[Sat Dec 17 23:17:40 2011] Detection parameters:
  Position = (301.9, 305.0) = 2 57 4.02 -23 25 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 270.5 +/- 31.6
  Background counts = 221.0
  Rate = 0.003 +/- 0.0003

[Sat Dec 17 23:17:41 2011] Off-axis axis estimate = 0.54'
[Sun Dec 18 00:46:26 2011] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 00:46:26 2011] Initial guess for spatial extent in simple fitting = 6.70"
[Sun Dec 18 00:46:26 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.962
[Sun Dec 18 00:46:26 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 6.70"
[Sun Dec 18 01:31:27 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_src14.ximg exists
[Sun Dec 18 01:31:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_src14.csv
[Sun Dec 18 01:31:27 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Dec 18 01:31:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_src14.csv
[Sun Dec 18 01:31:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 01:31:27 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Dec 18 01:31:27 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Dec 18 01:31:27 2011] Fit fullrun_mos1_xmm0551850201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Dec 18 03:26:56 2011] Source 19 is offset by 6.019581 and 3.555714 pixels which is larger than
2 X fitted extent = 5.669104 x 5.669104, not incorporating fit results
[Sun Dec 18 03:26:56 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:26:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:26:56 2011] Assessing source extent using major
[Sun Dec 18 03:26:56 2011] Source does appear to be extended
[Sun Dec 18 03:26:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 05:47:53 2011] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 05:47:53 2011] Initial guess for spatial extent in simple fitting = 6.70"
[Sun Dec 18 05:47:53 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.962
[Sun Dec 18 05:47:53 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 6.70"
[Sun Dec 18 07:34:23 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_src14.ximg exists
[Sun Dec 18 07:34:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_src14.csv
[Sun Dec 18 07:34:23 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Dec 18 07:34:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_src14.csv
[Sun Dec 18 07:34:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 07:34:23 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Dec 18 07:34:23 2011] fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Dec 18 07:34:23 2011] Fit fullrun_mos1_xmm0551850201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Dec 18 09:32:55 2011] Spatial fit model total counts = 3151.910000, observed total counts = 3148.000000
[Sun Dec 18 09:32:55 2011] Offset between fit and detection position for source 19 = 7.067890 pixels
[Sun Dec 18 09:32:55 2011] 3047.768000 total counts/ 2576.710000 bgd. counts: snr = 9.279864
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 7.067890 pixels
  Position = (295.8, 301.3) = 2 57 5.92 -23 26 7.7
  Extent = 13.3 (13.2-13.4)", rotation angle = 0
  Source counts = 471.1 +/- 55.2
  Background counts = 2576.7
  Rate = 0.006 +/- 0.0007
[Sun Dec 18 09:32:55 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:32:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:32:55 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:32:55 2011] Source does appear to be extended
[Sun Dec 18 09:32:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:32:55 2011] Source is confused with source 2
[Sun Dec 18 12:34:21 2011] XMMSAS src. selection expression = ellipse(25689.740000, 26164.450000, 799.176023, 799.176023, 0.000000, X, Y)
[Sun Dec 18 12:34:21 2011] Writing source region out to fullrun_mos1_xmm0551850201_pi300-10000_pass1_cl_src19_src.reg
[Sun Dec 18 12:34:21 2011] Extracting stamp from image fullrun_mos1_xmm0551850201_pi300-10000_cl_sm2.00.img.gz, (250, 255) - (342, 347)
[Sun Dec 18 12:34:21 2011] XMMSAS bgd. selection expression = annulus(25689.740000, 26164.450000, 1331.960038, 2663.920077, X, Y) && !ellipse(24909.592400, 26174.127800, 1442.136041, 1229.088035, 8.708792, X, Y) && !ellipse(28097.749800, 24184.000000, 350.986410, 350.986410, 0.000000, X, Y) && !ellipse(26968.710000, 27662.682000, 1124.784032, 1124.784032, 0.000000, X, Y) && !ellipse(24910.544000, 27113.208000, 1182.584034, 1182.584034, 0.000000, X, Y) && !ellipse(23250.696320, 26070.942780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26187.880890, 24927.514587, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 12:34:21 2011] Writing fullrun_mos1_xmm0551850201_pi300-10000_pass1_cl_src19.gif
[Sun Dec 18 12:56:37 2011] Mean detx,y = (-1451.64, -800.14) 
[Sun Dec 18 12:56:40 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 12:56:52 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 12:56:53 2011] Setting source spectrum file to fullrun_mos1_xmm0551850201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Dec 18 12:56:53 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0551850201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Dec 18 16:04:22 2011] Updating aperture counts using extracted products
[Sun Dec 18 16:04:22 2011] Error reading totcts from fullrun_mos1_xmm0551850201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Dec 18 16:04:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 16:04:24 2011] Using photon index=1.80, rate=0.00555, arf fullrun_mos1_xmm0551850201_pi300-10000_pass1_cl_src19.arf
[Sun Dec 18 16:04:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 16:04:24 2011] Updating source flux to 5.3e-14
[Sun Dec 18 16:04:33 2011] Flag b found in src. 19 procflags, skipping spectral fitting
[Sun Dec 18 16:04:33 2011] Flag c found in src. 19 procflags, skipping spectral fitting