[Tue May 15 15:09:22 2012] Detection parameters:
  Position = (286.0, 294.1) = 7 44 52.70 39 27 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8190.9 +/- 113.2
  Background counts = 243.1
  Rate = 0.2 +/- 0.003

[Tue May 15 15:09:23 2012] Off-axis axis estimate = 0.96'
[Tue May 15 15:15:24 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Tue May 15 15:15:24 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Tue May 15 15:15:24 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Tue May 15 15:15:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.91"
[Tue May 15 16:32:26 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 15 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_src1.csv
[Tue May 15 16:32:26 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 15 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_src1.csv
[Tue May 15 16:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 16:32:27 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 15 16:32:27 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 15 16:32:27 2012] Fit fullrun_pn_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 15 19:03:23 2012] Spatial fit model total counts = 10620.700000, observed total counts = 10639.000000
[Tue May 15 19:03:23 2012] Offset between fit and detection position for source 1 = 0.312874 pixels
[Tue May 15 19:03:23 2012] 10708.270000 total counts/ 4648.750000 bgd. counts: snr = 88.873059
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.312874 pixels
  Position = (285.8, 294.4) = 7 44 52.75 39 27 25.4
  Extent = 11.0 (10.5-11.2)", rotation angle = 0
  Source counts = 6059.5 +/- 103.5
  Background counts = 4648.8
  Rate = 0.2 +/- 0.003
[Tue May 15 19:03:23 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:23 2012] Assessing source extent using major axis lower bound
[Tue May 15 19:03:23 2012] Source does appear to be extended
[Tue May 15 19:03:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 19:03:23 2012] Source is confused with source 12
[Tue May 15 19:03:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 19:03:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 19:03:58 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Tue May 15 19:03:58 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Tue May 15 19:03:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.97"
[Tue May 15 20:15:49 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 15 20:15:49 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 15 20:15:49 2012] Fit fullrun_pn_xmm0551850101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue May 15 20:15:49 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 15 20:15:49 2012] fullrun_pn_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 15 20:15:49 2012] Fit fullrun_pn_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 15 22:28:39 2012] Spatial fit model total counts = 12107.700000, observed total counts = 12369.000000
[Tue May 15 22:28:39 2012] Offset between fit and detection position for source 1 = 0.171213 pixels
[Tue May 15 22:28:39 2012] 12205.970000 total counts/ 5349.880000 bgd. counts: snr = 93.735584
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.171213 pixels
  Position = (286.0, 294.3) = 7 44 52.69 39 27 25.1
  Extent = 12.7" x 11.6", rotation angle = 0
  Source counts = 6856.1 +/- 110.5
  Background counts = 5349.9
  Rate = 0.2 +/- 0.003
[Tue May 15 22:28:39 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:39 2012] Assessing source extent using major
[Tue May 15 22:28:39 2012] Source does appear to be extended
[Tue May 15 22:28:39 2012] Computing asymmetry using major and minor axis, asym = 1.10
[Tue May 15 22:29:11 2012] Counts = 6856.090000, rescaling region sizes by 2.000000
[Tue May 15 22:29:11 2012] XMMSAS src. selection expression = ellipse(24831.831040, 25559.761845, 1524.931157, 1388.391461, 0.000000, X, Y)
[Tue May 15 22:29:11 2012] Writing source region out to fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 15 22:29:11 2012] Extracting stamp from image fullrun_pn_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (198, 207) - (374, 382)
[Tue May 15 22:29:11 2012] XMMSAS bgd. selection expression = annulus(24831.831040, 25559.761845, 5083.103856, 10166.207711, X, Y) && !ellipse(25930.982000, 23649.018000, 817.175069, 404.133490, 134.853984, X, Y) && !ellipse(32059.687927, 15589.473877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.097290, 25263.147461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34199.102570, 31605.906250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.873230, 28657.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25586.366000, 27444.128000, 1718.416049, 1718.416049, 0.000000, X, Y) && !ellipse(24990.798800, 26528.152000, 1134.696033, 1134.696033, 0.000000, X, Y) && !ellipse(23942.384000, 25994.655000, 349.984010, 349.984010, 0.000000, X, Y) && !ellipse(24161.002319, 24583.388275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25394.940460, 24154.962128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20425.145111, 14838.305023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23654.075800, 21329.403000, 450.392013, 450.392013, 0.000000, X, Y) && !ellipse(32767.616974, 20329.755219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18990.946075, 19914.681213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26197.347804, 19541.959927, 508.328004, 368.035939, 322.420138, X, Y) && !ellipse(28119.234161, 17609.858246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15265.513840, 17485.788727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19345.574356, 16604.011017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33795.269958, 15693.375793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21658.675705, 15203.498993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14762.453491, 35700.874756, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 15 22:29:11 2012] Writing fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1.gif
[Tue May 15 22:29:48 2012] Mean detx,y = (17.30, 1298.00) 
[Tue May 15 22:29:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 22:33:57 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 22:33:57 2012] Setting source spectrum file to fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 15 22:33:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 16 01:17:03 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:03 2012] Error reading totcts from fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 01:17:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:05 2012] Using photon index=1.80, rate=0.181, arf fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1.arf
[Wed May 16 01:17:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:05 2012] Updating source flux to 4.1e-13
[Wed May 16 01:19:48 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed May 16 01:21:15 2012] Reading fit data from xmm0551850101/analysis//spectral/fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 16 01:21:15 2012] Spectral fit parameter nH value = 1.20109e+21
[Wed May 16 01:21:15 2012] Spectral fit parameter PhoIndex value = 2.03319
[Wed May 16 01:21:15 2012] Failed to get F(0.3-8.0) from xmm0551850101/analysis//spectral/fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 16 01:21:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:21:15 2012] Using Nh = 1.2e+21, photon index=2.03, rate=0.181, arf fullrun_pn_xmm0551850101_pi300-10000_pass1_cl_src1.arf
[Wed May 16 01:21:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:21:15 2012] Updating source flux to 4.7e-13