[Thu Aug 16 12:31:09 2012] Detection parameters:
  Position = (287.0, 296.1) = 6 47 49.75 70 14 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3234.3 +/- 70.5
  Background counts = 66.4
  Rate = 0.05 +/- 0.001

[Thu Aug 16 12:31:10 2012] Off-axis axis estimate = 0.85'
[Thu Aug 16 14:24:24 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 14:24:24 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Thu Aug 16 14:24:24 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Thu Aug 16 14:24:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.85"
[Thu Aug 16 15:09:43 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 16 15:09:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 15:09:43 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 16 15:09:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 15:09:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 15:09:44 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 16 15:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 16 15:09:44 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 16 15:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 16 15:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 15:10:02 2012] Spatial fit model total counts = 7774.700000, observed total counts = 7030.000000
[Thu Aug 16 15:10:02 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 16 15:10:02 2012] Spatial fit model total counts = 2869.830000, observed total counts = 2331.000000
[Thu Aug 16 15:10:02 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 16 15:10:02 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.967152 pixels away
[Thu Aug 16 15:10:02 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 15:10:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 15:10:02 2012] Assessing source extent using major
[Thu Aug 16 15:10:02 2012] Source does appear to be extended
[Thu Aug 16 15:10:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 15:10:02 2012] Source is confused with source 17
[Thu Aug 16 16:50:09 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 16:50:09 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Thu Aug 16 16:50:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Thu Aug 16 16:50:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.85"
[Thu Aug 16 17:37:29 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 16 17:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 17:37:29 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 16 17:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 17:37:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 17:37:29 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 16 17:37:29 2012] fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 16 17:37:29 2012] Fit fullrun_mos2_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 16 17:37:48 2012] Spatial fit model total counts = 7558.490000, observed total counts = 7030.000000
[Thu Aug 16 17:37:48 2012] Offset between fit and detection position for source 2 = 0.300878 pixels
[Thu Aug 16 17:37:48 2012] 6136.320000 total counts/ 2028.100000 bgd. counts: snr = 91.223979
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.300878 pixels
  Position = (287.1, 296.4) = 6 47 49.66 70 14 53.8
  Extent = 13.7 (13.7-27.4)", rotation angle = 0
  Source counts = 4108.2 +/- 78.3
  Background counts = 2028.1
  Rate = 0.06 +/- 0.001
[Thu Aug 16 17:37:48 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 17:37:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 17:37:48 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 17:37:48 2012] Source does appear to be extended
[Thu Aug 16 17:37:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 22:13:11 2012] Counts = 4108.220000, rescaling region sizes by 2.000000
[Thu Aug 16 22:13:11 2012] XMMSAS src. selection expression = ellipse(24926.136140, 25734.951600, 1644.864047, 1644.864047, 0.000000, X, Y)
[Thu Aug 16 22:13:11 2012] Writing source region out to fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug 16 22:13:11 2012] Extracting stamp from image fullrun_mos2_xmm0551850401_pi300-10000_cl_sm2.00.img.gz, (193, 202) - (382, 391)
[Thu Aug 16 22:13:11 2012] XMMSAS bgd. selection expression = annulus(24926.136140, 25734.951600, 5482.880158, 10965.760316, X, Y) && !ellipse(23871.300000, 25612.673680, 976.720028, 976.720028, 0.000000, X, Y) && !ellipse(23951.916760, 19948.495400, 382.676011, 382.676011, 0.000000, X, Y) && !ellipse(25157.636000, 18460.247800, 353.380010, 353.380010, 0.000000, X, Y) && !ellipse(30946.712921, 34328.301605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22120.948166, 28737.909088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27842.713800, 24350.620000, 402.059212, 402.059212, 0.000000, X, Y) && !ellipse(33787.561060, 21077.888460, 463.767213, 463.767213, 0.000000, X, Y) && !ellipse(17166.788284, 26964.662811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23396.476013, 19691.215363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29268.742371, 34905.985535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23743.928973, 26011.986000, 1687.601991, 1643.599551, 103.984089, X, Y) && !ellipse(32063.763397, 23765.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24110.153198, 24520.137512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.135200, 14695.332400, 661.484019, 661.484019, 0.000000, X, Y) && !ellipse(31908.162750, 15194.035141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21229.289764, 37204.595734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.982086, 14740.003891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.156800, 20902.133800, 525.786415, 219.202406, 35.865000, X, Y) && !ellipse(23634.626831, 26886.581055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36220.997650, 20051.955521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27332.912000, 24805.700000, 1106.136032, 1106.136032, 0.000000, X, Y)
[Thu Aug 16 22:13:11 2012] Writing fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2.gif
[Thu Aug 16 22:13:19 2012] Mean detx,y = (222.60, -1530.79) 
[Thu Aug 16 22:13:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 22:16:46 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 22:16:46 2012] Setting source spectrum file to fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug 16 22:16:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug 16 23:06:17 2012] Updating aperture counts using extracted products
[Thu Aug 16 23:06:17 2012] Error reading totcts from fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug 16 23:06:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 23:06:18 2012] Using photon index=1.80, rate=0.0636, arf fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2.arf
[Thu Aug 16 23:06:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 23:06:18 2012] Updating source flux to 5.5e-13
[Thu Aug 16 23:07:09 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Thu Aug 16 23:07:09 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Aug 16 23:08:33 2012] Reading fit data from xmm0551850401/analysis//spectral/fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2_pl.csv
[Thu Aug 16 23:08:33 2012] Spectral fit parameter nH value = 1.5986e+21
[Thu Aug 16 23:08:33 2012] Spectral fit parameter PhoIndex value = 1.86546
[Thu Aug 16 23:08:33 2012] Failed to get F(0.3-8.0) from xmm0551850401/analysis//spectral/fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 23:08:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 23:08:33 2012] Using Nh = 1.6e+21, photon index=1.87, rate=0.0636, arf fullrun_mos2_xmm0551850401_pi300-10000_pass1_cl_src2.arf
[Thu Aug 16 23:08:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 23:08:33 2012] Updating source flux to 6.3e-13