[Wed May 30 01:32:02 2012] Detection parameters:
  Position = (188.9, 302.2) = 8 6 52.86 15 29 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.8 +/- 13.2
  Background counts = 4.0
  Rate = 0.009 +/- 0.001

[Wed May 30 01:32:02 2012] Off-axis axis estimate = 7.94'
[Wed May 30 02:05:20 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Wed May 30 02:05:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 02:05:20 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Wed May 30 02:05:20 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.987
[Wed May 30 02:05:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.40"
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 30 02:18:49 2012] Fit fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 30 02:18:49 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 30 02:18:49 2012] Fit fullrun_mos1_xmm0551860101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May 30 02:35:35 2012] Spatial fit model total counts = 133.871000, observed total counts = 143.000000
[Wed May 30 02:35:35 2012] Offset between fit and detection position for source 2 = 0.601157 pixels
[Wed May 30 02:35:35 2012] 133.182100 total counts/ 62.320100 bgd. counts: snr = 8.976341
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.601157 pixels
  Position = (188.3, 302.2) = 8 6 53.04 15 29 24.7
  Extent = 8.4 (6.5-10.5)" x 4.1 (2.8-6.3)", rotation angle = 322 (302-340) degrees
  Source counts = 70.9 +/- 11.5
  Background counts = 62.3
  Rate = 0.006 +/- 0.001
[Wed May 30 02:35:35 2012] Vigneting correction estimate = 1.000000
[Wed May 30 02:35:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 02:35:35 2012] Assessing source extent using major axis lower bound
[Wed May 30 02:35:35 2012] Source does appear to be extended
[Wed May 30 02:35:35 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Wed May 30 03:07:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 03:07:45 2012] Initial guess for spatial extent in simple fitting = 6.26"
[Wed May 30 03:07:45 2012] source mask rpix=1.4, npix_max = 15, mask sum = 15, frac = 0.996
[Wed May 30 03:07:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.26"
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 30 03:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src2.csv
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 30 03:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src2.csv
[Wed May 30 03:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 30 03:18:54 2012] fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 30 03:18:54 2012] Fit fullrun_mos1_xmm0551860101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May 30 03:32:56 2012] Spatial fit model total counts = 139.650000, observed total counts = 144.000000
[Wed May 30 03:32:56 2012] Offset between fit and detection position for source 2 = 0.064267 pixels
[Wed May 30 03:32:56 2012] 139.871500 total counts/ 52.455800 bgd. counts: snr = 12.069595
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.064267 pixels
  Position = (188.3, 302.2) = 8 6 53.06 15 29 24.7
  Extent = 7.7 (5.9-9.4)", rotation angle = 0
  Source counts = 87.4 +/- 11.8
  Background counts = 52.5
  Rate = 0.008 +/- 0.001
[Wed May 30 03:32:56 2012] Vigneting correction estimate = 1.000000
[Wed May 30 03:32:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 03:32:56 2012] Assessing source extent using major axis lower bound
[Wed May 30 03:32:56 2012] Source does appear to be extended
[Wed May 30 03:32:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 03:49:44 2012] XMMSAS src. selection expression = ellipse(16330.493400, 26244.213000, 463.849813, 463.849813, 0.000000, X, Y)
[Wed May 30 03:49:44 2012] Writing source region out to fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src2_src.reg
[Wed May 30 03:49:44 2012] Extracting stamp from image fullrun_mos1_xmm0551860101_pi300-10000_cl_sm2.00.img.gz, (162, 276) - (215, 329)
[Wed May 30 03:49:44 2012] XMMSAS bgd. selection expression = annulus(16330.493400, 26244.213000, 773.083022, 1546.166044, X, Y) && !ellipse(14474.157135, 27703.148590, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 03:49:44 2012] Writing fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src2.gif
[Wed May 30 03:49:52 2012] Mean detx,y = (-3493.03, 7994.20) 
[Wed May 30 03:49:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 03:49:58 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 03:49:58 2012] Setting source spectrum file to fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 03:49:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 30 03:55:18 2012] Not generating rmf since there are only 87 counts
[Wed May 30 03:55:18 2012] rmf not generated due to insufficient counts
[Wed May 30 04:05:35 2012] Updating aperture counts using extracted products
[Wed May 30 04:05:35 2012] Error reading totcts from fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 04:05:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 04:05:35 2012] Using photon index=1.80, rate=0.00753, arf fullrun_mos1_xmm0551860101_pi300-10000_pass1_cl_src2.arf
[Wed May 30 04:05:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 04:05:35 2012] Updating source flux to 1.2e-13
[Wed May 30 04:05:36 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting