[Sat Dec 17 23:18:19 2011] Detection parameters:
  Position = (183.2, 309.7) = 2 57 41.51 -23 25 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2330.7 +/- 60.1
  Background counts = 173.4
  Rate = 0.04 +/- 0.0009

[Sat Dec 17 23:18:21 2011] Off-axis axis estimate = 8.39'
[Sun Dec 18 01:31:28 2011] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 01:31:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 01:31:28 2011] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Dec 18 01:31:28 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.040
[Sun Dec 18 01:31:28 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.62"
[Sun Dec 18 03:26:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 18 03:26:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 18 03:26:33 2011] Fit fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun Dec 18 03:26:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 18 03:26:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 18 03:26:33 2011] Fit fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 03:27:07 2011] Spatial fit model total counts = 2411.270000, observed total counts = 2410.000000
[Sun Dec 18 03:27:07 2011] Offset between fit and detection position for source 3 = 0.101534 pixels
[Sun Dec 18 03:27:07 2011] 2394.730000 total counts/ 1010.830000 bgd. counts: snr = 43.527693
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.101534 pixels
  Position = (183.3, 309.6) = 2 57 41.50 -23 25 31.1
  Extent = 6.0" x 4.9", rotation angle = 72
  Source counts = 1383.9 +/- 48.9
  Background counts = 1010.8
  Rate = 0.02 +/- 0.0006
[Sun Dec 18 03:27:07 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:27:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:27:07 2011] Assessing source extent using major
[Sun Dec 18 03:27:07 2011] Source does appear to be extended
[Sun Dec 18 03:27:07 2011] Computing asymmetry using major and minor axis, asym = 1.21
[Sun Dec 18 07:34:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 07:34:23 2011] Initial guess for spatial extent in simple fitting = 5.47"
[Sun Dec 18 07:34:23 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.729
[Sun Dec 18 07:34:23 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.47"
[Sun Dec 18 09:32:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 18 09:32:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 09:32:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 18 09:32:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 09:32:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 09:32:34 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 18 09:32:34 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 18 09:32:34 2011] Fit fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 18 09:33:06 2011] Spatial fit model total counts = 2405.000000, observed total counts = 2405.000000
[Sun Dec 18 09:33:06 2011] Offset between fit and detection position for source 3 = 0.038268 pixels
[Sun Dec 18 09:33:06 2011] 2386.900000 total counts/ 975.950000 bgd. counts: snr = 45.164566
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.038268 pixels
  Position = (183.3, 309.6) = 2 57 41.49 -23 25 31.3
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source counts = 1411.0 +/- 48.9
  Background counts = 976.0
  Rate = 0.02 +/- 0.0006
[Sun Dec 18 09:33:06 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:33:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:33:06 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:33:06 2011] Source does appear to be extended
[Sun Dec 18 09:33:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 14:14:15 2011] Counts = 1410.950000, rescaling region sizes by 2.000000
[Sun Dec 18 14:14:15 2011] XMMSAS src. selection expression = ellipse(15897.281800, 26887.179200, 670.802419, 670.802419, 0.000000, X, Y)
[Sun Dec 18 14:14:15 2011] Writing source region out to fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 14:14:15 2011] Extracting stamp from image fullrun_mos2_xmm0551850201_pi300-10000_cl_sm2.00.img.gz, (145, 271) - (222, 348)
[Sun Dec 18 14:14:15 2011] XMMSAS bgd. selection expression = annulus(15897.281800, 26887.179200, 2236.008064, 4472.016129, X, Y) && !ellipse(13659.174652, 26834.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17453.053940, 24922.301600, 382.188011, 291.015208, 90.000000, X, Y) && !ellipse(11263.849701, 31637.323212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17933.884200, 29122.675800, 420.828012, 420.828012, 0.000000, X, Y)
[Sun Dec 18 14:14:15 2011] Writing fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 14:23:01 2011] Mean detx,y = (-8504.73, 1093.40) 
[Sun Dec 18 14:23:03 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 14:23:39 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 14:23:40 2011] Setting source spectrum file to fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 14:23:40 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 16:04:25 2011] Updating aperture counts using extracted products
[Sun Dec 18 16:04:25 2011] Error reading totcts from fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 16:04:29 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 16:04:29 2011] Using photon index=1.80, rate=0.0172, arf fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 16:04:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 16:04:29 2011] Updating source flux to 2.5e-13