[Wed May 30 01:32:21 2012] Detection parameters:
  Position = (213.6, 416.8) = 8 6 45.44 15 37 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.1 +/- 9.1
  Background counts = 5.3
  Rate = 0.004 +/- 0.0008

[Wed May 30 01:32:21 2012] Off-axis axis estimate = 10.55'
[Wed May 30 02:18:49 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:18:49 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Wed May 30 02:18:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.031
[Wed May 30 02:18:49 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.71"
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 30 02:35:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src11.csv
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 30 02:35:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src11.csv
[Wed May 30 02:35:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 30 02:35:28 2012] Fit fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed May 30 02:35:38 2012] Source 7 is offset by 3.475764 and 2.585734 pixels which is larger than
2 X fitted extent = 1.353425 x 1.353425, not incorporating fit results
[Wed May 30 02:35:38 2012] Warning, spatial fit 11 centroid is now closest to src. 4
[Wed May 30 02:35:38 2012] Vigneting correction estimate = 1.000000
[Wed May 30 02:35:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 02:35:38 2012] Assessing source extent using major
[Wed May 30 02:35:38 2012] Source does appear to be extended
[Wed May 30 02:35:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:18:54 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Wed May 30 03:18:54 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Wed May 30 03:18:54 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.031
[Wed May 30 03:18:54 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.71"
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src11.ximg exists
[Wed May 30 03:32:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src11.csv
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed May 30 03:32:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src11.csv
[Wed May 30 03:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:32:52 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed May 30 03:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 30 03:32:52 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May 30 03:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 30 03:32:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:32:58 2012] Spatial fit model total counts = 748.370000, observed total counts = 749.000000
[Wed May 30 03:32:58 2012] Offset between fit and detection position for source 7 = 0.254704 pixels
[Wed May 30 03:32:58 2012] Warning, changing simple spatial fit ID from 11 to 2
[Wed May 30 03:32:58 2012] 690.145000 total counts/ 690.145000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.254704 pixels
  Position = (213.9, 416.9) = 8 6 45.37 15 37 43.5
  Extent = 2.5 (2.5-37.2)", rotation angle = 0
  Source counts = 0.0 +/- 26.3
  Background counts = 690.1
  Rate = 2e-12 +/- 0.002
  Deleting source due to low Poisson probability