[Tue May 15 15:10:43 2012] Detection parameters:
  Position = (287.0, 312.9) = 7 44 52.32 39 28 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.9 +/- 13.6
  Background counts = 39.7
  Rate = 0.001 +/- 0.0003

[Tue May 15 15:10:44 2012] Off-axis axis estimate = 1.34'
[Tue May 15 17:41:00 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue May 15 17:41:00 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue May 15 17:41:00 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Tue May 15 17:41:00 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.10"
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src28.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src28.csv
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src28.csv
[Tue May 15 19:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue May 15 19:03:12 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue May 15 19:03:40 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.058883 pixels away
[Tue May 15 19:03:40 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:40 2012] Assessing source extent using major
[Tue May 15 19:03:40 2012] Source does appear to be extended
[Tue May 15 19:03:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 21:13:31 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue May 15 21:13:31 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue May 15 21:13:31 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Tue May 15 21:13:31 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.10"
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src28.ximg exists
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue May 15 22:28:28 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue May 15 22:28:29 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue May 15 22:28:54 2012] Spatial fit model total counts = 2138.830000, observed total counts = 2713.000000
[Tue May 15 22:28:54 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 15 22:28:54 2012] Spatial fit model total counts = 757.512000, observed total counts = 756.000000
[Tue May 15 22:28:54 2012] Offset between fit and detection position for source 25 = 5.668331 pixels
[Tue May 15 22:28:54 2012] 743.462000 total counts/ 630.047000 bgd. counts: snr = 4.518393
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 5.668331 pixels
  Position = (285.3, 307.5) = 7 44 52.94 39 28 22.2
  Extent = 14.2 (14.2-28.4)", rotation angle = 0
  Source counts = 113.4 +/- 27.3
  Background counts = 630.0
  Rate = 0.002 +/- 0.0005
[Tue May 15 22:28:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:54 2012] Assessing source extent using major axis lower bound
[Tue May 15 22:28:54 2012] Source does appear to be extended
[Tue May 15 22:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 00:25:35 2012] XMMSAS src. selection expression = ellipse(24774.422200, 26701.700000, 851.700025, 851.700025, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing source region out to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src25_src.reg
[Wed May 16 00:25:35 2012] Extracting stamp from image fullrun_mos2_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (236, 259) - (334, 356)
[Wed May 16 00:25:35 2012] XMMSAS bgd. selection expression = annulus(24774.422200, 26701.700000, 1419.500041, 2839.000082, X, Y) && !ellipse(24827.831600, 25574.437000, 903.696026, 903.696026, 0.000000, X, Y) && !ellipse(25898.095800, 23485.919400, 395.676811, 395.676811, 0.000000, X, Y) && !ellipse(23960.088287, 25955.236603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24016.080200, 25367.535248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.718600, 28048.647600, 635.881461, 635.881461, 0.000000, X, Y) && !ellipse(25952.514000, 25912.782000, 1067.968031, 1067.968031, 0.000000, X, Y) && !ellipse(21694.258408, 29802.132446, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src25.gif
[Wed May 16 00:44:53 2012] Mean detx,y = (188.21, -2308.87) 
[Wed May 16 00:44:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 00:45:17 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 00:45:17 2012] Setting source spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed May 16 00:45:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed May 16 01:17:11 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:11 2012] Error reading totcts from fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed May 16 01:17:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:12 2012] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src25.arf
[Wed May 16 01:17:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:12 2012] Updating source flux to 2.1e-14
[Wed May 16 01:18:17 2012] Flag p found in src. 25 procflags, skipping spectral fitting