[Sat Aug 11 00:23:40 2012] Detection parameters: Position = (320.3, 308.9) = 19 14 25.94 24 56 42.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 4526.3 +/- 81.0 Background counts = 6.8 Rate = 0.3 +/- 0.006 [Sat Aug 11 00:23:41 2012] Off-axis axis estimate = 1.76' [Sat Aug 11 01:38:43 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting [Sat Aug 11 01:38:43 2012] Initial guess for spatial extent in simple fitting = 7.31" [Sat Aug 11 01:38:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052 [Sat Aug 11 01:38:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31" [Sat Aug 11 01:57:59 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass0_src1.ximg exists [Sat Aug 11 01:57:59 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Aug 11 01:57:59 2012] Fit fullrun_mos1_xmm0551860501_pi300-10000_cl_pass0_src1 appears to have run properly [Sat Aug 11 01:57:59 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Aug 11 01:57:59 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Aug 11 01:57:59 2012] Fit fullrun_mos1_xmm0551860501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Aug 11 02:19:09 2012] Spatial fit model total counts = 3985.000000, observed total counts = 3985.000000 [Sat Aug 11 02:19:09 2012] Offset between fit and detection position for source 1 = 0.164846 pixels [Sat Aug 11 02:19:09 2012] 3987.734000 total counts/ 919.894000 bgd. counts: snr = 101.149517 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.164846 pixels Position = (320.2, 308.8) = 19 14 25.99 24 56 42.5 Extent = 5.4 (5.2-5.6)", rotation angle = 0 Source counts = 3067.8 +/- 63.1 Background counts = 919.9 Rate = 0.2 +/- 0.005 [Sat Aug 11 02:19:09 2012] Vigneting correction estimate = 1.000000 [Sat Aug 11 02:19:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 11 02:19:09 2012] Assessing source extent using major axis lower bound [Sat Aug 11 02:19:09 2012] Source does appear to be extended [Sat Aug 11 02:19:09 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 11 03:18:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Aug 11 03:18:49 2012] Initial guess for spatial extent in simple fitting = 5.39" [Sat Aug 11 03:18:49 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.321 [Sat Aug 11 03:18:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39" [Sat Aug 11 03:36:10 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_src1.ximg exists [Sat Aug 11 03:36:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_src1.csv [Sat Aug 11 03:36:10 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Aug 11 03:36:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_src1.csv [Sat Aug 11 03:36:10 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 11 03:36:10 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Aug 11 03:36:10 2012] fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Aug 11 03:36:10 2012] Fit fullrun_mos1_xmm0551860501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Aug 11 03:57:55 2012] Spatial fit model total counts = 3990.010000, observed total counts = 3990.000000 [Sat Aug 11 03:57:55 2012] Offset between fit and detection position for source 1 = 0.014755 pixels [Sat Aug 11 03:57:55 2012] 4011.742000 total counts/ 938.062000 bgd. counts: snr = 100.355893 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.014755 pixels Position = (320.2, 308.8) = 19 14 25.99 24 56 42.4 Extent = 5.4 (5.3-5.6)", rotation angle = 0 Source counts = 3073.7 +/- 63.3 Background counts = 938.1 Rate = 0.2 +/- 0.005 [Sat Aug 11 03:57:55 2012] Vigneting correction estimate = 1.000000 [Sat Aug 11 03:57:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 11 03:57:55 2012] Assessing source extent using major axis lower bound [Sat Aug 11 03:57:55 2012] Source does appear to be extended [Sat Aug 11 03:57:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 11 05:15:16 2012] Counts = 3073.680000, rescaling region sizes by 2.000000 [Sat Aug 11 05:15:16 2012] XMMSAS src. selection expression = ellipse(27809.692900, 26813.958000, 649.593619, 649.593619, 0.000000, X, Y) [Sat Aug 11 05:15:16 2012] Writing source region out to fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1_src.reg [Sat Aug 11 05:15:16 2012] Extracting stamp from image fullrun_mos1_xmm0551860501_pi300-10000_cl_sm2.00.img.gz, (283, 271) - (358, 346) [Sat Aug 11 05:15:16 2012] XMMSAS bgd. selection expression = annulus(27809.692900, 26813.958000, 2165.312062, 4330.624125, X, Y) && !ellipse(31581.408295, 27456.419373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24093.171631, 31534.732880, 870.000000, 870.000000, 0.000000, X, Y) [Sat Aug 11 05:15:16 2012] Writing fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1.gif [Sat Aug 11 05:15:17 2012] Mean detx,y = (316.79, -169.34) [Sat Aug 11 05:15:18 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 11 05:15:33 2012] Binned source spectrum to 10 counts/bin [Sat Aug 11 05:15:33 2012] Setting source spectrum file to fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Aug 11 05:15:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Aug 11 05:43:46 2012] Updating aperture counts using extracted products [Sat Aug 11 05:43:46 2012] Error reading totcts from fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Aug 11 05:43:47 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 11 05:43:47 2012] Using photon index=1.80, rate=0.227, arf fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1.arf [Sat Aug 11 05:43:47 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 11 05:43:47 2012] Updating source flux to 2.2e-12 [Sat Aug 11 05:44:47 2012] Reading fit data from xmm0551860501/analysis//spectral/fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1_pl.csv [Sat Aug 11 05:44:47 2012] Spectral fit parameter nH value = 6.45522e+21 [Sat Aug 11 05:44:47 2012] Spectral fit parameter PhoIndex value = 9.9986 [Sat Aug 11 05:44:47 2012] Failed to get F(0.3-8.0) from xmm0551860501/analysis//spectral/fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat Aug 11 05:44:47 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 11 05:44:47 2012] Using Nh = 6.5e+21, photon index=10.00, rate=0.227, arf fullrun_mos1_xmm0551860501_pi300-10000_pass1_cl_src1.arf [Sat Aug 11 05:44:47 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 11 05:44:47 2012] Updating source flux to 1.3e-12