[Tue May 15 15:10:43 2012] Detection parameters:
  Position = (234.3, 171.1) = 7 45 12.06 39 18 29.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.4 +/- 14.2
  Background counts = 32.2
  Rate = 0.003 +/- 0.0005

[Tue May 15 15:10:44 2012] Off-axis axis estimate = 10.34'
[Tue May 15 17:41:00 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Tue May 15 17:41:00 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Tue May 15 17:41:00 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Tue May 15 17:41:00 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.60"
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src11.csv
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src11.csv
[Tue May 15 19:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 15 19:03:12 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue May 15 19:03:40 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.682724 pixels away
[Tue May 15 19:03:40 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:40 2012] Assessing source extent using major
[Tue May 15 19:03:40 2012] Source does appear to be extended
[Tue May 15 19:03:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 21:13:31 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Tue May 15 21:13:31 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Tue May 15 21:13:31 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Tue May 15 21:13:31 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.60"
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src11.csv
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src11.csv
[Tue May 15 22:28:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 15 22:28:29 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May 15 22:28:54 2012] Spatial fit model total counts = 341.000000, observed total counts = 341.000000
[Tue May 15 22:28:54 2012] Offset between fit and detection position for source 9 = 0.282157 pixels
[Tue May 15 22:28:54 2012] 340.669100 total counts/ 285.762000 bgd. counts: snr = 3.248077
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.282157 pixels
  Position = (234.4, 171.4) = 7 45 12.02 39 18 30.2
  Extent = 6.3 (3.8-8.7)", rotation angle = 0
  Source counts = 54.9 +/- 18.5
  Background counts = 285.8
  Rate = 0.001 +/- 0.0003
[Tue May 15 22:28:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:54 2012] Assessing source extent using major axis lower bound
[Tue May 15 22:28:54 2012] Source does appear to be extended
[Tue May 15 22:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 00:25:35 2012] XMMSAS src. selection expression = ellipse(20341.439000, 14863.780200, 380.346011, 380.346011, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing source region out to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src9_src.reg
[Wed May 16 00:25:35 2012] Extracting stamp from image fullrun_mos2_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (213, 150) - (256, 193)
[Wed May 16 00:25:35 2012] XMMSAS bgd. selection expression = annulus(20341.439000, 14863.780200, 633.910018, 1267.820036, X, Y) && !ellipse(21662.106400, 15171.924400, 433.271212, 433.271212, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src9.gif
[Wed May 16 00:35:03 2012] Mean detx,y = (-6112.65, 8380.53) 
[Wed May 16 00:35:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 00:35:17 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 00:35:18 2012] Setting source spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 16 00:35:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 16 01:02:01 2012] Not generating rmf since there are only 54 counts
[Wed May 16 01:02:01 2012] rmf not generated due to insufficient counts
[Wed May 16 01:17:10 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:10 2012] Error reading totcts from fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 16 01:17:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:12 2012] Using photon index=1.80, rate=0.00102, arf fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src9.arf
[Wed May 16 01:17:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:12 2012] Updating source flux to 2.1e-14
[Wed May 16 01:18:17 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting