[Wed May 30 01:32:21 2012] Detection parameters:
  Position = (288.4, 276.1) = 8 6 22.93 15 27 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 973.2 +/- 36.8
  Background counts = 4.9
  Rate = 0.09 +/- 0.003

[Wed May 30 01:32:21 2012] Off-axis axis estimate = 1.78'
[Wed May 30 02:18:49 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:18:49 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed May 30 02:18:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Wed May 30 02:18:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed May 30 02:35:27 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 02:35:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src1.csv
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 02:35:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src1.csv
[Wed May 30 02:35:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 02:35:28 2012] Fit fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 02:35:38 2012] Spatial fit model total counts = 958.413000, observed total counts = 929.000000
[Wed May 30 02:35:38 2012] Offset between fit and detection position for source 3 = 0.121774 pixels
[Wed May 30 02:35:38 2012] 957.126000 total counts/ 268.253000 bgd. counts: snr = 42.059768
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.121774 pixels
  Position = (288.5, 276.2) = 8 6 22.91 15 27 31.7
  Extent = 5.5 (5.2-5.9)", rotation angle = 0
  Source counts = 688.9 +/- 30.9
  Background counts = 268.3
  Rate = 0.06 +/- 0.003
[Wed May 30 02:35:38 2012] Vigneting correction estimate = 1.000000
[Wed May 30 02:35:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 02:35:38 2012] Assessing source extent using major axis lower bound
[Wed May 30 02:35:38 2012] Source does appear to be extended
[Wed May 30 02:35:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:18:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 03:18:54 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Wed May 30 03:18:54 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.954
[Wed May 30 03:18:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 03:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src1.csv
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 03:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src1.csv
[Wed May 30 03:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 03:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 03:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 30 03:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:32:58 2012] Warning, spatial fit 1 centroid is now closest to src. 12
[Wed May 30 03:32:58 2012] Vigneting correction estimate = 1.000000
[Wed May 30 03:32:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 03:32:58 2012] Assessing source extent using major axis lower bound
[Wed May 30 03:32:58 2012] Source does appear to be extended
[Wed May 30 03:32:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:56:00 2012] XMMSAS src. selection expression = ellipse(25047.163600, 23981.374200, 332.237410, 332.237410, 0.000000, X, Y)
[Wed May 30 03:56:00 2012] Writing source region out to fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3_src.reg
[Wed May 30 03:56:00 2012] Extracting stamp from image fullrun_mos2_xmm0551860101_pi300-10000_cl_sm2.00.img.gz, (269, 257) - (308, 295)
[Wed May 30 03:56:00 2012] XMMSAS bgd. selection expression = annulus(25047.163600, 23981.374200, 553.729016, 1107.458032, X, Y)
[Wed May 30 03:56:00 2012] Writing fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3.gif
[Wed May 30 03:56:02 2012] Mean detx,y = (-8.92, 119.69) 
[Wed May 30 03:56:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 03:56:07 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 03:56:07 2012] Setting source spectrum file to fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 03:56:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 30 04:05:35 2012] Updating aperture counts using extracted products
[Wed May 30 04:05:35 2012] Error reading totcts from fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 04:05:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 04:05:35 2012] Using photon index=1.80, rate=0.0593, arf fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3.arf
[Wed May 30 04:05:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 04:05:35 2012] Updating source flux to 6.7e-13
[Wed May 30 04:05:48 2012] Reading fit data from xmm0551860101/analysis//spectral/fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3_pl.csv
[Wed May 30 04:05:48 2012] Spectral fit parameter nH value = 7.98323e+20
[Wed May 30 04:05:48 2012] Spectral fit parameter PhoIndex value = 7.26797
[Wed May 30 04:05:48 2012] Failed to get F(0.3-8.0) from xmm0551860101/analysis//spectral/fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed May 30 04:05:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 04:05:48 2012] Using Nh = 8e+20, photon index=7.27, rate=0.0593, arf fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src3.arf
[Wed May 30 04:05:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 04:05:48 2012] Updating source flux to 5e-13