[Fri May 25 08:10:38 2012] Detection parameters:
  Position = (489.2, 270.0) = 12 31 21.80 12 29 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.7 +/- 16.5
  Background counts = 41.5
  Rate = 0.004 +/- 0.0006

[Fri May 25 08:10:38 2012] Off-axis axis estimate = 13.98'
[Fri May 25 08:53:53 2012] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Fri May 25 08:53:53 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Fri May 25 08:53:53 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.089
[Fri May 25 08:53:53 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 13.42"
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src14.ximg exists
[Fri May 25 10:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src14.csv
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri May 25 10:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src14.csv
[Fri May 25 10:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri May 25 10:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 25 10:07:50 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri May 25 10:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 25 10:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 10:08:08 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.452007 pixels away
[Fri May 25 10:08:08 2012] Warning, spatial fit 14 centroid is now closest to src. 10
[Fri May 25 10:08:08 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.522500 pixels away
[Fri May 25 10:08:08 2012] Vigneting correction estimate = 1.000000
[Fri May 25 10:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 10:08:08 2012] Assessing source extent using major
[Fri May 25 10:08:08 2012] Source does appear to be extended
[Fri May 25 10:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 10:08:08 2012] Source is confused with source 12
[Fri May 25 10:08:08 2012] Source is confused with source 14
[Fri May 25 11:07:04 2012] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Fri May 25 11:07:04 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Fri May 25 11:07:04 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.089
[Fri May 25 11:07:04 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.42"
[Fri May 25 12:39:56 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 25 12:39:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src13.csv
[Fri May 25 12:39:56 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 25 12:39:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src13.csv
[Fri May 25 12:39:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 12:39:57 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 25 12:39:57 2012] fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 25 12:39:57 2012] Fit fullrun_mos2_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri May 25 12:40:08 2012] Warning, spatial fit 13 centroid is now closest to src. 12
[Fri May 25 12:40:08 2012] Spatial fit model total counts = 3240.580000, observed total counts = 2724.000000
[Fri May 25 12:40:08 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 25 12:40:08 2012] Source 13 is offset by -3.411931 and -3.605565 pixels which is larger than
2 X fitted extent = 1.514989 x 1.514989, not incorporating fit results
[Fri May 25 12:40:08 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.934423 pixels away
[Fri May 25 12:40:08 2012] Spatial fit model total counts = 1010.350000, observed total counts = 1000.000000
[Fri May 25 12:40:08 2012] Offset between fit and detection position for source 13 = 4.564436 pixels
[Fri May 25 12:40:08 2012] Warning, changing simple spatial fit ID from 13 to 22
[Fri May 25 12:40:08 2012] 825.516000 total counts/ 456.814000 bgd. counts: snr = 17.250663
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 4.564436 pixels
  Position = (485.9, 273.1) = 12 31 22.80 12 30 3.6
  Extent = 26.1 (26.0-52.1)", rotation angle = 0
  Source counts = 368.7 +/- 28.7
  Background counts = 456.8
  Rate = 0.01 +/- 0.001
[Fri May 25 12:40:08 2012] Vigneting correction estimate = 1.000000
[Fri May 25 12:40:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 12:40:08 2012] Assessing source extent using major axis lower bound
[Fri May 25 12:40:08 2012] Source does appear to be extended
[Fri May 25 12:40:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 13:24:45 2012] XMMSAS src. selection expression = ellipse(42220.972000, 23712.284000, 1563.444045, 1563.444045, 0.000000, X, Y)
[Fri May 25 13:24:45 2012] Writing source region out to fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src13_src.reg
[Fri May 25 13:24:45 2012] Extracting stamp from image fullrun_mos2_xmm0551870301_pi300-10000_cl_sm2.00.img.gz, (396, 183) - (576, 363)
[Fri May 25 13:24:45 2012] XMMSAS bgd. selection expression = annulus(42220.972000, 23712.284000, 2605.740075, 5211.480150, X, Y) && !ellipse(42181.304000, 21771.316000, 2123.808061, 2123.808061, 0.000000, X, Y) && !ellipse(41575.508900, 20622.036000, 1111.808032, 1111.808032, 0.000000, X, Y) && !ellipse(41766.086000, 21420.800000, 2517.296072, 2517.296072, 0.000000, X, Y) && !ellipse(41353.818000, 20422.839400, 1258.648036, 1258.648036, 0.000000, X, Y) && !ellipse(42397.536800, 24225.580000, 2099.088060, 2099.088060, 0.000000, X, Y) && !ellipse(40773.883200, 19240.994400, 982.280028, 982.280028, 0.000000, X, Y) && !ellipse(41004.654205, 24759.246796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41788.450714, 22654.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42025.096130, 23113.072876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41015.725677, 22326.326630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41625.761139, 21872.724167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41665.735260, 24228.540955, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 13:24:45 2012] Writing fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src13.gif
[Fri May 25 13:29:12 2012] Mean detx,y = (-12243.18, -10397.18) 
[Fri May 25 13:29:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 13:30:09 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 13:30:09 2012] Setting source spectrum file to fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 25 13:30:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May 25 14:08:10 2012] Updating aperture counts using extracted products
[Fri May 25 14:08:10 2012] Error reading totcts from fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 25 14:08:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 14:08:11 2012] Using photon index=1.80, rate=0.0148, arf fullrun_mos2_xmm0551870301_pi300-10000_pass1_cl_src13.arf
[Fri May 25 14:08:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 14:08:11 2012] Updating source flux to 3.3e-13
[Fri May 25 14:08:43 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Fri May 25 14:08:43 2012] Flag p found in src. 13 procflags, skipping spectral fitting
[Fri May 25 14:08:43 2012] Flag c found in src. 13 procflags, skipping spectral fitting