[Wed May 30 01:31:49 2012] Detection parameters:
  Position = (350.4, 270.9) = 8 6 4.29 15 27 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 10.5
  Background counts = 13.9
  Rate = 0.009 +/- 0.002

[Wed May 30 01:31:49 2012] Off-axis axis estimate = 4.26'
[Wed May 30 01:33:08 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed May 30 01:33:08 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Wed May 30 01:33:08 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Wed May 30 01:33:08 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.56"
[Wed May 30 02:05:19 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 30 02:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_src20.csv
[Wed May 30 02:05:19 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 30 02:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_src20.csv
[Wed May 30 02:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:05:19 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 30 02:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 30 02:05:19 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 30 02:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 30 02:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:35:33 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.039561 pixels away
[Wed May 30 02:35:33 2012] Vigneting correction estimate = 1.000000
[Wed May 30 02:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 02:35:33 2012] Assessing source extent using major
[Wed May 30 02:35:33 2012] Source does appear to be extended
[Wed May 30 02:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 02:35:45 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:35:45 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Wed May 30 02:35:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Wed May 30 02:35:45 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.56"
[Wed May 30 03:07:45 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass1_src19.ximg exists
[Wed May 30 03:07:45 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed May 30 03:07:45 2012] Fit fullrun_pn_xmm0551860101_pi300-10000_cl_pass1_src19 appears to have run properly
[Wed May 30 03:07:45 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed May 30 03:07:45 2012] fullrun_pn_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed May 30 03:07:45 2012] Fit fullrun_pn_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed May 30 03:32:55 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 38.908077 pixels away
[Wed May 30 03:32:55 2012] Spatial fit model total counts = 229.151000, observed total counts = 213.000000
[Wed May 30 03:32:55 2012] Offset between fit and detection position for source 20 = 0.128573 pixels
[Wed May 30 03:32:55 2012] 234.051100 total counts/ 204.004000 bgd. counts: snr = 2.103697
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.128573 pixels
  Position = (350.2, 271.0) = 8 6 4.33 15 27 8.9
  Extent = 3.8 (2.9-6.3)", rotation angle = 0
  Source counts = 30.0 +/- 15.3
  Background counts = 204.0
  Rate = 0.003 +/- 0.002
[Wed May 30 03:32:55 2012] Vigneting correction estimate = 1.000000
[Wed May 30 03:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 03:32:55 2012] Assessing source extent using major axis lower bound
[Wed May 30 03:32:55 2012] Source does appear to be extended
[Wed May 30 03:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:33:04 2012] XMMSAS src. selection expression = ellipse(30421.373040, 23526.526800, 230.762407, 230.762407, 0.000000, X, Y)
[Wed May 30 03:33:04 2012] Writing source region out to fullrun_pn_xmm0551860101_pi300-10000_pass1_cl_src20_src.reg
[Wed May 30 03:33:04 2012] Extracting stamp from image fullrun_pn_xmm0551860101_pi300-10000_cl_sm2.00.img.gz, (337, 258) - (363, 284)
[Wed May 30 03:33:04 2012] XMMSAS bgd. selection expression = annulus(30421.373040, 23526.526800, 384.604011, 769.208022, X, Y)
[Wed May 30 03:33:04 2012] Writing fullrun_pn_xmm0551860101_pi300-10000_pass1_cl_src20.gif
[Wed May 30 03:39:52 2012] Mean detx,y = (-5029.54, -1724.28) 
[Wed May 30 03:39:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 03:40:03 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 03:40:03 2012] Setting source spectrum file to fullrun_pn_xmm0551860101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May 30 03:40:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551860101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed May 30 03:48:46 2012] Not generating rmf since there are only 30 counts
[Wed May 30 03:48:46 2012] rmf not generated due to insufficient counts
[Wed May 30 04:05:34 2012] Updating aperture counts using extracted products
[Wed May 30 04:05:34 2012] Error reading totcts from fullrun_pn_xmm0551860101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May 30 04:05:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 04:05:35 2012] Using photon index=1.80, rate=0.00299, arf fullrun_pn_xmm0551860101_pi300-10000_pass1_cl_src20.arf
[Wed May 30 04:05:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 04:05:35 2012] Updating source flux to 1.5e-14
[Wed May 30 04:05:48 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting