[Wed May 30 01:32:02 2012] Detection parameters:
  Position = (190.8, 334.1) = 8 6 52.29 15 31 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.5 +/- 6.9
  Background counts = 5.1
  Rate = 0.003 +/- 0.001

[Wed May 30 01:32:02 2012] Off-axis axis estimate = 8.22'
[Wed May 30 02:05:20 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:05:20 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Wed May 30 02:05:20 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Wed May 30 02:05:20 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.54"
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 30 02:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src10.csv
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 30 02:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src10.csv
[Wed May 30 02:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 30 02:18:49 2012] Fit fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed May 30 02:35:35 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.014628 pixels away
[Wed May 30 02:35:35 2012] Spatial fit model total counts = 67.593500, observed total counts = 64.000000
[Wed May 30 02:35:35 2012] Offset between fit and detection position for source 5 = 0.440392 pixels
[Wed May 30 02:35:35 2012] 70.066000 total counts/ 52.831000 bgd. counts: snr = 2.371193
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.440392 pixels
  Position = (190.4, 334.3) = 8 6 52.42 15 31 44.1
  Extent = 4.8 (2.6-6.7)", rotation angle = 0
  Source counts = 17.2 +/- 8.4
  Background counts = 52.8
  Rate = 0.001 +/- 0.0007
[Wed May 30 02:35:35 2012] Vigneting correction estimate = 1.000000
[Wed May 30 02:35:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 02:35:35 2012] Assessing source extent using major axis lower bound
[Wed May 30 02:35:35 2012] Source does appear to be extended
[Wed May 30 02:35:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:07:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 03:07:45 2012] Initial guess for spatial extent in simple fitting = 4.83"
[Wed May 30 03:07:45 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.867
[Wed May 30 03:07:45 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.83"
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src10.ximg exists
[Wed May 30 03:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src10.csv
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May 30 03:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src10.csv
[Wed May 30 03:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May 30 03:18:54 2012] Fit fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed May 30 03:32:56 2012] Warning, spatial fit 10 centroid is now closest to src. 4
[Wed May 30 03:32:56 2012] Vigneting correction estimate = 1.000000
[Wed May 30 03:32:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 03:32:56 2012] Assessing source extent using major axis lower bound
[Wed May 30 03:32:56 2012] Source does appear to be extended
[Wed May 30 03:32:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:49:44 2012] XMMSAS src. selection expression = ellipse(16518.521600, 29032.125800, 290.058008, 290.058008, 0.000000, X, Y)
[Wed May 30 03:49:44 2012] Writing source region out to fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src5_src.reg
[Wed May 30 03:49:44 2012] Extracting stamp from image fullrun_mos1_xmm0551860101_pi300-10000_cl_sm2.00.img.gz, (174, 318) - (207, 351)
[Wed May 30 03:49:44 2012] XMMSAS bgd. selection expression = annulus(16518.521600, 29032.125800, 483.430014, 966.860028, X, Y) && !ellipse(16668.694168, 29747.043243, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 03:49:44 2012] Writing fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src5.gif
[Wed May 30 03:51:28 2012] Mean detx,y = (-6207.61, 7308.87) 
[Wed May 30 03:51:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 03:51:33 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 03:51:33 2012] Setting source spectrum file to fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 30 03:51:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May 30 03:55:44 2012] Not generating rmf since there are only 17 counts
[Wed May 30 03:55:44 2012] rmf not generated due to insufficient counts
[Wed May 30 04:05:35 2012] Updating aperture counts using extracted products
[Wed May 30 04:05:35 2012] Error reading totcts from fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 30 04:05:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 04:05:35 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src5.arf
[Wed May 30 04:05:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 04:05:35 2012] Updating source flux to 2.6e-14
[Wed May 30 04:05:36 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting