[Fri May 25 08:10:21 2012] Detection parameters:
  Position = (342.5, 371.1) = 12 32 5.37 12 37 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 13.3
  Background counts = 56.3
  Rate = 0.003 +/- 0.0006

[Fri May 25 08:10:21 2012] Off-axis axis estimate = 6.16'
[Fri May 25 08:27:11 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Fri May 25 08:27:11 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Fri May 25 08:27:11 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.901
[Fri May 25 08:27:11 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.51"
[Fri May 25 08:53:52 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 25 08:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_src10.csv
[Fri May 25 08:53:52 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 25 08:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_src10.csv
[Fri May 25 08:53:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 08:53:53 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 25 08:53:53 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 25 08:53:53 2012] Fit fullrun_mos1_xmm0551870301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri May 25 10:08:00 2012] Spatial fit model total counts = 523.602000, observed total counts = 523.000000
[Fri May 25 10:08:00 2012] Offset between fit and detection position for source 3 = 0.355192 pixels
[Fri May 25 10:08:00 2012] 516.557900 total counts/ 472.664000 bgd. counts: snr = 2.018961
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.355192 pixels
  Position = (342.8, 370.8) = 12 32 5.29 12 37 9.1
  Extent = 4.7 (3.1-8.1)", rotation angle = 0
  Source counts = 43.9 +/- 22.7
  Background counts = 472.7
  Rate = 0.002 +/- 0.0009
[Fri May 25 10:08:00 2012] Vigneting correction estimate = 1.000000
[Fri May 25 10:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 10:08:00 2012] Assessing source extent using major axis lower bound
[Fri May 25 10:08:00 2012] Source does appear to be extended
[Fri May 25 10:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 10:35:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 10:35:00 2012] Initial guess for spatial extent in simple fitting = 4.68"
[Fri May 25 10:35:00 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.905
[Fri May 25 10:35:00 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.68"
[Fri May 25 11:07:04 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 25 11:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_src10.csv
[Fri May 25 11:07:04 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 25 11:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_src10.csv
[Fri May 25 11:07:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:07:04 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 25 11:07:04 2012] fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 25 11:07:04 2012] Fit fullrun_mos1_xmm0551870301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri May 25 12:40:04 2012] Spatial fit model total counts = 510.369000, observed total counts = 511.000000
[Fri May 25 12:40:04 2012] Offset between fit and detection position for source 3 = 0.029818 pixels
[Fri May 25 12:40:04 2012] 504.734800 total counts/ 459.112000 bgd. counts: snr = 2.129230
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.029818 pixels
  Position = (342.7, 370.9) = 12 32 5.30 12 37 9.1
  Extent = 5.0 (3.1-8.3)", rotation angle = 0
  Source counts = 45.6 +/- 22.5
  Background counts = 459.1
  Rate = 0.002 +/- 0.0009
[Fri May 25 12:40:04 2012] Vigneting correction estimate = 1.000000
[Fri May 25 12:40:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 12:40:04 2012] Assessing source extent using major axis lower bound
[Fri May 25 12:40:04 2012] Source does appear to be extended
[Fri May 25 12:40:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 13:02:12 2012] XMMSAS src. selection expression = ellipse(29770.238400, 32216.548000, 299.496609, 299.496609, 0.000000, X, Y)
[Fri May 25 13:02:12 2012] Writing source region out to fullrun_mos1_xmm0551870301_pi300-10000_pass1_cl_src3_src.reg
[Fri May 25 13:02:12 2012] Extracting stamp from image fullrun_mos1_xmm0551870301_pi300-10000_cl_sm2.00.img.gz, (326, 354) - (360, 388)
[Fri May 25 13:02:12 2012] XMMSAS bgd. selection expression = annulus(29770.238400, 32216.548000, 499.161014, 998.322029, X, Y)
[Fri May 25 13:02:12 2012] Writing fullrun_mos1_xmm0551870301_pi300-10000_pass1_cl_src3.gif
[Fri May 25 13:04:11 2012] Mean detx,y = (2683.01, 4774.69) 
[Fri May 25 13:04:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 13:04:19 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 13:04:19 2012] Setting source spectrum file to fullrun_mos1_xmm0551870301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 13:04:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551870301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 25 13:24:01 2012] Not generating rmf since there are only 45 counts
[Fri May 25 13:24:01 2012] rmf not generated due to insufficient counts
[Fri May 25 14:08:09 2012] Updating aperture counts using extracted products
[Fri May 25 14:08:09 2012] Error reading totcts from fullrun_mos1_xmm0551870301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 14:08:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 14:08:10 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0551870301_pi300-10000_pass1_cl_src3.arf
[Fri May 25 14:08:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 14:08:10 2012] Updating source flux to 2.7e-14
[Fri May 25 14:08:12 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting