[Sat Dec 17 23:18:20 2011] Detection parameters:
  Position = (266.7, 307.9) = 2 57 15.13 -23 25 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.9 +/- 23.9
  Background counts = 204.5
  Rate = 0.001 +/- 0.0002

[Sat Dec 17 23:18:21 2011] Off-axis axis estimate = 2.40'
[Sun Dec 18 01:31:28 2011] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 01:31:28 2011] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Dec 18 01:31:28 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.984
[Sun Dec 18 01:31:28 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 7.63"
[Sun Dec 18 03:26:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src37.ximg exists
[Sun Dec 18 03:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src37.csv
[Sun Dec 18 03:26:33 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Dec 18 03:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src37.csv
[Sun Dec 18 03:26:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 03:26:34 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Dec 18 03:26:34 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Dec 18 03:26:34 2011] Fit fullrun_mos2_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Dec 18 03:27:07 2011] Spatial fit model total counts = 3884.100000, observed total counts = 3899.000000
[Sun Dec 18 03:27:07 2011] Offset between fit and detection position for source 26 = 5.322342 pixels
[Sun Dec 18 03:27:07 2011] Warning, changing simple spatial fit ID from 37 to 7
[Sun Dec 18 03:27:07 2011] 3949.410000 total counts/ 2573.370000 bgd. counts: snr = 27.125637
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.322342 pixels
  Position = (268.6, 312.9) = 2 57 14.54 -23 25 17.1
  Extent = 25.0" x 21.7", rotation angle = 106
  Source counts = 1376.0 +/- 62.8
  Background counts = 2573.4
  Rate = 0.02 +/- 0.0008
[Sun Dec 18 03:27:07 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:27:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:27:07 2011] Assessing source extent using major
[Sun Dec 18 03:27:07 2011] Source does appear to be extended
[Sun Dec 18 03:27:07 2011] Computing asymmetry using major and minor axis, asym = 1.15
[Sun Dec 18 03:27:07 2011] Source is confused with source 7
[Sun Dec 18 07:34:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 07:34:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 07:34:23 2011] Initial guess for spatial extent in simple fitting = 23.35"
[Sun Dec 18 07:34:23 2011] source mask rpix=5.4, npix_max = 137, mask sum = 132, frac = 0.958
[Sun Dec 18 07:34:23 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 23.35"
[Sun Dec 18 09:32:34 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src37.ximg exists
[Sun Dec 18 09:32:34 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Dec 18 09:32:34 2011] Fit fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_src37 appears to have run properly
[Sun Dec 18 09:32:35 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Dec 18 09:32:35 2011] fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Dec 18 09:32:35 2011] Fit fullrun_mos2_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sun Dec 18 09:33:06 2011] Warning, spatial fit 37 centroid is now closest to src. 22
[Sun Dec 18 09:33:06 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:33:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:33:06 2011] Assessing source extent using major
[Sun Dec 18 09:33:06 2011] Source does appear to be extended
[Sun Dec 18 09:33:06 2011] Computing asymmetry using major and minor axis, asym = 1.15
[Sun Dec 18 14:14:15 2011] Counts = 1376.040000, rescaling region sizes by 2.000000
[Sun Dec 18 14:14:15 2011] XMMSAS src. selection expression = ellipse(23316.152000, 27174.524000, 2997.084086, 2606.916075, 106.203199, X, Y)
[Sun Dec 18 14:14:15 2011] Writing source region out to fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src26_src.reg
[Sun Dec 18 14:14:15 2011] Extracting stamp from image fullrun_mos2_xmm0551850201_pi300-10000_cl_sm2.00.img.gz, (96, 141) - (441, 485)
[Sun Dec 18 14:14:15 2011] XMMSAS bgd. selection expression = annulus(23316.152000, 27174.524000, 9990.280287, 19980.560575, X, Y) && !ellipse(24913.832600, 26145.213400, 1352.096039, 1352.096039, 0.000000, X, Y) && !ellipse(28320.824000, 20149.448000, 343.993610, 343.993610, 0.000000, X, Y) && !ellipse(15897.281800, 26887.179200, 447.201613, 447.201613, 0.000000, X, Y) && !ellipse(21511.487280, 28309.035400, 423.276812, 382.417611, 359.493404, X, Y) && !ellipse(24335.963600, 19748.978000, 380.480011, 242.759207, 351.299770, X, Y) && !ellipse(22758.129360, 35007.416400, 521.426415, 319.192809, 342.107415, X, Y) && !ellipse(23814.188200, 26508.063800, 886.176025, 886.176025, 0.000000, X, Y) && !ellipse(21906.833000, 11929.022400, 485.406414, 485.406414, 0.000000, X, Y) && !ellipse(35682.010773, 24682.248291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15550.279400, 35637.555600, 410.288812, 410.288812, 0.000000, X, Y) && !ellipse(23766.103882, 25822.432037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13659.174652, 26834.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31300.410614, 25312.759338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15664.382874, 34095.952026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18516.868028, 33881.072410, 530.633908, 311.937655, 0.000000, X, Y) && !ellipse(17453.053940, 24922.301600, 382.188011, 291.015208, 90.000000, X, Y) && !ellipse(30272.385000, 27628.668600, 277.387208, 277.387208, 0.000000, X, Y) && !ellipse(28072.704773, 24176.611237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27017.037820, 19845.631400, 297.158409, 297.158409, 0.000000, X, Y) && !ellipse(15658.284200, 17381.083200, 572.540016, 572.540016, 0.000000, X, Y) && !ellipse(29497.238600, 34515.201800, 321.896009, 321.896009, 0.000000, X, Y) && !ellipse(22628.593200, 28321.058600, 313.262409, 313.262409, 0.000000, X, Y) && !ellipse(26468.814850, 26742.551025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11263.849701, 31637.323212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37962.911926, 19975.061890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12429.426147, 33613.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17933.884200, 29122.675800, 420.828012, 420.828012, 0.000000, X, Y) && !ellipse(10485.569820, 33925.336600, 349.540810, 349.540810, 0.000000, X, Y) && !ellipse(38343.799774, 27146.046448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.625458, 20599.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33997.405304, 18115.217850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19579.179764, 9084.644798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15215.115800, 37165.667800, 1169.128034, 1169.128034, 0.000000, X, Y) && !ellipse(26005.573303, 24607.278229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31465.518921, 37134.943695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40318.288307, 20318.886766, 2059.192059, 672.311336, 114.597703, X, Y) && !ellipse(26757.615662, 25785.959900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33917.470200, 36408.243800, 434.724013, 434.724013, 0.000000, X, Y) && !ellipse(25294.566000, 27216.070000, 1150.856033, 1150.856033, 0.000000, X, Y) && !ellipse(26593.487061, 25329.355927, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 14:14:15 2011] Writing fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src26.gif
[Sun Dec 18 14:39:32 2011] Mean detx,y = (-898.58, -1703.63) 
[Sun Dec 18 14:39:36 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 14:51:13 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 14:51:13 2011] Setting source spectrum file to fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Dec 18 14:51:13 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Dec 18 16:04:28 2011] Updating aperture counts using extracted products
[Sun Dec 18 16:04:28 2011] Error reading totcts from fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Dec 18 16:04:30 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 16:04:30 2011] Using photon index=1.80, rate=0.0168, arf fullrun_mos2_xmm0551850201_pi300-10000_pass1_cl_src26.arf
[Sun Dec 18 16:04:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 16:04:30 2011] Updating source flux to 1.4e-13
[Sun Dec 18 16:07:49 2011] Flag c found in src. 26 procflags, skipping spectral fitting