[Tue May 15 15:10:43 2012] Detection parameters:
  Position = (304.9, 300.6) = 7 44 45.59 39 27 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.9 +/- 14.6
  Background counts = 41.2
  Rate = 0.001 +/- 0.0003

[Tue May 15 15:10:44 2012] Off-axis axis estimate = 0.49'
[Tue May 15 17:41:00 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Tue May 15 17:41:00 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Tue May 15 17:41:00 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.966
[Tue May 15 17:41:00 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 6.67"
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src22.ximg exists
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue May 15 19:03:12 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src22 appears to have run properly
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue May 15 19:03:12 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Tue May 15 19:03:40 2012] Spatial fit model total counts = 754.274000, observed total counts = 751.000000
[Tue May 15 19:03:40 2012] Offset between fit and detection position for source 27 = 6.402007 pixels
[Tue May 15 19:03:40 2012] 740.244000 total counts/ 570.540000 bgd. counts: snr = 7.104754
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 6.402007 pixels
  Position = (298.9, 298.4) = 7 44 47.85 39 27 42.8
  Extent = 13.3 (6.3-26.7)" x 13.3 (9.0-26.7)", rotation angle = 0 (335-0) degrees
  Source counts = 169.7 +/- 27.2
  Background counts = 570.5
  Rate = 0.003 +/- 0.0005
[Tue May 15 19:03:40 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:40 2012] Assessing source extent using major axis lower bound
[Tue May 15 19:03:40 2012] Source does appear to be extended
[Tue May 15 19:03:40 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.24
[Tue May 15 21:13:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 21:13:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 21:13:31 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Tue May 15 21:13:31 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.962
[Tue May 15 21:13:31 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 13.35"
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src22.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src22.csv
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src22.csv
[Tue May 15 22:28:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue May 15 22:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue May 15 22:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 15 22:28:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:54 2012] Warning, spatial fit 22 centroid is now closest to src. 25
[Tue May 15 22:28:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:54 2012] Assessing source extent using major axis lower bound
[Tue May 15 22:28:54 2012] Source does appear to be extended
[Tue May 15 22:28:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.24
[Wed May 16 00:25:35 2012] XMMSAS src. selection expression = ellipse(25952.514000, 25912.782000, 800.976023, 800.976023, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing source region out to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src27_src.reg
[Wed May 16 00:25:35 2012] Extracting stamp from image fullrun_mos2_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (253, 252) - (345, 344)
[Wed May 16 00:25:35 2012] XMMSAS bgd. selection expression = annulus(25952.514000, 25912.782000, 1334.960038, 2669.920077, X, Y) && !ellipse(24827.831600, 25574.437000, 903.696026, 903.696026, 0.000000, X, Y) && !ellipse(25898.095800, 23485.919400, 395.676811, 395.676811, 0.000000, X, Y) && !ellipse(23960.088287, 25955.236603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24016.080200, 25367.535248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.718600, 28048.647600, 635.881461, 635.881461, 0.000000, X, Y) && !ellipse(24774.422200, 26701.700000, 1135.600033, 1135.600033, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src27.gif
[Wed May 16 00:40:41 2012] Mean detx,y = (955.54, -1584.16) 
[Wed May 16 00:40:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 00:40:57 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 00:40:57 2012] Setting source spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed May 16 00:40:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed May 16 01:17:11 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:11 2012] Error reading totcts from fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed May 16 01:17:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:12 2012] Using photon index=1.80, rate=0.00315, arf fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src27.arf
[Wed May 16 01:17:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:12 2012] Updating source flux to 3.2e-14