[Sat Dec 17 23:17:00 2011] Detection parameters:
  Position = (247.8, 326.1) = 2 57 21.11 -23 24 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4277.2 +/- 81.2
  Background counts = 351.6
  Rate = 0.06 +/- 0.001

[Sat Dec 17 23:17:03 2011] Off-axis axis estimate = 4.19'
[Sat Dec 17 23:27:04 2011] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 23:27:04 2011] Initial guess for spatial extent in simple fitting = 8.52"
[Sat Dec 17 23:27:04 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.034
[Sat Dec 17 23:27:04 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 8.52"
[Sun Dec 18 00:46:25 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Dec 18 00:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src5.csv
[Sun Dec 18 00:46:25 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Dec 18 00:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src5.csv
[Sun Dec 18 00:46:25 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Dec 18 00:46:26 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Dec 18 03:26:48 2011] Spatial fit model total counts = 3239.000000, observed total counts = 3239.000000
[Sun Dec 18 03:26:48 2011] Offset between fit and detection position for source 6 = 0.233112 pixels
[Sun Dec 18 03:26:48 2011] 3198.610000 total counts/ 1149.940000 bgd. counts: snr = 60.413558
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.233112 pixels
  Position = (247.6, 326.0) = 2 57 21.18 -23 24 20.1
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2048.7 +/- 56.6
  Background counts = 1149.9
  Rate = 0.05 +/- 0.001
[Sun Dec 18 03:26:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:26:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:26:48 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 03:26:48 2011] Source does appear to be extended
[Sun Dec 18 03:26:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 03:27:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:27:32 2011] Initial guess for spatial extent in simple fitting = 5.57"
[Sun Dec 18 03:27:32 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.948
[Sun Dec 18 03:27:32 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 5.57"
[Sun Dec 18 05:47:51 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Dec 18 05:47:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src5.csv
[Sun Dec 18 05:47:51 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Dec 18 05:47:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src5.csv
[Sun Dec 18 05:47:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Dec 18 05:47:52 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Dec 18 09:32:46 2011] Spatial fit model total counts = 3239.000000, observed total counts = 3239.000000
[Sun Dec 18 09:32:46 2011] Offset between fit and detection position for source 6 = 0.000218 pixels
[Sun Dec 18 09:32:46 2011] 3198.600000 total counts/ 1150.510000 bgd. counts: snr = 60.381492
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000218 pixels
  Position = (247.6, 326.0) = 2 57 21.18 -23 24 20.1
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2048.1 +/- 56.6
  Background counts = 1150.5
  Rate = 0.05 +/- 0.001
[Sun Dec 18 09:32:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:32:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:32:46 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:32:46 2011] Source does appear to be extended
[Sun Dec 18 09:32:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:33:28 2011] Counts = 2048.090000, rescaling region sizes by 2.000000
[Sun Dec 18 09:33:28 2011] XMMSAS src. selection expression = ellipse(21489.333200, 28314.349600, 667.376419, 667.376419, 0.000000, X, Y)
[Sun Dec 18 09:33:28 2011] Writing source region out to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src6_src.reg
[Sun Dec 18 09:33:28 2011] Extracting stamp from image fullrun_pn_xmm0551850201_pi300-10000_cl_sm2.00.img.gz, (209, 288) - (286, 364)
[Sun Dec 18 09:33:28 2011] XMMSAS bgd. selection expression = annulus(21489.333200, 28314.349600, 2224.588064, 4449.176128, X, Y) && !ellipse(24929.988140, 26168.720000, 1095.584032, 916.896026, 188.434020, X, Y) && !ellipse(25296.057200, 32081.124000, 418.155212, 418.155212, 0.000000, X, Y) && !ellipse(22539.379456, 28305.168518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15589.199600, 27716.638000, 1726.912050, 1726.912050, 0.000000, X, Y) && !ellipse(25715.662689, 27749.919586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26840.542190, 26538.218929, 1600.420129, 554.433270, 125.954162, X, Y) && !ellipse(17438.864600, 24943.557600, 453.013613, 453.013613, 0.000000, X, Y) && !ellipse(26157.309400, 24350.382000, 1104.408032, 577.448817, 90.000000, X, Y)
[Sun Dec 18 09:33:28 2011] Writing fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src6.gif
[Sun Dec 18 09:50:10 2011] Mean detx,y = (3962.57, 2154.16) 
[Sun Dec 18 09:50:16 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 09:51:21 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 09:51:21 2011] Setting source spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Dec 18 09:51:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Dec 18 16:04:14 2011] Updating aperture counts using extracted products
[Sun Dec 18 16:04:14 2011] Error reading totcts from fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Dec 18 16:04:17 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 16:04:17 2011] Using photon index=1.80, rate=0.046, arf fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src6.arf
[Sun Dec 18 16:04:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 16:04:17 2011] Updating source flux to 1.3e-13