31 47.15 12 38 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 608.2 +/- 31.6
  Background counts = 48.2
  Rate = 0.04 +/- 0.002

[Fri May 25 08:10:38 2012] Off-axis axis estimate = 10.17'
[Fri May 25 08:53:53 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Fri May 25 08:53:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 08:53:53 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Fri May 25 08:53:53 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.909
[Fri May 25 08:53:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.51"
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 25 10:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src1.csv
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 25 10:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src1.csv
[Fri May 25 10:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 25 10:07:50 2012] Fit fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 25 10:08:08 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.605613 pixels away
[Fri May 25 10:08:08 2012] Vigneting correction estimate = 1.000000
[Fri May 25 10:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 10:08:08 2012] Assessing source extent using major
[Fri May 25 10:08:08 2012] Source does appear to be extended
[Fri May 25 10:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 11:07:04 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Fri May 25 11:07:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 11:07:04 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Fri May 25 11:07:04 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.909
[Fri May 25 11:07:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.51"
[Fri May 25 12:39:56 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 12:39:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src1.csv
[Fri May 25 12:39:56 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 12:39:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src1.csv
[Fri May 25 12:39:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 12:39:57 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 12:39:57 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 12:39:57 2012] Fit fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 25 12:40:08 2012] Spatial fit model total counts = 1269.940000, observed total counts = 1272.000000
[Fri May 25 12:40:08 2012] Offset between fit and detection position for source 3 = 0.262917 pixels
[Fri May 25 12:40:08 2012] 1264.513000 total counts/ 848.460000 bgd. counts: snr = 14.283445
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.262917 pixels
  Position = (403.6, 390.9) = 12 31 47.23 12 38 36.3
  Extent = 5.9 (5.5-6.6)", rotation angle = 0
  Source counts = 416.1 +/- 35.6
  Background counts = 848.5
  Rate = 0.02 +/- 0.001
[Fri May 25 12:40:08 2012] Vigneting correction estimate = 1.000000
[Fri May 25 12:40:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 12:40:08 2012] Assessing source extent using major axis lower bound
[Fri May 25 12:40:08 2012] Source does appear to be extended
[Fri May 25 12:40:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 13:24:45 2012] XMMSAS src. selection expression = ellipse(35061.234400, 33962.294200, 356.934010, 356.934010, 0.000000, X, Y)
[Fri May 25 13:24:45 2012] Writing source region out to fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3_src.reg
[Fri May 25 13:24:45 2012] Extracting stamp from image fullrun_mos2_xmm0551870301_pi300-10000_cl_sm2.00.img.gz, (383, 370) - (424, 411)
[Fri May 25 13:24:45 2012] XMMSAS bgd. selection expression = annulus(35061.234400, 33962.294200, 594.890017, 1189.780034, X, Y)
[Fri May 25 13:24:45 2012] Writing fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3.gif
[Fri May 25 13:24:48 2012] Mean detx,y = (-10469.46, 1885.93) 
[Fri May 25 13:24:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 13:24:57 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 13:24:57 2012] Setting source spectrum file to fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 13:24:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 25 14:08:10 2012] Updating aperture counts using extracted products
[Fri May 25 14:08:10 2012] Error reading totcts from fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 14:08:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 14:08:11 2012] Using photon index=1.80, rate=0.0167, arf fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3.arf
[Fri May 25 14:08:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 14:08:11 2012] Updating source flux to 3.4e-13
[Fri May 25 14:11:01 2012] Reading fit data from xmm0551870301/analysis//spectral/fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3_pl.csv
[Fri May 25 14:11:01 2012] Spectral fit parameter nH value = 6.23507e+20
[Fri May 25 14:11:01 2012] Spectral fit parameter PhoIndex value = 2.14059
[Fri May 25 14:11:01 2012] Failed to get F(0.3-8.0) from xmm0551870301/analysis//spectral/fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri May 25 14:11:01 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 14:11:01 2012] Using Nh = 6.2e+20, photon index=2.14, rate=0.0167, arf fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src3.arf
[Fri May 25 14:11:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 14:11:01 2012] Updating source flux to 3.1e-13