[Sat Dec 17 23:17:02 2011] Detection parameters:
  Position = (294.2, 257.7) = 2 57 6.44 -23 29 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.0 +/- 20.4
  Background counts = 341.4
  Rate = 0.004 +/- 0.0004

[Sat Dec 17 23:17:03 2011] Off-axis axis estimate = 2.97'
[Sat Dec 17 23:27:04 2011] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 23:27:04 2011] Initial guess for spatial extent in simple fitting = 7.91"
[Sat Dec 17 23:27:04 2011] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.651
[Sat Dec 17 23:27:04 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 7.91"
[Sun Dec 18 00:46:25 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src30.ximg exists
[Sun Dec 18 00:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src30.csv
[Sun Dec 18 00:46:25 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Dec 18 00:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src30.csv
[Sun Dec 18 00:46:25 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Dec 18 00:46:26 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Dec 18 03:26:48 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 11.380270 pixels away
[Sun Dec 18 03:26:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:26:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:26:48 2011] Assessing source extent using major
[Sun Dec 18 03:26:48 2011] Source does appear to be extended
[Sun Dec 18 03:26:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 03:27:32 2011] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:27:32 2011] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Dec 18 03:27:32 2011] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.651
[Sun Dec 18 03:27:32 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 7.91"
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src29.ximg exists
[Sun Dec 18 05:47:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src29.csv
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Dec 18 05:47:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src29.csv
[Sun Dec 18 05:47:52 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 05:47:53 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Dec 18 05:47:53 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Dec 18 05:47:53 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Dec 18 09:32:46 2011] Spatial fit model total counts = 626.244000, observed total counts = 687.000000
[Sun Dec 18 09:32:46 2011] Offset between fit and detection position for source 35 = 1.152590 pixels
[Sun Dec 18 09:32:46 2011] 585.905000 total counts/ 481.604000 bgd. counts: snr = 4.752733
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.152590 pixels
  Position = (293.1, 257.5) = 2 57 6.80 -23 29 18.1
  Extent = 4.8 (4.3-5.6)", rotation angle = 0
  Source counts = 104.3 +/- 24.2
  Background counts = 481.6
  Rate = 0.002 +/- 0.0005
[Sun Dec 18 09:32:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:32:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:32:46 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:32:46 2011] Source does appear to be extended
[Sun Dec 18 09:32:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:33:29 2011] XMMSAS src. selection expression = ellipse(25447.292200, 22356.139600, 285.752408, 285.752408, 0.000000, X, Y)
[Sun Dec 18 09:33:29 2011] Writing source region out to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src35_src.reg
[Sun Dec 18 09:33:29 2011] Extracting stamp from image fullrun_pn_xmm0551850201_pi300-10000_cl_sm2.00.img.gz, (277, 241) - (309, 274)
[Sun Dec 18 09:33:29 2011] XMMSAS bgd. selection expression = annulus(25447.292200, 22356.139600, 476.254014, 952.508027, X, Y) && !ellipse(26157.309400, 24350.382000, 1104.408032, 577.448817, 90.000000, X, Y)
[Sun Dec 18 09:33:29 2011] Writing fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src35.gif
[Sun Dec 18 10:22:28 2011] Mean detx,y = (-1845.65, -2015.26) 
[Sun Dec 18 10:22:34 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 10:23:12 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 10:23:12 2011] Setting source spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Dec 18 10:23:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Dec 18 16:04:16 2011] Updating aperture counts using extracted products
[Sun Dec 18 16:04:16 2011] Error reading totcts from fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Dec 18 16:04:19 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 16:04:19 2011] Using photon index=1.80, rate=0.00234, arf fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src35.arf
[Sun Dec 18 16:04:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 16:04:19 2011] Updating source flux to 1.2e-14