[Thu Aug 16 12:30:21 2012] Detection parameters:
  Position = (268.9, 226.9) = 6 48 5.14 70 9 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.1 +/- 21.8
  Background counts = 106.1
  Rate = 0.004 +/- 0.0005

[Thu Aug 16 12:30:21 2012] Off-axis axis estimate = 5.61'
[Thu Aug 16 12:33:53 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 12:33:53 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Thu Aug 16 12:33:53 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.309
[Thu Aug 16 12:33:53 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 9.23"
[Thu Aug 16 13:47:01 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass0_src38.ximg exists
[Thu Aug 16 13:47:01 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu Aug 16 13:47:01 2012] Fit fullrun_pn_xmm0551850401_pi300-10000_cl_pass0_src38 appears to have run properly
[Thu Aug 16 13:47:02 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu Aug 16 13:47:02 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Aug 16 13:47:02 2012] Fit fullrun_pn_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Thu Aug 16 15:09:52 2012] Spatial fit model total counts = 1383.620000, observed total counts = 1378.000000
[Thu Aug 16 15:09:52 2012] Offset between fit and detection position for source 38 = 9.489186 pixels
[Thu Aug 16 15:09:52 2012] 1509.992000 total counts/ 1290.960000 bgd. counts: snr = 6.096087
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 9.489186 pixels
  Position = (261.0, 221.6) = 6 48 11.85 70 9 28.5
  Extent = 18.5 (18.4-36.9)", rotation angle = 0
  Source counts = 219.0 +/- 38.9
  Background counts = 1291.0
  Rate = 0.004 +/- 0.0007
[Thu Aug 16 15:09:52 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 15:09:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 15:09:52 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 15:09:52 2012] Source does appear to be extended
[Thu Aug 16 15:09:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 15:10:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 16 15:10:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 15:10:12 2012] Initial guess for spatial extent in simple fitting = 18.47"
[Thu Aug 16 15:10:12 2012] source mask rpix=4.2, npix_max = 90, mask sum = 62, frac = 0.688
[Thu Aug 16 15:10:12 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 18.47"
[Thu Aug 16 16:16:37 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_src37.ximg exists
[Thu Aug 16 16:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_src37.csv
[Thu Aug 16 16:16:37 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Aug 16 16:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_src37.csv
[Thu Aug 16 16:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 16:16:37 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Aug 16 16:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Aug 16 16:16:37 2012] fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Aug 16 16:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Aug 16 16:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 17:37:38 2012] Source 38 is offset by -7.993839 and -5.134069 pixels which is larger than
2 X fitted extent = 2.145053 x 2.145053, not incorporating fit results
[Thu Aug 16 17:37:38 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 17:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 17:37:38 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 17:37:38 2012] Source does appear to be extended
[Thu Aug 16 17:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 17:37:59 2012] XMMSAS src. selection expression = ellipse(22662.046000, 19232.818000, 1107.936032, 1107.936032, 0.000000, X, Y)
[Thu Aug 16 17:37:59 2012] Writing source region out to fullrun_pn_xmm0551850401_pi300-10000_pass1_cl_src38_src.reg
[Thu Aug 16 17:37:59 2012] Extracting stamp from image fullrun_pn_xmm0551850401_pi300-10000_cl_sm2.00.img.gz, (197, 158) - (325, 285)
[Thu Aug 16 17:37:59 2012] XMMSAS bgd. selection expression = annulus(22662.046000, 19232.818000, 1846.560053, 3693.120106, X, Y) && !ellipse(24856.968800, 25742.313600, 4672.464134, 4672.464134, 0.000000, X, Y) && !ellipse(23946.359200, 19954.725000, 377.755211, 327.848809, 0.000000, X, Y) && !ellipse(25127.759552, 18455.405426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25621.300293, 14681.845474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23783.039800, 20855.611000, 365.877611, 365.877611, 0.000000, X, Y)
[Thu Aug 16 17:37:59 2012] Writing fullrun_pn_xmm0551850401_pi300-10000_pass1_cl_src38.gif
[Thu Aug 16 18:05:31 2012] Mean detx,y = (2517.49, -4877.17) 
[Thu Aug 16 18:05:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 18:06:09 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 18:06:10 2012] Setting source spectrum file to fullrun_pn_xmm0551850401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Aug 16 18:06:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551850401_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Aug 16 23:06:16 2012] Updating aperture counts using extracted products
[Thu Aug 16 23:06:16 2012] Error reading totcts from fullrun_pn_xmm0551850401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Aug 16 23:06:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 23:06:16 2012] Using photon index=1.80, rate=0.00409, arf fullrun_pn_xmm0551850401_pi300-10000_pass1_cl_src38.arf
[Thu Aug 16 23:06:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 23:06:16 2012] Updating source flux to 1.3e-14
[Thu Aug 16 23:08:33 2012] Flag b found in src. 38 procflags, skipping spectral fitting