[Tue May 15 15:09:59 2012] Detection parameters:
  Position = (377.2, 234.6) = 7 44 18.46 39 23 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.7 +/- 11.5
  Background counts = 40.1
  Rate = 0.001 +/- 0.0002

[Tue May 15 15:10:00 2012] Off-axis axis estimate = 7.35'
[Tue May 15 16:32:27 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Tue May 15 16:32:27 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Tue May 15 16:32:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.502
[Tue May 15 16:32:27 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.10"
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src27.ximg exists
[Tue May 15 17:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src27.csv
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue May 15 17:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src27.csv
[Tue May 15 17:41:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue May 15 17:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May 15 17:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 15 17:41:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:03:31 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.712757 pixels away
[Tue May 15 19:03:31 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:31 2012] Assessing source extent using major
[Tue May 15 19:03:31 2012] Source does appear to be extended
[Tue May 15 19:03:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 20:15:50 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Tue May 15 20:15:50 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Tue May 15 20:15:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.502
[Tue May 15 20:15:50 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 10.10"
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src24.ximg exists
[Tue May 15 21:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src24.csv
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue May 15 21:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src24.csv
[Tue May 15 21:13:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue May 15 21:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue May 15 21:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 15 21:13:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:47 2012] Spatial fit model total counts = 380.676000, observed total counts = 252.000000
[Tue May 15 22:28:47 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 15 22:28:47 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:47 2012] Assessing source extent using major
[Tue May 15 22:28:47 2012] Source does appear to be extended
[Tue May 15 22:28:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 23:35:39 2012] XMMSAS src. selection expression = ellipse(32766.706299, 20360.106186, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 23:35:39 2012] Writing source region out to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src20_src.reg
[Tue May 15 23:35:39 2012] Extracting stamp from image fullrun_mos1_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (340, 197) - (415, 272)
[Tue May 15 23:35:39 2012] XMMSAS bgd. selection expression = annulus(32766.706299, 20360.106186, 1087.500000, 2175.000000, X, Y)
[Tue May 15 23:35:39 2012] Writing fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src20.gif
[Tue May 15 23:50:50 2012] Mean detx,y = (5227.64, -7313.51) 
[Tue May 15 23:50:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 23:51:23 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 23:51:23 2012] Setting source spectrum file to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue May 15 23:51:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed May 16 00:24:05 2012] Not generating rmf since there are only 67 counts
[Wed May 16 00:24:05 2012] rmf not generated due to insufficient counts
[Wed May 16 01:17:08 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:08 2012] Error reading totcts from fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May 16 01:17:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:10 2012] Using photon index=1.80, rate=0.00122, arf fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src20.arf
[Wed May 16 01:17:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:10 2012] Updating source flux to 2.3e-14
[Wed May 16 01:17:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting