[Thu Aug 16 12:30:43 2012] Detection parameters:
  Position = (286.3, 296.1) = 6 47 50.35 70 14 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3041.4 +/- 68.5
  Background counts = 69.2
  Rate = 0.05 +/- 0.001

[Thu Aug 16 12:30:44 2012] Off-axis axis estimate = 0.90'
[Thu Aug 16 13:47:02 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 13:47:02 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Thu Aug 16 13:47:02 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.923
[Thu Aug 16 13:47:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.88"
[Thu Aug 16 14:24:23 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 16 14:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 14:24:23 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 16 14:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 14:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 14:24:23 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 16 14:24:23 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 16 14:24:23 2012] Fit fullrun_mos1_xmm0551850401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 16 15:09:57 2012] Spatial fit model total counts = 7061.120000, observed total counts = 7041.000000
[Thu Aug 16 15:09:57 2012] Offset between fit and detection position for source 3 = 0.715697 pixels
[Thu Aug 16 15:09:57 2012] 7025.430000 total counts/ 3066.420000 bgd. counts: snr = 71.494195
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.715697 pixels
  Position = (286.7, 296.6) = 6 47 50.00 70 14 55.0
  Extent = 13.8 (13.7-27.5)", rotation angle = 0
  Source counts = 3959.0 +/- 83.8
  Background counts = 3066.4
  Rate = 0.06 +/- 0.001
[Thu Aug 16 15:09:57 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 15:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 15:09:57 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 15:09:57 2012] Source does appear to be extended
[Thu Aug 16 15:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 16:16:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 16 16:16:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 16:16:37 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Thu Aug 16 16:16:37 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.913
[Thu Aug 16 16:16:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.76"
[Thu Aug 16 16:50:08 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 16 16:50:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 16:50:08 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 16 16:50:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 16:50:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 16:50:08 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 16 16:50:08 2012] fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 16 16:50:08 2012] Fit fullrun_mos1_xmm0551850401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 16 17:37:43 2012] Warning, spatial fit 1 centroid is now closest to src. 11
[Thu Aug 16 17:37:43 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 17:37:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 17:37:43 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 17:37:43 2012] Source does appear to be extended
[Thu Aug 16 17:37:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 21:25:10 2012] Counts = 3959.010000, rescaling region sizes by 2.000000
[Thu Aug 16 21:25:10 2012] XMMSAS src. selection expression = ellipse(24891.192800, 25759.966400, 1650.852048, 1650.852048, 0.000000, X, Y)
[Thu Aug 16 21:25:10 2012] Writing source region out to fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug 16 21:25:10 2012] Extracting stamp from image fullrun_mos1_xmm0551850401_pi300-10000_cl_sm2.00.img.gz, (192, 202) - (382, 392)
[Thu Aug 16 21:25:10 2012] XMMSAS bgd. selection expression = annulus(24891.192800, 25759.966400, 5502.840158, 11005.680317, X, Y) && !ellipse(23663.066000, 19927.268400, 1477.152043, 1477.152043, 0.000000, X, Y) && !ellipse(25641.025600, 14686.211400, 603.341617, 427.279212, 335.568400, X, Y) && !ellipse(25152.485200, 18455.135400, 486.370414, 335.044010, 332.337900, X, Y) && !ellipse(27832.945400, 24378.118800, 313.451209, 313.451209, 0.000000, X, Y) && !ellipse(22115.204200, 28745.717000, 388.594411, 388.594411, 0.000000, X, Y) && !ellipse(33726.958710, 21091.947754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17146.619200, 26984.131200, 431.742412, 431.742412, 0.000000, X, Y) && !ellipse(32029.784332, 23756.540466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23379.226288, 19683.122833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.660000, 26946.728000, 1199.632035, 1199.632035, 0.000000, X, Y) && !ellipse(26867.350000, 24725.404000, 1086.192031, 1086.192031, 0.000000, X, Y) && !ellipse(14613.202347, 22446.989746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36204.740906, 20145.232010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30980.811462, 34328.150269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20160.749000, 27314.474800, 584.913894, 584.913894, 0.000000, X, Y)
[Thu Aug 16 21:25:10 2012] Writing fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3.gif
[Thu Aug 16 21:25:17 2012] Mean detx,y = (-1311.58, -348.03) 
[Thu Aug 16 21:25:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 21:27:56 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 21:27:56 2012] Setting source spectrum file to fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 21:27:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug 16 23:06:16 2012] Updating aperture counts using extracted products
[Thu Aug 16 23:06:16 2012] Error reading totcts from fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 23:06:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 23:06:17 2012] Using photon index=1.80, rate=0.0608, arf fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3.arf
[Thu Aug 16 23:06:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 23:06:17 2012] Updating source flux to 5.3e-13
[Thu Aug 16 23:07:09 2012] Reading fit data from xmm0551850401/analysis//spectral/fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3_pl.csv
[Thu Aug 16 23:07:09 2012] Spectral fit parameter nH value = 1.26082e+21
[Thu Aug 16 23:07:09 2012] Spectral fit parameter PhoIndex value = 1.79469
[Thu Aug 16 23:07:09 2012] Failed to get F(0.3-8.0) from xmm0551850401/analysis//spectral/fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 23:07:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 23:07:09 2012] Using Nh = 1.3e+21, photon index=1.79, rate=0.0608, arf fullrun_mos1_xmm0551850401_pi300-10000_pass1_cl_src3.arf
[Thu Aug 16 23:07:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 23:07:09 2012] Updating source flux to 6e-13