[Sat Dec 17 23:17:01 2011] Detection parameters:
  Position = (180.8, 324.1) = 2 57 42.27 -23 24 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 240.0 +/- 29.1
  Background counts = 296.3
  Rate = 0.004 +/- 0.0005

[Sat Dec 17 23:17:03 2011] Off-axis axis estimate = 8.73'
[Sat Dec 17 23:27:04 2011] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 23:27:04 2011] Initial guess for spatial extent in simple fitting = 10.79"
[Sat Dec 17 23:27:04 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Sat Dec 17 23:27:04 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 10.79"
[Sun Dec 18 00:46:25 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src15.ximg exists
[Sun Dec 18 00:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src15.csv
[Sun Dec 18 00:46:25 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Dec 18 00:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src15.csv
[Sun Dec 18 00:46:25 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Dec 18 00:46:26 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Dec 18 00:46:26 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Dec 18 03:26:48 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.015969 pixels away
[Sun Dec 18 03:26:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:26:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:26:48 2011] Assessing source extent using major
[Sun Dec 18 03:26:48 2011] Source does appear to be extended
[Sun Dec 18 03:26:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 03:27:32 2011] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:27:32 2011] Initial guess for spatial extent in simple fitting = 10.79"
[Sun Dec 18 03:27:32 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Sun Dec 18 03:27:32 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 10.79"
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src15.ximg exists
[Sun Dec 18 05:47:52 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src15.csv
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Dec 18 05:47:52 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src15.csv
[Sun Dec 18 05:47:52 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Dec 18 05:47:52 2011] fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Dec 18 05:47:52 2011] Fit fullrun_pn_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Dec 18 09:32:46 2011] Spatial fit model total counts = 1420.000000, observed total counts = 1420.000000
[Sun Dec 18 09:32:46 2011] Offset between fit and detection position for source 20 = 5.121133 pixels
[Sun Dec 18 09:32:46 2011] 1458.108000 total counts/ 822.583000 bgd. counts: snr = 22.158623
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 5.121133 pixels
  Position = (179.7, 319.1) = 2 57 42.61 -23 24 49.8
  Extent = 21.6 (21.5-43.2)", rotation angle = 0
  Source counts = 635.5 +/- 38.2
  Background counts = 822.6
  Rate = 0.01 +/- 0.0009
[Sun Dec 18 09:32:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:32:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:32:46 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:32:46 2011] Source does appear to be extended
[Sun Dec 18 09:32:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:32:46 2011] Source is confused with source 3
[Sun Dec 18 09:33:29 2011] XMMSAS src. selection expression = ellipse(15589.199600, 27716.638000, 1295.184037, 1295.184037, 0.000000, X, Y)
[Sun Dec 18 09:33:29 2011] Writing source region out to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src20_src.reg
[Sun Dec 18 09:33:29 2011] Extracting stamp from image fullrun_pn_xmm0551850201_pi300-10000_cl_sm2.00.img.gz, (105, 245) - (254, 394)
[Sun Dec 18 09:33:29 2011] XMMSAS bgd. selection expression = annulus(15589.199600, 27716.638000, 2158.640062, 4317.280124, X, Y) && !ellipse(15922.560577, 27353.526367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12262.001328, 31823.212433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13683.453000, 26864.276260, 464.863213, 464.863213, 0.000000, X, Y) && !ellipse(15078.323654, 25801.417480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17438.864600, 24943.557600, 453.013613, 453.013613, 0.000000, X, Y)
[Sun Dec 18 09:33:29 2011] Writing fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src20.gif
[Sun Dec 18 10:06:10 2011] Mean detx,y = (9219.23, -497.43) 
[Sun Dec 18 10:06:19 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 10:07:58 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 10:07:59 2011] Setting source spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Dec 18 10:07:59 2011] Setting bgd. spectrum file to fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Dec 18 16:04:15 2011] Updating aperture counts using extracted products
[Sun Dec 18 16:04:15 2011] Error reading totcts from fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Dec 18 16:04:17 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 16:04:17 2011] Using photon index=1.80, rate=0.0143, arf fullrun_pn_xmm0551850201_pi300-10000_pass1_cl_src20.arf
[Sun Dec 18 16:04:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 16:04:17 2011] Updating source flux to 5e-14
[Sun Dec 18 16:12:12 2011] Flag c found in src. 20 procflags, skipping spectral fitting