[Wed May 30 01:32:21 2012] Detection parameters:
  Position = (189.1, 302.8) = 8 6 52.80 15 29 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.9 +/- 13.8
  Background counts = 5.2
  Rate = 0.02 +/- 0.002

[Wed May 30 01:32:21 2012] Off-axis axis estimate = 7.93'
[Wed May 30 02:18:49 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:18:49 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Wed May 30 02:18:49 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.078
[Wed May 30 02:18:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.39"
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 30 02:35:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src3.csv
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 30 02:35:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src3.csv
[Wed May 30 02:35:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 30 02:35:28 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 30 02:35:28 2012] Fit fullrun_mos2_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 30 02:35:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.748012 pixels away
[Wed May 30 02:35:38 2012] Vigneting correction estimate = 1.000000
[Wed May 30 02:35:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 02:35:38 2012] Assessing source extent using major
[Wed May 30 02:35:38 2012] Source does appear to be extended
[Wed May 30 02:35:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:18:54 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Wed May 30 03:18:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 03:18:54 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Wed May 30 03:18:54 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.078
[Wed May 30 03:18:54 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.39"
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 30 03:32:51 2012] Fit fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 30 03:32:51 2012] fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 30 03:32:51 2012] Fit fullrun_mos2_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 30 03:32:58 2012] Warning, spatial fit 3 centroid is now closest to src. 12
[Wed May 30 03:32:58 2012] Vigneting correction estimate = 1.000000
[Wed May 30 03:32:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 03:32:58 2012] Assessing source extent using major
[Wed May 30 03:32:58 2012] Source does appear to be extended
[Wed May 30 03:32:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:56:00 2012] XMMSAS src. selection expression = ellipse(16406.395859, 26295.914032, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 03:56:00 2012] Writing source region out to fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src2_src.reg
[Wed May 30 03:56:00 2012] Extracting stamp from image fullrun_mos2_xmm0551860101_pi300-10000_cl_sm2.00.img.gz, (152, 265) - (227, 340)
[Wed May 30 03:56:01 2012] XMMSAS bgd. selection expression = annulus(16406.395859, 26295.914032, 1087.500000, 2175.000000, X, Y) && !ellipse(14475.471720, 27642.803600, 359.755210, 359.755210, 0.000000, X, Y) && !ellipse(17515.372800, 25016.399600, 397.952011, 397.952011, 0.000000, X, Y)
[Wed May 30 03:56:01 2012] Writing fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src2.gif
[Wed May 30 03:56:15 2012] Mean detx,y = (-8086.18, -3672.98) 
[Wed May 30 03:56:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 03:56:25 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 03:56:25 2012] Setting source spectrum file to fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 03:56:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 30 04:04:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 04:04:38 2012] rmf not generated due to insufficient counts
[Wed May 30 04:05:35 2012] Updating aperture counts using extracted products
[Wed May 30 04:05:35 2012] Error reading totcts from fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 04:05:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 04:05:35 2012] Using photon index=1.80, rate=0.0153, arf fullrun_mos2_xmm0551860101_pi300-10000_pass1_cl_src2.arf
[Wed May 30 04:05:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 04:05:35 2012] Updating source flux to 2.2e-13
[Wed May 30 04:05:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting