[Tue May 15 15:10:43 2012] Detection parameters:
  Position = (249.9, 343.1) = 7 45 6.25 39 31 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 12.1
  Background counts = 34.7
  Rate = 0.001 +/- 0.0003

[Tue May 15 15:10:44 2012] Off-axis axis estimate = 4.78'
[Tue May 15 17:41:00 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Tue May 15 17:41:00 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Tue May 15 17:41:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978
[Tue May 15 17:41:00 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.82"
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src23.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src23.csv
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src23.csv
[Tue May 15 19:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue May 15 19:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:03:40 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.835821 pixels away
[Tue May 15 19:03:40 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:40 2012] Assessing source extent using major
[Tue May 15 19:03:40 2012] Source does appear to be extended
[Tue May 15 19:03:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 21:13:31 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Tue May 15 21:13:31 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Tue May 15 21:13:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978
[Tue May 15 21:13:31 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.82"
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src23.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src23.csv
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src23.csv
[Tue May 15 22:28:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue May 15 22:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue May 15 22:28:29 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue May 15 22:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue May 15 22:28:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:54 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.835821 pixels away
[Tue May 15 22:28:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:54 2012] Assessing source extent using major
[Tue May 15 22:28:54 2012] Source does appear to be extended
[Tue May 15 22:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 00:25:35 2012] XMMSAS src. selection expression = ellipse(21694.258408, 29802.132446, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing source region out to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src21_src.reg
[Wed May 16 00:25:35 2012] Extracting stamp from image fullrun_mos2_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (212, 306) - (287, 381)
[Wed May 16 00:25:35 2012] XMMSAS bgd. selection expression = annulus(21694.258408, 29802.132446, 1087.500000, 2175.000000, X, Y) && !ellipse(20633.319321, 29509.280060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24774.422200, 26701.700000, 1135.600033, 1135.600033, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src21.gif
[Wed May 16 00:41:05 2012] Mean detx,y = (-2306.00, -6045.12) 
[Wed May 16 00:41:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 00:41:42 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 00:41:42 2012] Setting source spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 16 00:41:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed May 16 01:09:45 2012] Not generating rmf since there are only 55 counts
[Wed May 16 01:09:45 2012] rmf not generated due to insufficient counts
[Wed May 16 01:17:11 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:11 2012] Error reading totcts from fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 16 01:17:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:12 2012] Using photon index=1.80, rate=0.00129, arf fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src21.arf
[Wed May 16 01:17:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:12 2012] Updating source flux to 1.6e-14
[Wed May 16 01:18:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting