[Tue May 15 15:10:42 2012] Detection parameters:
  Position = (285.9, 294.1) = 7 44 52.71 39 27 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3476.8 +/- 71.7
  Background counts = 41.2
  Rate = 0.06 +/- 0.001

[Tue May 15 15:10:44 2012] Off-axis axis estimate = 0.96'
[Tue May 15 17:41:00 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Tue May 15 17:41:00 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Tue May 15 17:41:00 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Tue May 15 17:41:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.91"
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src1.csv
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 15 19:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src1.csv
[Tue May 15 19:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 15 19:03:12 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 15 19:03:12 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 15 19:03:40 2012] Spatial fit model total counts = 6168.720000, observed total counts = 5744.000000
[Tue May 15 19:03:40 2012] Offset between fit and detection position for source 1 = 0.376348 pixels
[Tue May 15 19:03:40 2012] 6007.180000 total counts/ 2858.680000 bgd. counts: snr = 58.887203
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.376348 pixels
  Position = (285.9, 294.5) = 7 44 52.72 39 27 25.9
  Extent = 10.3 (9.7-10.8)", rotation angle = 0
  Source counts = 3148.5 +/- 77.5
  Background counts = 2858.7
  Rate = 0.06 +/- 0.001
[Tue May 15 19:03:40 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:40 2012] Assessing source extent using major axis lower bound
[Tue May 15 19:03:40 2012] Source does appear to be extended
[Tue May 15 19:03:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 21:13:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 21:13:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 21:13:31 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Tue May 15 21:13:31 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.917
[Tue May 15 21:13:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.27"
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src1.csv
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 15 22:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src1.csv
[Tue May 15 22:28:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 15 22:28:28 2012] fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 15 22:28:28 2012] Fit fullrun_mos2_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 15 22:28:54 2012] Spatial fit model total counts = 6780.200000, observed total counts = 6502.000000
[Tue May 15 22:28:54 2012] Offset between fit and detection position for source 1 = 0.039082 pixels
[Tue May 15 22:28:54 2012] 6648.720000 total counts/ 3031.050000 bgd. counts: snr = 65.710141
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.039082 pixels
  Position = (285.9, 294.5) = 7 44 52.71 39 27 25.8
  Extent = 11.3 (10.8-11.8)", rotation angle = 0
  Source counts = 3617.7 +/- 81.5
  Background counts = 3031.1
  Rate = 0.07 +/- 0.002
[Tue May 15 22:28:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:54 2012] Assessing source extent using major axis lower bound
[Tue May 15 22:28:54 2012] Source does appear to be extended
[Tue May 15 22:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 00:25:35 2012] Counts = 3617.670000, rescaling region sizes by 2.000000
[Wed May 16 00:25:35 2012] XMMSAS src. selection expression = ellipse(24827.831600, 25574.437000, 1355.544039, 1355.544039, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing source region out to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1_src.reg
[Wed May 16 00:25:35 2012] Extracting stamp from image fullrun_mos2_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (208, 217) - (364, 372)
[Wed May 16 00:25:35 2012] XMMSAS bgd. selection expression = annulus(24827.831600, 25574.437000, 4518.480130, 9036.960260, X, Y) && !ellipse(32427.451965, 25292.870514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25898.095800, 23485.919400, 395.676811, 395.676811, 0.000000, X, Y) && !ellipse(23960.088287, 25955.236603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15928.097600, 32349.502400, 614.337618, 398.643523, 146.400000, X, Y) && !ellipse(26186.011749, 19554.028671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.836945, 17623.444031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18002.372467, 15796.981674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32740.394958, 28645.482208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24016.080200, 25367.535248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.718600, 28048.647600, 635.881461, 635.881461, 0.000000, X, Y) && !ellipse(25952.514000, 25912.782000, 1067.968031, 1067.968031, 0.000000, X, Y) && !ellipse(21694.258408, 29802.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34179.248260, 31605.093811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32753.221405, 20336.698120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20633.319321, 29509.280060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24774.422200, 26701.700000, 1135.600033, 1135.600033, 0.000000, X, Y)
[Wed May 16 00:25:35 2012] Writing fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1.gif
[Wed May 16 00:25:49 2012] Mean detx,y = (131.54, -1474.24) 
[Wed May 16 00:25:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 00:30:44 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 00:30:44 2012] Setting source spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 00:30:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 16 01:17:10 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:10 2012] Error reading totcts from fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 01:17:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:11 2012] Using photon index=1.80, rate=0.0671, arf fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1.arf
[Wed May 16 01:17:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:11 2012] Updating source flux to 6e-13
[Wed May 16 01:19:48 2012] Reading fit data from xmm0551850101/analysis//spectral/fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 16 01:19:48 2012] Spectral fit parameter nH value = 1.18223e+21
[Wed May 16 01:19:48 2012] Spectral fit parameter PhoIndex value = 1.93395
[Wed May 16 01:19:48 2012] Failed to get F(0.3-8.0) from xmm0551850101/analysis//spectral/fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 16 01:19:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:19:48 2012] Using Nh = 1.2e+21, photon index=1.93, rate=0.0671, arf fullrun_mos2_xmm0551850101_pi300-10000_pass1_cl_src1.arf
[Wed May 16 01:19:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:19:48 2012] Updating source flux to 6.3e-13