[Sat Dec 17 23:17:03 2011] Detection parameters:
  Position = (127.2, 167.3) = 2 57 59.28 -23 35 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.1 +/- 24.6
  Background counts = 216.4
  Rate = 0.002 +/- 0.0002

[Sat Dec 17 23:17:03 2011] Off-axis axis estimate = 15.64'
[Sat Dec 17 23:27:04 2011] Using EEF radius (= 14.25 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 23:27:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 23:27:04 2011] Initial guess for spatial extent in simple fitting = 14.25"
[Sat Dec 17 23:27:04 2011] source mask rpix=3.3, npix_max = 57, mask sum = 48, frac = 0.842
[Sat Dec 17 23:27:04 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 14.25"
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src43.ximg exists
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Dec 18 00:46:26 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src43 appears to have run properly
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Dec 18 00:46:26 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sun Dec 18 03:26:48 2011] Spatial fit model total counts = 701.089000, observed total counts = 730.000000
[Sun Dec 18 03:26:48 2011] Offset between fit and detection position for source 48 = 7.783558 pixels
[Sun Dec 18 03:26:48 2011] 732.617392 total counts/ 0.388392 bgd. counts: snr = 1174.929443
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 7.783558 pixels
  Position = (121.9, 173.0) = 2 58 0.95 -23 35 25.0
  Extent = 28.5 (27.1-57.0)" x 21.2 (17.7-23.1)", rotation angle = 242 (231-253) degrees
  Source counts = 732.2 +/- 27.1
  Background counts = 0.4
  Rate = 0.02 +/- 0.0006
[Sun Dec 18 03:26:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:26:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:26:48 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 03:26:48 2011] Source does appear to be extended
[Sun Dec 18 03:26:48 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Sun Dec 18 03:27:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:27:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 03:27:32 2011] Initial guess for spatial extent in simple fitting = 24.83"
[Sun Dec 18 03:27:32 2011] source mask rpix=5.7, npix_max = 154, mask sum = 130, frac = 0.843
[Sun Dec 18 03:27:32 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 24.83"
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src42.ximg exists
[Sun Dec 18 05:47:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src42.csv
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src42_1.ximg exists
[Sun Dec 18 05:47:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src42.csv
[Sun Dec 18 05:47:52 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 05:47:53 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sun Dec 18 05:47:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sun Dec 18 05:47:53 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sun Dec 18 05:47:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sun Dec 18 05:47:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 09:32:46 2011] Warning, spatial fit 42 centroid is now closest to src. 41
[Sun Dec 18 09:32:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:32:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:32:46 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:32:46 2011] Source does appear to be extended
[Sun Dec 18 09:32:46 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Sun Dec 18 09:33:30 2011] XMMSAS src. selection expression = ellipse(10560.946000, 15005.850000, 1709.580049, 1270.218037, 242.168000, X, Y)
[Sun Dec 18 09:33:30 2011] Writing source region out to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src48_src.reg
[Sun Dec 18 09:33:30 2011] Extracting stamp from image fullrun_pn_xmm0551850201_pi300-10000_cl_sm2.00.img.gz, (24, 75) - (220, 271)
[Sun Dec 18 09:33:30 2011] XMMSAS bgd. selection expression = annulus(10560.946000, 15005.850000, 2849.300082, 5698.600164, X, Y) && !ellipse(8939.429298, 19625.837921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10010.675400, 19022.079000, 541.152816, 422.356812, 255.409000, X, Y) && !ellipse(15598.578600, 17393.764800, 339.528010, 339.528010, 0.000000, X, Y)
[Sun Dec 18 09:33:30 2011] Writing fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src48.gif
[Sun Dec 18 10:40:02 2011] Mean detx,y = (9356.35, -13658.56) 
[Sun Dec 18 10:40:08 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 10:42:04 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 10:42:05 2011] Setting source spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Dec 18 10:42:05 2011] Setting bgd. spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun Dec 18 16:04:17 2011] Updating aperture counts using extracted products
[Sun Dec 18 16:04:17 2011] Error reading totcts from fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Dec 18 16:04:20 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 16:04:20 2011] Using photon index=1.80, rate=0.0164, arf fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src48.arf
[Sun Dec 18 16:04:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 16:04:20 2011] Updating source flux to 1.2e-13