[Wed Jul 25 10:53:48 2012] Detection parameters:
  Position = (299.2, 307.7) = 7 44 56.50 39 27 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 422.8 +/- 30.5
  Background counts = 98.3
  Rate = 0.005 +/- 0.0004

[Wed Jul 25 10:53:49 2012] Off-axis axis estimate = 0.68'
[Wed Jul 25 13:00:11 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 13:00:11 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Wed Jul 25 13:00:11 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Wed Jul 25 13:00:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 6.77"
[Wed Jul 25 13:41:23 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jul 25 13:41:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_src5.csv
[Wed Jul 25 13:41:23 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jul 25 13:41:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_src5.csv
[Wed Jul 25 13:41:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 13:41:23 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul 25 13:41:23 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul 25 13:41:23 2012] Fit fullrun_mos1_xmm0551851201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jul 25 14:36:48 2012] Source 7 is offset by -6.024367 and 4.733008 pixels which is larger than
2 X fitted extent = 2.300349 x 2.300349, not incorporating fit results
[Wed Jul 25 14:36:48 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 14:36:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 14:36:48 2012] Assessing source extent using major
[Wed Jul 25 14:36:48 2012] Source does appear to be extended
[Wed Jul 25 14:36:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 16:44:27 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 16:44:27 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Wed Jul 25 16:44:27 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Wed Jul 25 16:44:27 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.77"
[Wed Jul 25 18:04:44 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jul 25 18:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_src5.csv
[Wed Jul 25 18:04:44 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jul 25 18:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_src5.csv
[Wed Jul 25 18:04:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:04:44 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jul 25 18:04:44 2012] fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jul 25 18:04:44 2012] Fit fullrun_mos1_xmm0551851201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jul 25 18:56:00 2012] Source 7 is offset by -6.024367 and 4.623146 pixels which is larger than
2 X fitted extent = 3.953007 x 3.953007, not incorporating fit results
[Wed Jul 25 18:56:00 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:56:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:56:00 2012] Assessing source extent using major
[Wed Jul 25 18:56:00 2012] Source does appear to be extended
[Wed Jul 25 18:56:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 21:10:05 2012] XMMSAS src. selection expression = ellipse(25981.670074, 26722.919739, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 21:10:05 2012] Writing source region out to fullrun_mos1_xmm0551851201_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul 25 21:10:05 2012] Extracting stamp from image fullrun_mos1_xmm0551851201_pi300-10000_cl_sm2.00.img.gz, (262, 270) - (337, 345)
[Wed Jul 25 21:10:05 2012] XMMSAS bgd. selection expression = annulus(25981.670074, 26722.919739, 1087.500000, 2175.000000, X, Y) && !ellipse(26846.621270, 26283.662535, 971.778239, 838.572217, 5.558665, X, Y) && !ellipse(27944.715000, 24212.146760, 352.412010, 352.412010, 0.000000, X, Y) && !ellipse(28236.191600, 28740.614000, 710.182420, 710.182420, 0.000000, X, Y) && !ellipse(26152.205261, 25290.048218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.470490, 27824.576355, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 21:10:05 2012] Writing fullrun_mos1_xmm0551851201_pi300-10000_pass1_cl_src7.gif
[Wed Jul 25 21:13:59 2012] Mean detx,y = (-781.45, -974.46) 
[Wed Jul 25 21:14:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 21:14:08 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 21:14:08 2012] Setting source spectrum file to fullrun_mos1_xmm0551851201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 25 21:14:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551851201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jul 25 21:29:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 21:29:38 2012] rmf not generated due to insufficient counts
[Wed Jul 25 22:20:37 2012] Updating aperture counts using extracted products
[Wed Jul 25 22:20:37 2012] Error reading totcts from fullrun_mos1_xmm0551851201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 25 22:20:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 22:20:38 2012] Using photon index=1.80, rate=0.00503, arf fullrun_mos1_xmm0551851201_pi300-10000_pass1_cl_src7.arf
[Wed Jul 25 22:20:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 22:20:38 2012] Updating source flux to 4.9e-14
[Wed Jul 25 22:20:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting